CLAMPER || ECT202 ANALOG CIRCUITS || EC205 || ECT 281 ELECTRONIC CIRCUITS || KTU
This video explains Non linear wave shaping circuit-Clamper
This topic is also in the syllabus for
1. ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
2. CS 207 Electronic Devices and Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmh9Royg7s7B78IiWpou-lE0
3.ECT 281 Electronic Circuits ( Minor): https://youtube.com/playlist?list=PL2UV2EJdMQmiduKsGRgNFuu_MqB__HVpN
#circuits #ktu #ece #electroniccircuits
hi all, we have've equated linear wave shaping circuits in two categories
which are linear wave shaping circuits and non-linear wave shaping circuits
via linear wave shaping circuits, comes RC circuit
via non-linear wave shaping circuits, there comes Clipper, Clipper, Clamper
We have learnt RC circuit, high pass and low pass, different signals input, clipping and clipping.
So today we are discussing about Clamp base.
Clamp base is an example of non-linear wave shaping circuits.
What are Clamping circuits?
Why we are using Clamping circuits?
Clamping circuits are used to add or subtract DC voltage to a given waveform without changing shape.
Why we are using Clamping circuits?
Clamping circuits are used to add or subtract DC voltage to a given waveform without changing shape.
Why we are using Clamping circuits?
Clamping circuits are used to add or subtract DC voltage to a given waveform without changing shape.
Why we are using Clamping circuits?
Clamping circuits are used to add or subtract DC voltage to a given waveform without changing shape.
Clamping circuits introduce a DC component.
Clamping circuits introduce DC components.
Clamping circuits are also called DC Restorer or DC Inserter.
We are using only linear elements or passive elements in linear wave shaping circuits.
We are using active devices along with passive devices.
We have studied R-C circuit and Clipper.
Today we are discussing about Clamping circuits.
Clamping circuits are used to add or subtract DC voltage to a given waveform without changing shape.
Clamping circuits introduce a DC component.
Clamping circuits are also called DC Restorer or DC Inserter.
Let us see Clamping circuits one by one.
First, let us discuss Positive Clamper.
This is the circuit diagram of a Positive Clamper.
There are few things to note when we draw a Positive Clamper.
When we draw a positive Clamper, we can easily understand it.
This is the input waveform Vin.
This is a capacitor used to add or subtract DC voltage.
This is an electrolytic capacitor with polarity.
When we draw a positive Clamper, we need to draw it in a way that the diode is in reverse bias.
If the diode is in reverse bias, the positive and negative will come up.
If the diode is in reverse bias, the negative of the diode should come up.
This is the output of the circuit.
We need to draw the polarity of the capacitor.
If the diode has a positive polarity, the positive of the capacitor should be in the reverse bias.
If the diode has a negative polarity, the positive of the capacitor should be in the reverse bias.
This is how we draw a positive Clamper.
The positive of the capacitor should be in the n-region of the diode.
When the diode has a negative Clamper, the negative of the capacitor should come up.
When the diode has a positive Clamper, the positive of the capacitor should be in the n-region of the diode.
Now, let's see how it works.
First, we need to consider the case where the diode is conducting.
When does the diode conduct?
When there is a negative voltage, the diode conducts.
The diode conducts when the input voltage is negative.
During negative half cycle, the diode conducts.
In this negative half cycle, the diode conducts.
During negative half cycle, the diode conducts.
There is a current flow.
The amplitude of the current is Vm.
During negative half cycle, the diode conducts.
the capacitor will start charging when this diode is connected in the negative half cycle.
The capacitor will charge in the negative half cycle.
This capacitor will charge.
Where will this capacitor charge?
It will charge in the Vm volt.
In the previous negative half cycle,
this diode will be connected.
As the diode is connected, this capacitor will charge in the Vm.
Okay.
The capacitor will charge in the Vm.
What will be the charge in the capacitor?
The charge in the capacitor will be Vm.
Since the terminal of the capacitor is positive,
what will be the voltage here?
It will be plus Vm.
The voltage here will be plus Vm.
Okay.
The voltage here will be plus Vm.
Now, look.
Pay attention.
The negative half cycle is over.
Now, look at the positive half cycle.
This is a positive half cycle.
What will happen in this positive half cycle?
In this positive half cycle,
a positive input is coming here.
A positive input is coming.
When a positive input is coming,
this diode...
Was this capacitor not plus Vm earlier?
The plus Vm of this capacitor
is coming to the negative of this diode.
The plus Vm of this capacitor
is coming to the negative of this diode.
It is coming to the n-region of this diode.
Then, this diode will be reverse biased.
When this capacitor is charged,
this diode will be reverse biased.
Now, look at the positive half cycle.
A positive voltage is coming here.
This diode is already reverse biased.
Moreover, there is a DC voltage here.
It is called Vm.
Then, to this Vm,
zero is coming.
Earlier, it was zero.
Now, the ground level is
switched to the plus Vm voltage.
Now, from where will the input start?
It will start from the Vm voltage.
Already, there is a DC voltage here.
The DC voltage coming here is
plus Vm.
Moreover, to forward bias this diode,
there is a diode's main voltage.
What is the diode's main voltage?
It is called V gamma.
If it is silicon,
its value is 0.6.
This V gamma is between
the peak of the diode and the n-region.
Then, the voltage coming here
at this point
is Vm minus V gamma.
The voltage coming at this point
is Vm minus V gamma.
Since the ground level capacitor is here,
because of the DC voltage stored in the capacitor,
where will the ground level shift?
It will shift to Vm minus V gamma.
So, where will the positive half cycle start?
It will start from Vm minus V gamma.
When Vm minus V gamma is added,
when Vm volt is added,
the input is Vm, right?
The peak value is Vm.
When Vm is added,
it comes to V gamma or 0.6.
The positive half cycle is over.
Now, look at this.
When the negative half cycle comes,
what is this diode?
It is a reverse bias.
If it is negative,
the diode is already
reverse biased with this plus Vm minus V gamma.
The capacitor has to be charged.
In the positive half cycle,
there is no need to discharge the capacitor.
When the negative half cycle comes,
the capacitor is maintained as a reverse bias.
In the negative half cycle,
the voltage from Vm minus V gamma
is reduced.
The voltage is reduced
correspondingly.
It is reduced here also.
When Vm voltage is added,
the value is Vm.
When negative Vm minus Vm is added,
what will happen?
When negative Vm is added,
the value is Vm minus 0.6
minus Vm.
When the peak value is minus,
the corresponding value is
minus 0.6.
This is the working of
positive clipper.
This is the working of positive clipper.
During positive half cycle,
diode conducts
and capacitor charges towards Vm
in positive direction.
During positive half cycle,
capacitor cannot discharge.
During negative half cycle,
diode conducts
and capacitor charges towards Vm.
During positive half cycle,
capacitor cannot discharge.
Moreover,
diode conducts
as a reverse bias.
So, capacitor acts as
a DC source of Vm volt
that is connected in series
with input.
The capacitor acts as a DC source.
It is connected in series
with input.
The output voltage is
equal to Vout plus Vin.
The output voltage is equal to
Vout plus Vin.
The output voltage is equal to
Vout plus Vin.
Vm minus V gamma
is the practical case.
Ideally, Vm plus Vin is the case.
Here, the capacitor gets
charged to Vm.
It reverse biases the diode
and
for any DC component,
diode does not conduct.
and for any DC component,
diode does not conduct.
Next is negative clamper.
When we talk about negative clamper,
remember that
we are clamping
towards negative.
That means,
all the signal in the input
should be clamped downwards.
All the signal in the input
should be clamped
downwards.
Upward movement
is called negative clamping.
Upward movement is called
positive clamping.
When we talk about negative clamper,
a negative voltage
should act as a DC voltage.
It is easy to draw the diagram.
Input is Vin.
Capacitor is negative.
Input is Vin.
Capacitor is negative.
Capacitor's output voltage
is negative.
Input is positive.
To reverse bias the diode,
input is positive.
Input is negative.
Input is positive.
Working is the same.
There is no difference.
This is the circuit diagram
of negative clamper.
Here,
in a positive half cycle,
this diode conducts.
This diode conducts
only in positive half cycle.
In starting positive half cycle,
this diode conducts.
When this diode conducts,
current flows like this.
When current flows like this,
this capacitor charges.
Maximum value in positive half cycle
is Vm.
This capacitor charges
to Vm.
This capacitor charges to Vm.
The voltage here
is
minus Vm.
The voltage here
is minus Vm.
Here, it is negative.
So, it is minus Vm plus V gamma.
V gamma is the voltage of this capacitor.
V gamma.
If you want,
you can write minus Vm plus 0.6.
No problem.
The voltage
is stored in
this capacitor.
When we give input later,
in the next negative half cycle,
this diode is reverse biased.
Because, this minus Vm plus V gamma
in the next
positive half cycle and negative half cycle,
this diode is
reverse biased.
When we give input later,
as it is reverse biased,
the input is
the series of the capacitor
stored DC voltage.
Then, this input
and this DC voltage
will be added to get the output.
Now, look at this figure.
Before this,
there is a negative half cycle.
Before this,
there is a negative half cycle.
Before that, there is a positive half cycle.
The charging of the capacitor
is done here.
Now,
the voltage Vm
is stored in this capacitor.
The value is
minus Vm plus 0.6.
Now,
look at this input voltage.
In the positive half cycle,
this input voltage is the value
stored in the capacitor.
The value stored in the capacitor is
minus Vm plus 0.6.
This is the value stored in the capacitor.
The input
will be the series of
the capacitor.
The input stored in the capacitor
will be the series of
the capacitor voltage.
The positive maximum value is Vm.
To find out the positive maximum value,
to find out the positive maximum value,
we have to add
plus Vm.
The positive maximum value is 0.6.
In the positive half cycle,
the whole signal
will be shifted to
minus Vm plus 0.6.
will be shifted to
minus Vm plus 0.6.
will be shifted to
minus Vm plus 0.6.
The entire signal
will be clamped down.
This is what happens in the negative
clipper.
During positive half cycle, the diode conducts
and capacitor charges towards Vm.
During negative half cycle,
capacitor cannot discharge
since diode does not conduct.
Capacitor acts as a DC source of
Vm volt
connected in series with the input
voltage.
This is how it works.
The whole Vm
0

