RC LPF SQUARE WAVE INPUT || ECT202 ANALOG CIRCUITS || EC205 || ECT 281 ELECTRONIC CIRCUITS || KTU
This video explains how RC Low pass Filter responds to square wave input
This topic is also in the syllabus for
1. ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
2. EC205 Electronic Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmiePALNs84TJUONtzApG9pp
3. CS 207 Electronic Devices and Circuits: https://youtube.com/playlist?list=PL2UV2EJdMQmh9Royg7s7B78IiWpou-lE0
4.ECT 281 Electronic Circuits ( Minor): https://youtube.com/playlist?list=PL2UV2EJdMQmiduKsGRgNFuu_MqB__HVpN
#circuits #ktu #ece #electroniccircuits
Hi all, today we are discussing how a square wave input in a RC low pass filter will work.
We have already discussed the step input of a RC low pass filter. I think everyone understood that.
Today we are discussing how a square wave input in a RC low pass filter will work.
First, let us draw a circuit diagram of a low pass filter.
In a low pass filter, there is a resistor and a capacitor.
This is the circuit diagram of a low pass filter.
Here we are inputting Vi.
Here we are outputting Vo.
The input we are giving is a square wave.
This is the square wave input.
The peak value of this square wave is V.
Peak to peak value is 2V.
This is the input, Vi.
This time interval can be taken as T1.
This time interval can be taken as T2.
The total time period is T1 plus T2.
Now, we are inputting this square wave.
The output we are taking here is across the capacitor.
What is the output?
It is the voltage of the capacitor.
In a positive half cycle, when a positive voltage comes here,
the capacitor will charge.
The capacitor will charge.
The output voltage is the voltage that charges the capacitor.
We have to understand one thing.
Even though we have drawn it like this,
there was a negative half before this.
There was a negative half.
Then there was a positive half.
The square wave is moving like this.
The capacitor was charging at a particular value.
It was charging or discharging.
It was not negative.
It was discharging at a negative voltage.
When we give a plus V voltage here,
what does the capacitor do?
The capacitor starts charging.
The capacitor is charging.
Where is the capacitor charging?
It is charging at a V voltage.
But instead of reaching V,
when it reaches a value of V2,
what happens?
The transmission from high to low goes on.
When the transmission from high to low goes on,
what is the input?
It is a minus V voltage.
The voltage in the capacitor is a positive voltage.
The input we have given is a negative voltage.
What does the capacitor do?
It starts discharging.
What does the capacitor do in the next half cycle?
It discharges.
The diagram looks like this.
Where does it discharge?
When it discharges to the value V1,
where does it discharge?
It discharges to the minus V voltage.
But before it reaches minus V,
what happens?
What happens to the next transmission?
The transmission to plus V goes on.
But before it reaches minus V,
it discharges again.
This process keeps repeating.
The capacitor charges positively.
It discharges from V1 to V2.
Where does it discharge?
It discharges to plus V.
But before that,
what happens?
The next negative half cycle starts.
The capacitor discharges.
It discharges to minus V.
The next positive half cycle starts.
When we are giving a square wave input
to RC low pass filter,
we will get this kind of waveform.
We will get this kind of waveform.
Now let us see how it works.
To see how it works,
we first consider the time interval T1.
We consider this time interval.
This is T1.
In this time interval,
what does the capacitor do?
It charges to plus V.
It charges to this voltage.
Similarly,
in the time interval T1,
it charges to plus V.
In the time interval T2,
the capacitor discharges to minus V.
In the previous class,
we studied the general equation
of the capacitor voltage.
The general equation of the capacitor voltage
is V final minus V initial into
e raised to minus T divided by RC.
Now we can take each time interval
at T is equal to T1.
We took the time interval T1.
When we took the time interval T1,
the output voltage reached here.
It reached the output voltage V2.
What is the voltage of the capacitor
up to Vc?
The voltage of the capacitor is V2.
V2 is equal to V final.
We tried to charge the capacitor
up to V.
Before that,
the charging process stopped
when V2 reached here.
Vc is V2.
V final is plus V.
V minus V final is V minus V initial.
Where did the capacitor start charging?
It started from the voltage V1.
Instead of V1,
we can write V1 into
e raised to minus T1.
We denoted it as T, right?
It is T1.
So we can write T1 here.
e raised to minus T1 divided by RC.
At T is equal to T2,
where did the voltage of the capacitor
reach in the time interval T2?
It reached V1, right?
Then we can write
V1 is equal to
V final.
Where did it discharge?
It discharged to minus V, right?
When it discharged to minus V,
instead of V final,
we can write minus V
minus V final
minus V minus V initial.
Where did V initial start
discharging from?
It started from here.
Where did V initial start
discharging from?
It started from V2.
V2 into e raised to minus T2 divided by RC.
Okay.
Now let us see
if it is a symmetric condition,
this square wave is symmetric.
If it is symmetric,
T1 is equal to T2.
If the two time intervals
are same,
T1 is equal to T2 is equal to
T by 2,
this V1
and this V1
and this V2
will be equal.
V1 is equal to
minus V2
or V2 is equal to minus V1.
Okay.
V1 is equal to minus V2.
So, this is the response of
a square wave input
to RC low pass filter.
That is all we discussed.
We are giving a square wave input
to V1 and V2.
When we give a square wave input,
the capacitor charges at positive half
and discharges at negative half.
When the capacitor charges at positive half,
there was a value earlier.
There was a negative half before positive half.
Don't forget that.
The value that was discharged at that time
was V1.
It is charging from V1 to V.
But when it reaches V2,
the positive half changes to negative half.
What does the capacitor do
when it reaches V2?
It discharges.
It comes back to V1.
Then we get a waveform in this form.
What do we do in this?
We find the equation
for the voltage of the capacitor
at the time of T1 and T2.
So, this is all about
the response of
a square wave input
to RC low pass filter.
I hope everyone understood.
See you in the next class.

