SMALL SIGNAL ANALYSIS || ECT202 ANALOG CIRCUITS || KTU || Module 2
For full class
ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
#circuits #ktu #ece #electroniccircuits
Hi all. Today we are discussing about small signal analysis of BJT.
We can further classify our AC analysis into two parts, small signal analysis and large
signal analysis.
We are focusing on small signal analysis. Large signal analysis is the case of large
signal amplifiers. Large signal amplifiers are power amplifiers. In case of power amplifiers,
large signal analysis occurs. So we are focusing on small signal analysis.
In case of small signal analysis, we don't worry about the operating point. We have to
fix the Q point in the active region. If we want to make a transistor work as an amplifier,
we have to fix the Q point in the active region.
In case of small signal analysis, we don't have to worry about the operating point.
In case of large signal amplifiers, there will be some changes in the Q point. Let's
see how it is.
If we use a large signal, we have to fix the Q point in the active region. In case
of large signal amplifiers, there will be some changes in the Q point. Let's see how
it is.
In the case of large signal amplifiers, there will be some changes in the Q point. Let's
see how it is.
So, when we come to the case of small signal analysis, there is no change in the Q-point.
The magnitude of the small signal is the small voltage sufficient to operate the transistor in the active region.
Why in the active region?
To work as an amplifier, we have to fix the Q-point at the active region.
How to bias in the active region?
Emitter-based junction should be forward biased.
Collector-based junction should be reverse biased.
The total response can be divided into DC and AC responses.
I have drawn a rectangle portion here.
The portion inside the rectangle includes for the DC analysis.
Why we have considered this much for the DC analysis?
Here we are using capacitors CB and CC.
These two capacitors act as open circuit for the DC signal.
What does open circuit mean?
This portion here and this portion here are not related to each other.
Because CB and CC function as open circuit.
Similarly, CE also acts as open circuit.
That is why we have taken only this portion for the DC analysis.
For the AC analysis, we have to consider this entire circuit.
Why the capacitor acts as open circuit for DC and short circuit for AC?
You already know that.
Why the capacitor acts as open circuit for DC and short circuit for AC?
Let's see.
CB and CC are coupling capacitors.
Similarly, CE is a bypass capacitor.
CB, CC and CE are very high value capacitors.
We know the reactance equation for a capacitor.
Xc denotes reactance.
Xc is equal to 1 by j omega c.
This is the reactance equation for a capacitor.
Or we can write it as 1 by 2 pi fc.
If we do not consider j, we can write it as 1 by 2 pi fc.
Here, f is frequency and c is capacitance.
If we consider a DC signal, what is f?
f is zero.
In the case of DC, frequency is zero.
How about the DC signal?
This is a DC signal.
Where does this signal repeat?
Time period is infinity.
Frequency is equal to 1 by time period.
1 by time period is equal to 1 by infinity which is equal to zero.
In the case of DC signal, frequency is zero.
So, reactance is 1 by zero.
1 by zero is infinity.
Since reactance is infinity,
reactance is the resistance in the case of a capacitor.
It creates maximum resistance.
Maximum resistance is the open circuit of Cb, Cc and Ce in the case of DC.
But in the case of AC signal,
frequency is not equal to zero.
In addition, Cb, Cc and Ce are very high values.
Since Cb, Cc and Ce are very high values,
since frequency is not zero,
Xc is equal to 1 by 2 pi fc.
Since C is a large value,
Xc is approximately equal to zero.
What does approximately equal to zero mean?
In the case of AC signal,
capacitor acts as a short circuit.
In the case of DC signal,
capacitor acts as an open circuit.
In the case of AC signal,
capacitor acts as a short circuit.
In the case of DC signal,
capacitor acts as an open circuit.
The total capacitance is the short circuit.
In the case of AC signal,
capacitor acts as a short circuit.
The total capacitance is the short circuit.
In the next class,
we will discuss about AC response.
For AC response, we need to know the AC equivalent circuit and the corresponding AC equivalent circuit.
In the AC equivalent circuit, we need to know the equivalent circuit of the transistor.
We will replace the transistor with the equivalent circuit and then we will do the analysis.
We will see those things in the next lecture.
I hope everyone understood today's topic. See you in the next lecture.

