Hybrid Pi Model || ECT202 ANALOG CIRCUITS || KTU || Module 2
Topics Covered :
1. What is an equivalent model of transistor?
2. Why equivalent model?
3. Types of transistor equivalent models
4. What is hybrid- pi model?
5. Advantage of hybrid-pi model.
6. Full hybrid-pi model
7. Relationship between parameters used in hybrid pi model.
8. Simplified hybrid -pi model for low frequency.
For full class
ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
#circuits #ktu #ece #electroniccircuits
Hi all, in the last class we discussed about the AC equivalent circuit of a BJT amplifier.
Today we are discussing about the equivalent circuit or equivalent model of a transistor.
We will discuss about the equivalent model of a transistor,
then we will discuss about why we are using equivalent model,
and then we will discuss about the hybrid pi model mentioned in our syllabus.
Equivalent model is a combination of circuit elements.
It is chosen best to represent actual behavior of the device under specific operating point.
Equivalent model is chosen best to represent actual behavior of the device under specific operating point.
Why we are using equivalent model?
We cannot apply network theorems directly on practical devices.
So we need the equivalent model to use this theorem to find out different network parameters.
We are discussing about transistors.
Let's see the different equivalent models used in transistors.
The main equivalent models used in transistors are hybrid model, RE model and hybrid pi model.
These three models are commonly used.
We are going to learn about hybrid pi model in our syllabus.
I am going to give detailed explanation of hybrid pi model.
Hybrid model and RE model are used for transistor analysis.
Hybrid model and RE model are used for transistor low frequency analysis.
Hybrid pi model is used for high frequency analysis.
These two models are not used for high frequency analysis.
Only hybrid pi model is used for high frequency analysis.
Let's see what is hybrid pi model.
This figure shows the corresponding hybrid pi model of a transistor.
Hybrid pi model is an important model.
It is widely used because we can use it in high frequency small signals.
After making few simplifications, we can use it for low frequency small signals.
Hybrid pi model is used for high frequency small signal analysis.
After making few simplifications, we can use it for low frequency small signals.
We can use it for low frequency small signals.
These three models are used for high frequency small signals and low frequency small signals.
What is the reason because of which we can use hybrid pi model for high frequency small signals and not hybrid model and RE model?
In the case of hybrid pi model, we include parameters that do not appear in earlier two models.
These parameters provide more accurate model for high frequencies.
This figure is of hybrid pi model.
This is the full hybrid pi model of a transistor.
After sometime, we will perform some simplification and we will make it useful for low frequency as well.
After making few simplifications, we can use hybrid pi model for low frequency as well.
This is the full hybrid pi model of a transistor and we can perform some simplification in this circuit to make it useful for low frequency application.
In this model of transistor, we have added parameters which only come into play at high frequencies.
These components only came into play at high frequencies like these inter electrode capacitance and other parasitic elements.
So, first thing we have to do is to understand the parameters what are they and what they represent.
We have to understand what are the components and what they represent.
For that, I am going to start from Cµ.
Cµ is a capacitor.
Cµ is introduced to represent airy effect.
Cµ is introduced to represent airy effect of a transistor.
Cµ is usually just few pico farad.
Next capacitance is Cπ.
Cπ is a diffusion capacitance and it represents minority carrier storage in base region.
Cπ is used to represent minority carrier storage in base region of transistor.
CÉ0 value is less than 1 pico farad.
few picofarad
these are the two capacitors in our model
now we will talk about the resistors
resistances
first we take rb
there are many resistors
rb, rpi, rb, ro
lets start with rb
rb means
base contact resistance
rb value is very low
normally when we go for analysis
we do not use rb
rb is a very low value
so we can replace it with a short circuit
next is rpi
rpi is a resistor
this is rpi resistance
rpi is the input resistance
rpi is the input resistance of the transistor
and it is the resistor
rpi is the input resistance
and it is the resistance between
base terminal and emitter terminal
this is the base terminal of the transistor
rpi is the input resistance
and it is the resistance
between base terminal and emitter terminal
next
we have r mu
r mu
in some books
is used instead of r mu
r mu is the resistance
between base terminal and emitter terminal
this is the collector
it is the resistance between
base terminal and collector terminal
because of this fact, we call Rμ as terminal resistance
Rμ has a very large value
Rμ is considered as open circuit
RO is the output resistance
RPi is the small resistance between the base and emitter
CPi is the diffusion capacitance between base and emitter
Rmu is collector base reverse resistance
Cmu is transition capacitance between collector and base
Vbe is current source to indicate transistor action
Ro is output resistance
This is the full model of hybrid pi model
There are two types of hybrid pi model depending on the source
We have used voltage dependent current source
Voltage dependent current source is Vbe
Vbe is a current source that depends on the voltage Vbe
This type of hybrid pi model is called voltage controlled current source
If we have beta ib in the place of gm into Vbe
Then we have current controlled current source
If we have beta ib in the place of gm into Vbe
Then we have current controlled current source
Because the current is controlled by ib
The current is controlled by beta ib
So, the two names are corresponding to the collector current of the transistor
The ic is controlled by ib or base current
So, we can call it current controlled current source
In the voltage controlled current source, ic is gm into Vbe
The ic is controlled by Vbe
So, it is a voltage controlled current source
Here, we have used a voltage controlled current source
Now, we have to know some equations in this
You can use it if you ask problems
How to find rpi?
What is the relation between rpi and Re?
How to find ic?
How to find gm?
We have to discuss about this
First, we have to know the DC conditions of a transistor
We have studied about IE
What is IE?
Emitter current is equal to ic divided by alpha
This alpha is the current gain of the common base
So, the relation between IE and ic is IE is equal to ic by alpha
You have studied this in the first year
What is ib?
ib is equal to ic divided by beta
What is ic?
ic is equal to io into e raised to Vbe divided by Vt
This is the collector current of a transistor
In the case of a transistor, the collector current equation is
ic is equal to io e raised to Vbe by Vt
Now, we are adding an input AC signal
These are all DC conditions
We are adding an input AC signal
Let an input signal Vbe is applied to the base
We are adding an input signal Vbe to the base
The equation of the collector current is
total collector current is
Vbe is equal to io into e raised to Vbe
Vbe is the applied voltage
Vbe is the biasing voltage
This is the applied AC signal
The equation of the applied AC signal is
e raised to Vbe plus Vbe divided by Vt
Let us expand this equation
which is equal to
io e raised to Vbe by Vt
into e raised to Vbe divided by Vt
What is this term?
This is the value of ic
The equation of this ic is
The reason for writing small ic is
this collector current is DC
This ic is the collector current after an AC signal is applied
This ic is the ic when the DC is biased
This ic is the new current after an AC signal is applied
We can see both AC and DC in this
Let us see how the equation of this ic changes
io e raised to Vbe by Vt into e raised to Vbe by Vt
io e raised to Vbe by Vt is capital IC
Which is equal to
ic e raised to Vbe by Vt
The expansion of e raised to x is
1 plus x by 1 factorial plus x square by 2 factorial plus etc
We can expand e raised to Vbe by Vt
1 plus Vbe by Vt divided by 1 factorial plus etc
But you have to understand one thing
Vbe is very much less than Vt
Vt is a large value
Vbe is very less than Vt
The square of Vbe is approximately equal to 0
So, we can consider these two terms
We can write the equation ic e raised to Vbe by Vt as
ic into 1 plus Vbe by Vt
If you expand this, you will get
ic plus ic Vbe by Vt
The first term in this is
What is ic?
It is the DC component
It is the collector current at the time of natural biasing
The second term is
ic into Vbe by Vt
It is the signal component of the collector current
We can consider only the signal component
That is, ic is equal to
We can consider only the signal component
We can write it as ic Vbe by Vt
You have to know one equation
What is it?
gm is ic by Vt
What is ic by Vt?
It is gm
We can write this equation as
ic is equal to gm into Vbe
The current source in the small signal model
Instead of the collector current
When we made a voltage controlled current source
Instead of ic, we derived this equation
ic is equal to gm into Vbe
Gm is equal to ic by Vt
These equations are very useful when we solve problems
The equation for the base current
Ib is equal to ic by Vt
We got ic as gm into Vbe
gm into Vbe by Vt
This is the equation for Ib
gm into Vbe by Vt
Now, let's see the small signal input resistance
between base and emitter
We represented it using Rπ
It is the resistance coming from the input of a transistor
I drew a transistor here
This is the transistor
This is the emitter
This is the collector
This is the base
This is the transistor
The input resistance is the voltage given by the input
In common emitter configuration, the input voltage is the base emitter voltage
Input current is the base current
Input voltage is the base emitter voltage
Vbe
Input voltage is the base emitter voltage
Vbe
Input current is Ib
Resistance is the voltage divided by current
Input voltage is Vbe
Input current is Ib
Input resistance is Vbe divided by Ib
which is equal to Vbe divided by
Instead of Ib, we can substitute this value
gm Vbe divided by β
β goes up
Vbe and Vbe get cancelled
We get β by gm
Remember this equation
Rπ is equal to β by gm
Remember this
Rπ is equal to β by gm
If we want, we can change this
gm is equal to ic by ic divided by Vt
We have already written ic by Vt
If we want, we can write it like this
ic by β is equal to Ib
If we want, we can write Vt by Ib
These are the equations for Rπ
Equations for Rπ are
β by gm
Vt by Ib
β Vt by ic
These are the equations for Rπ
There is another equation
If we want to find the emitter current, ie
ie is equal to
ic by α
Instead of ic, we can write
gm into Bp divided by
So this is the equation for ie
This is the equation for ie
In case of problem, if you give the formula for Re
Remember this equation
The relation between Rπ and Re is
Rπ is equal to β plus 1 into Re
Remember this equation
Rπ is equal to β plus 1 into Re
This is the relation between Rπ and Re
We don't have to learn the hybrid model
But in some university exams,
the hybrid model can be used
There is an equation to find the output resistance
That is, Ro is equal to 1 by Hoe
Hoe is the output admittance of a common emitter transistor
Remember this equation
This has nothing to do with the hybrid model
We need to know the equation for Rπ
We need to know the equation for ic
We derived gm into Vbe
We need to know these things
Now I am coming back to what I said earlier
This is the full hybrid pi model
which can be used for high frequency analysis
We said that this hybrid pi model
can be used for low frequency analysis
and high frequency analysis
Now we will simplify this hybrid pi model
so we can use it for low frequency analysis
I told you the Rb resistance is very small
so we can replace it with short circuit
We said that the resistance Rb is a very small value
So we can replace Rb with short circuit
I am replacing Rb with short circuit
I am doing this for low frequency analysis
Rb is replaced by short circuit
Rμ is the resistance between base and collector
It is a very large value
So we can replace it by open circuit
I am replacing Rμ with short circuit
I removed the resistance Rμ
Let's see the next thing
We need to understand another thing
We are using the small signal model for low frequency analysis
We know that the reactance of the capacitor is 1 by 2 pi fc
The reactance of the capacitor is fc
fc is equal to 1 by 2 pi fc
The reactance of the capacitor is maximum for low frequency
The reactance is maximum when the frequency is low
The reactance is maximum means
the resistance offered by the capacitor is maximum
The capacitor acts like an open circuit
Let me tell you one more thing
For low frequency analysis, the reactance of the capacitor is maximum
The reactance is maximum means the capacitor acts like an open circuit
The capacitor acts like an open circuit
So we can remove these capacitors from the circuit
So we removed the capacitor
Let's close this
If we remove all the capacitors, the diagram will look like this
This is the hybrid pi model for low frequency
This is the corresponding hybrid pi model for low frequency
This is the low frequency hybrid pi model
For low frequency and mid frequency analysis
We are replacing transistor by this model
Why are we using the equivalent model?
We cannot apply network theorems directly on the practical device
So we need the equivalent model to use these theorems
To use these theorems, we need the equivalent model to find out its different parameters
To find out its different parameters, we need the equivalent model
Today we learned about the equivalent model, why equivalent model and hybrid pi model
We learned the general diagram of hybrid pi model and its full structure
Then we learned how to redraw it for low frequency
I hope everyone understood this lecture
See you in the next lecture

