VOLTAGE TRANSFER CHARACTERISTICS OF MOSFET AMPLIFIER || KTU || ECT 202 ANALOG CIRCUITS || Module 3
This video lecture contains
1. The transfer characteristics of MOS amplifier
2. Explains the switching of MOSFETs in different regions of operation.
3. Why we choose the saturation region for an amplifier?
For full class
ECT202 ANALOG CIRCUITS:https://youtube.com/playlist?list=PL2UV2EJdMQmhbgPiP-dnVeRNTF0Pcfmpk
#circuits #ktu #ece #electroniccircuit
Hi all, today we are discussing about the voltage transfer characteristics of a MOSFET amplifier.
Voltage transfer characteristics is the most efficient tool to analyze a MOSFET.
Voltage transfer characteristics is simply a plot of output voltage versus input voltage.
In the case of this amplifier, the output is VDS and the input is VGS.
VDS versus VGS is what we are considering here.
VDS on the y-axis and VGS on the x-axis.
The relation between these two is called voltage transfer characteristics.
Now, we are going to explain everything else using this characteristics.
The operation of the MOSFET is dependent on the voltage transfer characteristics.
Let us explain everything using these characteristics.
For VGS, the gate switch voltage, less than VT,
if VGS is less than the threshold voltage of the transistor, the transistor will be off.
In other words, the MOSFET will be operating in the cut-off region.
That is, the transistor will be off.
When the transistor is off, there is no current conduction.
That means the drain current will be zero.
The drain current will be zero only if the current conduction occurs.
The drain current will be zero.
In addition, the output voltage, Vout or VDS, will be VDD.
The first condition is VGS less than VT.
When VGS is less than VT, the transistor is in cut-off.
The transistor will be in cut-off.
In the cut-off region, when the transistor is off, there is no current.
That means the output current will be zero.
The output voltage, when the transistor acts like an open circuit, the voltage will be maximum.
The output voltage will be the supply voltage.
That is, the output voltage will be VDD.
For VGS less than VT, the transistor is cut-off and ID is equal to zero and VDS is equal to VDD.
When VGS is less than VT, the transistor will be in cut-off.
At that time, ID is zero and VDS is VDD.
The transfer carrier is simply a plot that relates the output voltage versus input voltage.
Here, the output voltage is VDS and the input voltage is VGS.
The transfer carrier is the plot between VGS and VDS.
We have discussed the case from zero to VT.
When VGS is greater than VT, the transistor will be turned on.
That means the transistor will be turned on.
What will the transistor conduct?
It will conduct current.
We learned earlier that VDS is equal to VDD minus IDRD.
VDS is the output voltage.
The output voltage will be from the total voltage VDD.
If the drop here is less, the output voltage will be more.
We saw in the last class how this works as a voltage amplifier.
In the first case, the transistor was cut-off.
When VDS is cut-off, the current flow is not happening.
At that time, ID is zero and the output voltage is VDD.
But when VGS is greater than VT, the transistor will be turned on.
As a part of the turn-on, the current flow will be happening.
What will be increasing?
IDRD will be increasing corresponding to the current flow.
What will be decreasing?
VDS will be decreasing.
When VGS is greater than VT, the transistor will be turned on.
What will be decreasing?
VDS will be decreasing.
When the transistor is turned on, the current conduction will be happening.
What will be decreasing corresponding to the current conduction?
VDS will be decreasing.
However, since initially VDS is still high,
initially VDS was a high value.
From there, it is decreasing.
MOSFET will be operating in saturation.
At this time, MOSFET will be operating in saturation.
This continues as VGS is increased until the value of VGS is reached.
As a result, VDS becomes lower than VGS.
This continues in saturation until the value of VDS is less than VGS.
Then, the transistor will continue in saturation region.
When it reaches point B, the value of VGS will be higher than VDS.
At that time, the transistor will operate in triode region.
When VGS is less than VT, the transistor will be turned off.
At that time, VDS will be VDD.
When VGS is greater than VT, the transistor will be turned on.
What will be happening?
Current conduction will be happening.
VDS will be decreasing.
At point A to B, the transistor is operating in saturation region.
The reason why the transistor is operating in saturation region is,
VDS output voltage is greater than VGS.
We have studied this in previous classes.
If VDS is greater than VGS, the transistor will be operating in saturation region.
In this region, the transistor will be operating in saturation region.
When it reaches point B, the value of VDS will be higher than VDS.
When the input voltage is greater than the output voltage,
the transistor will be operating in triode region.
For VGS is greater than VT at point B,
the transistor is operating in triode region and VDS decreases more slowly.
If we look at the region from A to B,
there is a good slope.
The greatest slope in the transfer carrier is A to B.
This region is the saturation region.
The greatest slope in the transfer carrier is in the saturation region.
The drain current at point A to B is the equation for saturation current.
We have studied the equation for saturation current.
ID is equal to 1 by 2 K n dash into W by L into VGS minus VT the whole square.
This is the equation for saturation current in saturation region.
Instead of K n dash into W by L, we have substituted K n.
ID is equal to 1 by 2 K n into VGS minus VT the whole square.
For simplicity, we have neglected the channel length modulation.
The equation for drain source voltage is VDS is equal to VDD minus IDRB.
Instead of ID, we can substitute this value.
VDS is equal to VDD minus ID is equal to 1 by 2 K n into VGS minus VT the whole square into RD.
We can rearrange this.
VDS is equal to VDD into VDD minus 1 by 2 K n RD into VGS minus VT the whole square.
This is the modified area.
This equation is a non-linear relationship.
The relationship between VDS and VGS is a non-linear relationship.
If we want to properly work a transistor as an amplifier,
we have to make this non-linear relationship either linear or almost linear.
To develop a non-linear relationship, we use the technique of biasing.
We will discuss the topic of biasing in the next class.
Keep this in mind.
The greatest slope in the saturation region is in the saturation region.
The maximum slope is in the point A to B.
The drain current there is the drain current in the saturation region.
We know the equation for that.
We have substituted the value of drain current in the equation of drain source voltage.
We will get a relation like this.
If you look at this relation, you will understand that this is a non-linear relationship.
This is a non-linear relationship.
For the purpose of amplification, we have to make this non-linear relationship linear.
The technique we use for that is called biasing.
This is how linear or almost linear amplification can be obtained by using the technique of biasing the MOSFET.
In the next class, we will discuss the topic of biasing.
We have studied the topic of biasing in the case of BJT.
We will discuss the topic of biasing in the case of MOSFET in the next class.
I hope everyone understood today's class.
See you in the next lecture.

