Nâng Cấp XE Wltoys 12428 1/12 Lên 95km/h Siêu Khủng

Kênh Sáng Tạo .COM
4 Người theo dõi
4 Lượt xem video·21 thg 9, 2023
- Hôm nay chúng ta sẽ cùng nâng cấp Chiếc XE Wltoys 12428 tỷ lệ 1/12 Lên 95km/h , chiếc xe này mình đã mở hộp và test ở video trước
- Chiếc xe các bạn có thể mua ở đây: https://goo.gl/Gxatcp
- Để nâng cấp nó chúng ta sẽ cần
+ 1 Bộ TX RX : https://goo.gl/RPvWQh
+ 1 Bộ Motor và ESC: https://goo.gl/L2BRTO
+ 1 Servo : https://goo.gl/VQdHPw
+ và 1 viên pin 3S: https://goo.gl/FgCwxz
Chúc các bạn thành công và có 1 chiếc xe khủng cho mình :D
Welcome to SANGTAO.COM
Today we will test this motorbike
I have been testing this motorbike for half a year
BKF LTOY 12428
The original speed is 50km per hour
This motorbike you just saw in my previous video
This motorbike is new, I just unboxed it
Today I will test this motorbike
Now I will test these 2 motorbikes
This motorbike has a normal speed of 50km per hour
Very fast
Now I will speed it up
To speed it up, I will need this TX and X
A motor and ESC for speed
I use ESC35A
And motor 2838
You can use a 4500kv
Or a 3600kv
This one is faster but weaker
This one is slower but stronger
Maybe I will use a 4500kv
We will need a servo
Because its servo is 5s
When replacing this TX, we will replace it with a servo
And a 3s battery
These 2
This one is 1500mAh
This one is 1300mAh
Still 3s battery
How to use the battery?
It fits here
I will try it here
This one is too big
I probably can't use this one because it's too big
This one fits
So I will use this battery
First, I will remove this motorbike
It has 1 screw here
2, 3, 4
Here, 5
6 screws here
And 2 like this
2 more screws here
This is its controller
We will remove its servo
Keep this one
This servo is a little smaller
I will cut these lines
These things are usually not equal
We have to cut here
Remember to test the servo in the middle
So, we replaced the servo
Now we will replace the motor
I will remove it
I will leave this motor
We take this stand
Now I will put this motor in
This motor
Its hole is different
We will drill 2 holes
I will drill 2 holes here
This one I will cover my eyes
It's not very accurate, but it's pretty good
So
We have installed the motor
Now
I will put back its stand
Now we just have to install it
Now
We just have to install the ESC
I will install the RX here
This place is the ESC
We will plug the motor in
Just plug it in
This ESC, I will plug in channel 2
This servo, I will plug in channel 1
Remember to put the signal in
In RX
The signal will be orange or white
This ESC
I will cut it off
We will plug it in
Its size is the same
So, we have replaced everything
Finally, the battery
I will put it here
Its size is the same
It is extremely strong
I feel that the speed has doubled
This is the original
I will test the color of this wheel
Because I can't guess
I use an RPM meter
Now I will ask my wife to take the gun
Because I don't have enough hands
So
The speed of this wheel
2747 rpm
It can run at 50 km per hour
50 km per hour
Now, I will test my car
I don't know how much this car can run
Its max speed is 4970 rpm
Here
4970 rpm
It is almost double
So, if I keep turning like this
I will reach a speed of 90 km per hour
Now, I will run
I forgot to put this case in
So
We have replaced the ECU
The battery
The servo and the motor
Its speed is almost double
I will put the case in
We will run
So, we have upgraded
I will test the speed of this car
It runs very fast
I am very excited
Now, I will run
3
2
3
I am scared
I am afraid that I can't stand up
I am scared
