Chế Máy Hàn Sắt v2 - 4 Biến Áp Siêu Khỏe

Welcome to CangTao.com Today we will make the V2 version of the iron-welding machine I will use 4 pieces to make the power stronger Now I'm going to cut all the copper wires Keep the 220v copper wire Wait for the eye to be cut When cutting, do not cut this wire To protect the 220v copper wire When cutting, do not cut this wire I have finished cutting Remember to cut cleanly like this Remove all things After cutting, you will have to measure 3-4 ohms is fine It will not be broken This is 3 ohms 3 ohms All 3 ohms are fine Now we will wrap it The V2 version I use a bigger wire The diameter of the copper wire is 7.0mm The diameter of the copper wire is 4.5mm Very big Now I will wrap it You wrap one way Follow the clock The longest step is to wrap like this I will not film this part After wrapping, I will film later So I wrapped it I wrapped 8 rounds 4 pieces of copper wire is 32 rounds 1 2 3 4 2 times Follow the clock 4 pieces of copper wire 2 pieces of copper wire 2 meters Remember to put the power supply in one direction I missed this So 32 rounds 0.7mm 4.5mm Next, you will connect all the power supplies together 220v Next, you will connect all the power supplies together 1 2 3 4 Now I will try the 3.2mm thick steel wire If the wire is strong, it will be able to cut the thick V5 steel wire Strong enough to cut the thick V5 steel wire Let's try the 3.2mm thick steel wire The thickness of the steel wire is 10mm This is a 17mm steel wire The wire is very thin I am testing the wire to see if it is strong enough to cut the thick V5 steel wire So that's it The 4mm thick steel wire is extremely strong The 3.2mm thick steel wire is strong enough Thank you for watching Good luck