Aprende cómo hacer posavasos con tus animes favoritos (en casa), resistentes, duraderos y brillantes. Estos posavasos caseros están hechos con resina epoxi, con el que conseguiremos este resultado cristalino tan bonito.
artemaster, dibujos artemaster, como dibujar, arte master, dibujos, dibujos faciles, dibujos realistas, dibujos, posavasos, posabasos, posavaso casero
Welcome to the Artemaster channel!
Today I bring you a video that you are going to like a lot
because it is about making homemade cup holders
but good and resistant homemade cup holders
and also, look how they shine!
Although it seems like a lie, they are totally handmade
and today we are going to see how to make them
because yes, obviously I know that you also want your own Sharingan cup holders
Having said that, I hope you like it and let's go with the tutorial!
Very well, let's go with it and the first thing we need are
this kind of silicone molds
I have bought them on Amazon, I will leave you the link in case you also want them
but the thing is that you can use any silicone mold and also in any way
Do you see how the mold shines inside?
That is important so that later the resin is not opaque
This is the epoxy resin that we are going to use to make these cup holders
I also got this epoxy resin on Amazon and it is A and B component
As you can see, there they put the mixing instructions
which are 100 grams of component A by 60 grams of component B
and this is measured in weight
and the complete catalyzation or drying is 24 hours
To manipulate the resin, I recommend that you wear gloves
since, well, they are toxic products
and as in the case of this resin they are 100 grams of component A by 60 grams of component B
we are going to do exactly that mixture
The instructions for the resin you buy, you have to read them and understand them very well
because if not, the resin is likely not to fit you well
because depending on the brand, the proportions are very likely to be different
Something important is to first apply component A and then on top of component B
For this, as you can see, we are using a normal and ordinary plastic glass
and a wooden pallet to stir the mixture
Just after putting component A and component B
we will mix for 3 uninterrupted minutes
It is very important that it is stirred for 3 minutes uninterruptedly
because if not, the mixture will not be well mixed
In fact, you will notice that after stirring a lot
the density even changes and becomes more transparent
What I am going to do next, and this is because I have made a lot of resin
is to divide this mixture into another glass
This is because if there is a lot of resin, it heats up very quickly
because it makes the reaction of component A and B
and this would be a problem
So dividing it into two glasses, we avoid that overheating
At this time, after stirring for 3 minutes
we will let it rest for another 3 minutes
While we wait for the 3 minutes to rest, we will place the molds
Check very well that the molds are completely clean
because if you apply the resin and there are some lumps of dust or something like that
then they will also stay there
Then, after having rested the 3 minutes
you can apply without fear inside the molds
and we are going to make a fairly thin layer of 1mm or 1.5mm
I recommend you apply it little by little
and then the resin itself will expand very slowly
and in case the resin does not move at all
you can help it move with the wooden spatula
But in the beginning, the resin little by little should expand by itself
and it is very important that you do not touch the edges
because if you touch the edges with the wooden spatula
it is likely that you will mess it up a bit and the result will not be good
You have to let the resin expand by itself
and reach the edges by itself
because if you force the resin, you will create some waves
and then, once it dries, it will stay that way
and well, that is a bit difficult to explain
but it is better to let it expand by itself
and if you have to help it expand, do it from the middle
The fire that I am putting over it like this, quickly
with a lighter and also with a blowtorch
is to avoid the bubbles
You will see that passing small flames, the bubbles disappear
but you have to pass the fire very quickly
At this point, we will let it dry in an area without humidity
At the moment, you can print the drawings you want to make in the cup holders
These drawings have to be printed in the size that the cup holders will have
since obviously, as the cup holders will be transparent, we will use them as a guide
After waiting from 16 to 24 hours, we can unmold here
and we have like a kind of magnifying glass
They have cured all the molds correctly
and this is the shape in which it has to be
totally crystalline and resistant
So now, with these cup holders, we are going to put them on top of our guide
and with a little bit of moldable rubber in my case
although it can also be plasticine or anything that leaves it fixed
we will press a little and so our cup holder will not move at all
The time has come to make our drawing
and for this, what I recommend the most
is that you use acrylic markers
I'm going to use Posca markers
and these finite black markers for the outline
The trick to make the painting with the Posca markers
look very good when coloring on top of the resin
is that you stick like this with force
which is created as that kind of puddle that leaves a lot of ink
since if you do not do it that way, with the tip well loaded
you will have transparencies and the effect will not be so good
It is likely that you can also use sharpies
or even acrylic paint with brushes
but these techniques are going to be much more complicated
since unlike using Posca
if you use sharpies or acrylic paint with brushes
you will have some transparencies
and well, the effect will not look so good
In fact, it is likely that if you try to use alcohol-based markers or sharpies
then when we put the second layer of resin on top
there is a probability that the products among them
do not get along well and the ink and colors run out
so I recommend the Posca or acrylic markers
that I can assure you that it works
On the bottom it will look quite ugly
but on the part that we have painted it will look very nice
I'm also going to try to make some cup holders
with this square model
As you can see, I have chosen some designs
that are quite funny related to food and soft drinks
since as cup holders are used when we are doing the action of eating or drinking something
I have believed that they would be quite funny
choosing that type of design
although in your particular case you can put there whatever you want
In fact, I think that this type of craft is a quite interesting gift
since you can customize it with any type of thing
and as you will see at the end of the video
you will realize that they are really resistant homemade cup holders
The only real drawback that we would have when making these cup holders
is that almost 100% you will have to use acrylic markers
if you want a good result
but well, I think that today many people have them
After finishing the coloring it is likely that there will be some transparencies
like here in the hair
I put it against the light so it will look perfectly
and it just rectifies those gaps that have remained with transparencies
And I want to comment on something that you are probably thinking
if you have never used epoxy resin
and you will be thinking that it is quite complicated to use it
and it is that at the beginning I had exactly that thought just like you
but then after trying it and doing some tests
you realize that it is not so difficult
If you follow the steps that I have taught you in this video
believe me that it will come out well
By the way, when you are coloring with the epoxy resin
think that you have to let the previous color dry
before applying the next one
because if not, they will mix with each other
We already have all the designs completed
It has taken me a little while because I have done a lot
but depending on the difficulty of the drawing
it will take you between half an hour to an hour to do each one of them
At this point, before continuing with the next procedure
you will have to clean a little with a stick for ears and alcohol
only the exteriors of the drawing
where we have left the transparent parts
since during the drawing process
with your pringos fingers you will have stained everything
so we will give it a clean
Now we fit the cup holder
preferably in the same exact position that we take it out
and of course also in the same mold
since in that way we will avoid much more
that the resin can be poured from the bottom
that is, you have to fit it as best as possible
pressing down
to avoid, as far as possible, that now
when putting the second layer of resin
it sticks a little below, as I say
and this spoils the crystalline effect
so make sure it is well fixed
Here I am doing the same as before
exactly the same mixture with the same quantities
We mix for 3 minutes
then we let the other 3 stand
and we can give this second layer of resin
This is going to be the one that is going to seal
it will protect and it will give
that crystalline touch so beautiful
The thickness of this layer will be the same
as the layer we made at the beginning of everything
from 1mm to 1.5mm
that already depends on how chubby or thin
you want them to stay
We will apply the resin doing the same technique
that expands little by little
and in fact also if you see that it does not expand correctly
you can also use the technique
to raise the cup holder a little
and let it dry
Do that carefully, we just want it to expand well
We remove the bubbles again with a blowtorch
If we see that there is a bubble
that is at the bottom of the resin
we can raise it with the wooden spatula
and give it again with the blowtorch
And at this point we have them finished
but the most important thing is missing
and it is to let them dry well again
For this we will wait again
between 16 and 24 hours
for it to cure perfectly
By the way, the ambient temperature for epoxy resin
if it cures very well
is between 20 and 25 degrees ambient
and that there is very little humidity
If there is humidity, it may be that in some areas
of the resin it is opaque
and it does not look so transparent
But if you follow all these steps correctly
you will have results similar to these
You could also add to the resin
a drop of blue ink for example
so that instead of being transparent
it is also equal to crystalline
but with a bluish touch
and of course it would also have a very curious effect
All that I leave it to your own creativity
Here we are already unmolding
all our cup holders
that I am going to keep with a lot of love
I really didn't expect
such professional results
They look like factory made
and really very shiny
I love Goku, Naruto and Sharingan
But tell me, which of all those
is the one you like the most?
Here you can also appreciate
that double-layer resin effect
that gives it a super spectacular effect
and that drawing will always remain
without any kind of scratch
At most the resin will scratch
but this one is equally super resistant
and I'm going to show you
I'm going to drop this cup holder
repeatedly mistreating it and scratching it
with the glass
The epoxy resin
is much more resistant than you can
believe at a time
and once dry you can pour any liquid
over it that will not happen to it
absolutely nothing
The scratch of objects on top
also holds them very well
as you can see here
After removing the water or any dirt
that the drinks have left
you will see that it is intact as new
and it is that also as I was telling you
the epoxy resin supports the scratches very well
here with the Coca-Cola can
I am passing it by force over
much stronger than I would do in normal situations
And yes, our homemade cup holder
again resists attacks
It is completely new
That's all friends
Thank you very much for watching this video
I hope you liked it, if you have any questions
ask it in the comments
Always keep drawing
and see you very soon in the next video