Tutorial de dibujo del nuevo anime Chainsaw man o "pibe de la motosierra". Volvemos con un tutorial paso a paso donde podrás dibujar a Denji con las motosierras de pochita :)
Para este dibujo utilizaremos Marcadores base alcohol y lápices de colores!
artemaster, dibujos artemaster, como dibujar, arte master, dibujos, dibujos faciles, dibujos realistas, dibujos, chainsaw man, denji, chainsaw, chainsaw temp 2
First of all I want to congratulate the new year, I hope to upload a lot of videos this year
And today we're back to draw a new character from a new series that's asking for it, the
Character is called Chainsaw Man, so I hope you like it a lot, ya hacía falta
A tutorial like this and without more, inside video.
So let's start drawing and the first thing we'll do with a rule is draw a line
Vertical in the center.
Now we place the rule of diagonal shape and make a line alone on the left side,
at this moment we will sketch a square on the right side that will be to situate
The head.
For all these initial guides try not to squeeze too much with the pencil because more
We'll borrow it later.
Finally I make these little lines to position too the torso y listo, with this
We can start, so we're going to go directly to the square and we'll start
There's a kind of peak, which has three points on the right side and
There below in the bottom part of the square we're going to make this other peak more finite.
Now that these peaks are part of Changsaoman's head we'll connect them with these cables.
Also we have here two little curved lines and then in the whole rest of the square
We're going to be drawing there on that whole right-hand side.
We'll start with the whole mechanism of the chainsaw, and I'll start drawing this whole thing.
It's a little tricky to explain this so that if you're going to use a chain saw, you can use a chain saw.
You want to draw it at home you better slow down the video.
And once we've done all those interior details, we 'll also have the wing upstairs.
It has this triangular shape, let's make also there a couple of circles
I'm also part of the mechanism, really this is the most difficult and tricky part of
Take it easy, we'll have six rectangles.
With practically all the details of the mechanism ready we'll do it too here
A couple more cables and we 'll make here the double of the shirt collar to power
Then continue with the whole series of cables that hold Changsaoman's head.
There are many very finite cables and it's quite difficult to explain this but good in reality
It's pretty simple. I'm just doing it here.
Yes, yes, yes, we've finished this part. We can go back to Los Picos.
The first thing we do is to make sure that all the space we have left is for the whole
The multitude of teeth that this new impressive character has, the chainsaws.
I'm pretty scared, but my mother, look at those teeth. I wouldn 't want her to bite me.
And first we make this whole series of sharp teeth both the top part
Like the one below and then between those teeth we make others that will be we say the ones of the
Now let's go to what we could say the helmet and do these
Four stripes in the back, and then later we 'll have the eye.
They all curve a little bit and they get smaller as they go to the right.
We make a couple of lines there the blood marks and we just add then now
A couple more cables from the new part and we've finally got more.
Now with the help of the rule we'll make the Sierra the diagonal line that we did
A simple start is to be able to center the mountain well then we make the two lines
parallels leaving exactly the same anchor distance at the end effectively a hand
Alzada let's make the curve now that we have all the shape of the chainsaw we can
Doing all this series of pinchos that are going to go all over the edge of this is very
The boss is a pincho a little bigger another a little smaller and
So all the way until you finish in this case the sheet is quite panoramic indeed
For the motorcycle saw that is very large and takes up a lot of space then now that we have
We can make all the blood stains there.
The traps of the demons that have carried the blood stains the good
It's that if you don 't stay exactly the same way nothing will happen nothing will be noticed
Nobody will come to tell you that the blood stain has deformed you.
You can do a little freestyle but good that is in the tip of the chainsaw in the
Those pinchos we're gonna make some blood dripping at this point and only we're left
The torso so with the guidelines of the beginning let's fit everything by there let's start
With the collar of the shirt to be able to then continue drawing the first
Part of the tie and continue doing everything around the shoulders and the shirt.
General remember to make quite a few folds on the shirt that will give it a more appearance
We make these lines in the center with the buttons to separate the shirt by
The middle and we continue now doing the rest of the tie then now that we have
When the tie is done, we 'll also have some bloodstains that we 'll color later.
And finally we return a moment to the chainsaw that if I had forgotten to do all these
Details that nothing are a few simple lines here and ready because now yes is what we have
Finally finished the sketch and it's time to delineate the same way to delineate the chainsaw
We'll use the rule and well in this case I'll be using delineators since
I'm really going to be using delineators quite a bit.
Finite in almost every part of the drawing since certainly this character can yes
It's pretty detailed. I have to say the animation is brutal.
With patience and good writing we will go reignando all that immense amount of details that
I'd like to hear from you in the comments if you've got it.
I saw the show and what you guys thought of me the truth is that I think it's pretty interesting
But once we have the list outlined we'll delete everything including the guidelines.
Starting and directly we start coloring in this case I'm going to use markers a base
I'll start giving a very very clear grayish tone to the whole part of the chainsaw.
Unless obviously in the parts where there will be blood for the borders I will use another
Gray tone but as you can see a little darker and all the parts I'm leaving blank
That's because there will be blood then now with gray also we fill all those pinchos
For now, we 'll continue to fill in all the areas we left blank with color.
I'm going to use a tone like this more colored wine and pork.
The middle and right side of the chainsaw I'm going to use a red tone a little more vivid
And to make it more proficient you can combine the reds between them so that you make a
I mixed everything up there to make it look impressive and of course we didn 't forget the drops.
We 'll also have some blood with a grey marker.
The metallic gray color to begin with gives a little texture to the whole part of the
The whole chainsaw will be making more pressure in some parts and less in others.
I'm going to use a dark grey pencil to
Some parts where you need a little more shade and also at the same time
We 'll be highlighting all those rasguños we've done before with the color gray.
The help of a white pencil and also using the post also with a pencil
Dark gray can give a little more texture to some parts of the chainsaw or even
We'll just get a little more blood and let's leave the chainsaw totally detailed.
I wanted to give you a lot of detail and texture like you see in the anime which is spectacular.
And we start coloring with orange and yellow and make mixtures but by the area where you go
I'll make it clearer with yellow tones. I'll start to darken.
With a black color all that area of the stripes leaving with care the shape and the eye
Finally, so that it looks like it's shining, I'm going to use a
I'm gonna have to erase those lines from the delineator.
We can keep filling up that whole area of the mouth just like the stripe.
Below with a little black and gray and all this part of the helmet that we had left
En blanco is to fill it effectively también de sangre y pues with the same tones
Before we fill this part of the chin as well as the other part
Below with black and gray in the teeth, the shadows on that side of the top, and also
As I mentioned before, we use a normal gray.
I'd also use a very very clear gray that's hardly noticeable but to give it a little bit
We're going to use it now for the whole piece.
The mechanism is a black color, another grayish color, quite dark, and a final tone.
A little lighter but what good in reality still being dark too I know
It's not appreciated too much because it's all pretty dark but it's okay nothing you could
Fill it perfectly with a dark gray and then later we'll give you details
But basically we're going to be filling all these mechanisms.
I'll give you a little shade. If you don't mind, I'll tell you.
I thought it would be very good to do.
These rayitas are made by you if you have the doubt in general plans of the own anime if you sell it like this
Well I'm gonna be using red and brown tones to make everything the cable
I don't know why, but it was pretty satisfying filling those cables up for some reason.
Strange reason and good because now that we've painted all those cables all the area that goes
I'm going to paint it black or gray very very dark.
Be very careful because if we don 't get the wires in, it 'll be a little weird.
You see, once we give him the black contrast behind it, it's pretty epic and good for the whole shirt.
That left side there we're gonna start filling with a blue-grey and also we're gonna go
I'm going to point out some of the shadows that have the folds and so on.
Apply a gray base quite clear the same as in the chainsaw and now yes I will continue
I can make all the marks and folds necessary for the shirt. You see what the tone is.
Blue and another a little lighter so we'll continue shading all these folds with
The blue grayish tone and now also using a navy blue tone let's make some shadows
A little darker let's fill this little area here with a little black and colored skin
And with a dark gray and a green musk we will go filling up the whole la corbata remember that all
The list of materials is in the description if you want to investigate or buy any
I'll leave you links to my social networks where I'd love to see you.
You keep going because that's where I always go publishing advances and pretty juicy things actually me
He updated and also I have Tiktok in case you didn't know and well here we are already finishing
Detail the tie as you see in reality it is quite dark has some tones here with green
But if you don 't want to complicate your life too you can fill it all with dark gray and white
And now with the white pencil and a pen gel white ink too we're going to give a
There's a little bit of texture all over the mechanism. There's the chainsaw.
I'm starting to see all the details. I'm really fixated on what a little lighting does.
We're almost done. We're gonna make the blood stains on the shirt here too.
I'm going to use a lighter red because it's giving the light and friends and friends like that
As we finally finish our drawing which has quite a bit of detail he enjoyed drawing a lot
I hope you enjoyed the process and that you too
You can do it at your house and this is how our drawing would look totally finished.
Thank you so much for watching till the end. You know you can leave a comment.
I'm sure you're not subscribed or subscribed, but we'll see you there.
With open arms in this incredible community of drawing and now you keep drawing and drawing
We'll see you very soon in the next video.