【初心者必見】枝の残し方！文人調真柏の剪定と針金かけ【盆栽Q】

Today, I'm going to do a cutting of a branch and a cutting of a wire. The other day, I did a cutting of a branch for 10,000 yen. That's right. It's not dead at all. I'm going to cut a branch and cut a wire. Happy New Year, Mr. Hiroma. Thank you very much. I'm going to cut a wire for the New Year. Thank you. First of all, it's this season. I want to reduce the number of branches because it's a thin tree. In March and April, when the growth period comes, the number of branches will increase and I will get fat. I told you before, but this tree was about one-third of the tree. That's because there were so many branches that I got fat. So I'm going to remove the branches. I think it's safer to remove the cedar leaves at this time of year. Some people say that cutting cedar leaves will weaken or rejuvenate the tree. However, if you cut cedar leaves, you will get fat. So you should cut the cedar leaves while the tree is still in hibernation. I think it's a good time to cut the cedar leaves. I'm actually worried about this. I'm going to use this as a branch and cut it like this. It's a gentle cut. And I'm going to turn this over and cut it hard. Because it's in hibernation, there are times when I cut it off. For the time being, I'm going to cut the cedar leaves, the back branches, and the top branches. I'm going to make it gentle here. I'm going to cut some of the necessary branches. I heard that there are three branches. I need this as a branch. I'm going to make a knot. This is one. And I need the second back branch. There is one branch. This is the back branch. I have this. This is the back branch. I'm going to cut the rest of the branches. I'm afraid to cut it from the back. This is a branch. I'm going to take this branch out to make use of it. This is the most important branch. It's right next to the branch. This branch won't come alive. I'm going to take this branch out to make use of it. This is the back branch. There are two branches here. I'm going to take this branch out. There is a branch on the back of this branch. The back of this branch overlaps. There is a branch on the back of this branch. I'm going to take this branch out. I need another back branch. I'm going to take this branch out. This branch is close to this branch. There is a branch on the back of this branch. I'm going to take this branch out to make use of it. I think this is the end. In the first place, I don't know if it's a good idea to cut this branch first. I see. If there are a lot of leaves, it will absorb a lot of water and act vigorously. So, it is better to reduce the number of branches as much as possible. On the contrary, if you want to make it thicker, it is easier to leave the branches. You mean, it's easier to make it thicker if you leave the branches. In the case of Kuromatsu, it is often used to make thick trees. It is often used to make thick trees by running the core of the tree and making it thicker. In the case of Bunjin, it is better to reduce the number of branches as much as possible. And, it is better to make thin branches. Yes, it is. The problem is that you can't decide which branch to take out. Accordingly, lead combs are also taken out. These combs are used to make the ásset like the ásset on a bottom. So, the name of the branches are arranged to draw a personality. That's it for this part. In addition, these combs were left in the same place many times. So, I pull out the sweet road branch and arrange it once more. It is like this. You take very small branches. These are the small branches. This is the most important one. You said you only need 3 branches. Yes, I did. The branches in the front, the back, and the head. The head. It's the ultimate. When you select the branches, you have to be conscious of which one will be in the back. That's right. The most important one is the two branches in the back. The branch in the front and the branch in the back. You have to decide which one will be in the back. That's right. You can make any shape you want. I see. You can make any shape you want. It's a little bent. So I'm going to raise it a little. I'm going to make it like this. I'm going to use a wire. Is it too much? I said I only need 3 branches. I thought I had to pull it a little more. This is a little strong. Let's pull this out. It doesn't have to be straight. You can make it slanted. Let's pull this out, too. Then you have two branches. Make sure it's in the back. Inside or outside. Make a nice head. This is a little too much, but it may be stuck. So that's what we're going to do. I want to twist it like this. I want to twist it like this, so the wire goes under here, and I twist it this way. Theoretically, I want to hold it down, so it goes up. But I want to twist it, so it goes down. My hand won't move. It's New Year's. You didn't do New Year's at home, did you? No, I didn't. I can't do it at all. Do you have a kotatsu? I don't have a kotatsu. It's cold at home, so I don't feel like sleeping. I can't do it. Even if I don't bend it, I put it on my back. That's the basic. I put it on my back. Where did you put it now? I put it on the bottom branch and the top branch. I put it on the bottom branch and the top branch. From there? Yes. I put it here because it's too far. If I put it back here, it will be pulled here. If I put it back here, it will be pulled here. I'm going to make it like this this time. I want to make it a little higher today. I see. So I'm going to put a thick wire on it. I see. And then I'm going to turn it over like this. Yes. Like this. It doesn't matter which one, but I'll put it on this one. So that it doesn't wrap around the leaves. It looks like it's going to break. Right? It's really frozen, so the core of the branch may still be frozen. The rest of them are about No. 20 and No. 22. Yes. This is No. 20. No. 20. Yes. This is my favorite pair of scissors. You're introducing your goods again. I'm introducing my goods. I have a lot of scissors. What was it before? I think it was a wire cutter. Was it a wire cutter? I have a lot of similar scissors. You have a lot of scissors. I have a lot of them, but I don't use them. I'll use this one. This is a wire cutter. It's a wire cutter that cuts the root when you turn it over. It's made of stainless steel, and it cuts gravel and other things at the same time. It's not very expensive, but it's durable. I haven't used it much lately, and this is also made of stainless steel. I see. The one I usually use the most is this one. There are three Masakuni around here. Yes. This and this are the same. This is the one I use the most with normal scissors. Yes. This is a wire cutter. I use it to cut the root of a tree, and I also use it to cut leaves. I see. This is very easy to use. Why do you use this and this in the same way? I bought it because I wanted it. I just bought it because I wanted it. Both are good. The one that cuts leaves. It's like a collector. This is the one I use the most. This is a wire cutter. I've been wanting it for a long time, and I finally found it. I haven't made it anymore. This is a wire cutter. The purpose is different. That's right. These two are the same. I see. Yes. Especially. Yes. There is nothing more than that. I use number 20. There are also numbers. That's right. The more the number, the thinner it is. This is number 20 and this is number 22. What about aluminum wire? It says here. That's right. It says here. That's right. Thank you for your advice. The thicker it is, the thinner it is. It says here. Number 22 is 0. Number 22 is 0.1? 0.7. It was unforgivable for us to enter. It was unforgivable. It was really unforgivable. I was laughing at the aluminum wire. You were angry. You were angry at the aluminum wire. However, thick ones are often used for aluminum wire. That's right. Mr. Adachi was doing a lot of thinning the other day. I think he couldn't do it because he was doing it with the same wire. Aluminum wire is fine. I see. The pitch is fine. Originally, it would be cooler if the wire was thicker. However, the thinner the wire, the easier it is to make fine poles. I see. That's why I used the same wire. Aluminum wire is easy to bend. If it's thick, it'll break. So, it's easier to make fine poles with aluminum wire. Do you use different kinds of wood for aluminum wire and thinning? Yes. I see. I never use thinning for thinning. I see. I never use thinning for thinning. I use the same wire for thinning. However, when I do thinning, I use aluminum wire. I see. Recently, many people in Omiya have started using thinning wire. I see. Do beginners use different kinds of wood for thinning? Aluminum wire is easier to make fine poles. Especially, women don't have much strength. I see. Aluminum wire is better. I only have aluminum wire. Aluminum wire is fine. You don't have to stick to it. You can make fine poles without a big pole. Right. I see. There are fewer people who can use thinning wire. Aluminum wire is used for thinning. I see. Aluminum wire is used for thinning. Aluminum wire is thicker. So, there are fewer holes. Aluminum wire is used for thinning. What is this? This is a paper tape. A paper tape. You can buy it at a 100-yen shop. It's small. I want to make fine poles closer to the trunk. I see. I want to make fine poles closer to the trunk. I see. I want to make fine poles closer to the trunk. You need putting board on it for finding poles. To find following poles I need to take this board off. I see. It's okay to make it out of board instantly. But, for making them round, I should make all sharp edges. I should trim the tip of corner. I should take this off. You can see the tip of the leaf is sticking out. You can do the same thing as you do at a barber shop. You cut the tip of the leaf. When you do it like that, the tip of the leaf will stick out. You pinch the tip of the leaf with your finger. The leaves of Shinpaku are V-shaped. It's a leaf with a lot of veins. It's like pulling the tip of the leaf out. People often tell me to cut the tip of the leaf. I thought this branch was long, so I tried to cut it. If you cut it like this, you'll cut the leaf in front of you. Then the tip of the leaf will burn. For example, if you want to cut a long leaf, you put the scissors diagonally like this. If you put the scissors diagonally like this, you'll cut the leaf in front of you. So you put the scissors diagonally like this. Then you cut only the shaft. You never cut this leaf. This is an important way of cutting. When you do it by hand, it's normal. When you do it by hand, it's like a V-shape. You pull the tip of the leaf. People often tell me not to pull the tip of the leaf with my nails, but to pull the tip of the leaf with my fingers. If you do it like this, the tip of the leaf will have a lot of veins. If you do it like this, the tip of the leaf will burn. You pull the tip of the leaf with your fingers. Then the V-shape will remain. It's hard to hurt the tip of the leaf. That's right. You don't want to hurt the tip of the leaf. This is just to shape the leaf. I think it's to keep the leaf from stretching. That's right. It's to keep the leaf from stretching. The grass is frozen. It's frozen. This is really interesting. I don't need this. This is a single-leaf grass. I don't know. If there was a little leaf on this, it would be a big leaf. It's amazing. This is important. I have to cut this. There is a simple meal. This is a single-leaf grass. It's like this. It's a fun game. I want to play at home. It's better to have this than to play this alone. That's right. It's better to keep the balance. There are a lot of things here. When we decorate like this, There are things to decorate other than fashion stores. I wonder if there are people who do this at home. If there are people who do this at home, they say that they feel like drinking tea while drinking alcohol on New Year's Day. After all, the ice is working. It's falling down. That's right. So, in order to make use of it, if you take this, it will come to life more and more. What should I do with these two? I see. I'm sorry I didn't put a fine wire on it at all. After this, I'll remove the wire. That's right. I'll replace it again. It's like replacing it. That's right. I'm using this to match the angle now. I see. This is also a big bowl. I see. I have to make it smaller. Just make the bowl smaller, reduce the number of branches, and don't make it fat. After that, I'm going to twist the leather. It would be interesting if the water came out. Do you paint it with a solvent and make it white? Don't you do this? You can do it, but I think it's better to peel it off completely. Then, I'll do it earlier. It's a little... It's too strong. This is... It's winter now. It's a short grass. I don't know what it is. I'm sorry. I should have brushed it with a toothbrush. I think the atmosphere will be transmitted. Don't make the atmosphere too strong. That's all. Thank you very much.