【五葉松】素材から作る！続・針金掛けの教科書【盆栽Q】

🎵 Sensei! First of all, I will decide the front of this tree. If you look at it normally, is it this way? Yes, it's this way. This is called a taiko drum. This is the front and this is the back. This tree has three legs, so one of them is in front. This is in the middle. I'll take a look at this. It takes a lot of time to make this five-leaf clover. So I'll ask the teacher to remove the branches and roughen them. I'll do the rest of the details. If I leave everything to you, it will take a day. Will it take longer? This is my practice. You can also change the angle. I think it's okay to lower it a little. This is because it's parallel to the ground. I'll lower it. Do you also change the top? It's still okay. Let's do it. Do you want to do it? I'll change the top after I finish all the wire. Do you change the top after you put the wire on it? Yes. It takes a lot of time to make one video. It takes a lot of time. I understand. It may be divided into the front and the back. Are the roots also withered? The roots are beautiful. The roots are up here. I'll take a little. It's a good stickiness. That's right. It's cool. Everyone was hiding it here. It's cool. It's a good stickiness, isn't it? It's good. I want to show you a little. I want to show you the roots. It's a good stickiness. Everyone is hiding it. I'll shift the front a little. This is the front. I'll put the front here. I'll pull out the branches a little with this. Okay. This is the first branch. This is the back. This is the back branch. This is the whole head. I'll make it like that. I don't think there's much to paint. I'll just take the extra branches. This is a little too close. There are three here. I'll take this. This is a little out of the outline. This is it. It's sticking out of the outline. I'll cut it like this. When it comes to pine trees, There's a little branch here. There is a possibility that this can also be used. This is to make it thicker. If you bring it up a little, The thickness of the shelf will come out. If you need it, you can leave it. If you don't need it, you can take it out. If you don't need it, you can cut it off. If you want to make the shelf thicker, This branch is a necessary branch. Basically, the upper and lower ear branches and the ones that came out of the outline. First of all, you don't need a branch that goes down. And how to pull out the branches that go up. If you want to make it thicker, You can leave the branches that go up. This branch is in the way right now. If this is gone, you can see the back branches clearly. Then the shelf of this branch will be decided. I don't know what to do later. I don't know if I'll leave it or not. This is an important role in determining the direction of this tree. This is a branch branch. I'll leave this as it is for a long time. There are three of them, so I'll go with this one. Isn't there much energy in this tree? The leaves are a little soft. I don't think there's enough fertilizer. This is a little dirty. Like this. You can see the bones. I don't know if it's going to fall. I'll take this. I'll put this back. Do you want to put it on the right? I'll put it on this side. I'll put it on the right. I'll put it on the other side. It's interesting. I see. I'll put it all the way to the back. Then I think I can make a shelf here. I see. I don't know what it's going to be like in the end. I'll put a wire on it. Aluminum wire will make the wire muddy. I'll put a copper wire on it. Basically, you can do it with copper wire. There are a lot of branches, so it's difficult. I'll put a wire on it first. It's too close to the back. It's coming out soon, so I'll take it. I can't put a wire on it. There are three wires. There's a wire here. I don't know which one to put the next wire on. I don't need this wire. It's going to stick like this. If there are three of these, Even if you start from here, The wires overlap and get in again. I'm going to pull one out here. By pulling it out, this will move closer. The wire will go in smoothly. If you put the original wire in, There's a branch like this. If you don't bring it all the way to the end, The next wire won't go in. If you cut it here, It's going to start from here. Then the wire will be gone. I'll bring it all the way to the end of the branch. Then all three of them will be hidden. If you cut it here, This is the worst. Make sure you bring it all the way to the end of the branch. You can see it here. You can see the branch here. You're going to start from here, right? Yes. If you cut it here, If you cut it here, the wire won't go in. Make sure you bring it all the way to the end of the branch. It's going to start from here, right? That's right. This wire is in front of the branch. If you don't put this in front of you, The branch will fly away. You have to put it in front of you. If you put it in first, you have to put it in first. That's why I'm going to bring the wire all the way to the end of the branch. If the wire goes in front of you, I'll put this in front of me, too. Then the next wire will go in smoothly. Oh, I see. For example, if you go here, it goes in like this, right? This goes in, and this is the starting wire. Like this. And then this comes here. It's going to come this way. It's going to go in either way. I don't know. I can't see it. I think it's better to come this way. Like this. And this branch is going to be left over. You can stop here halfway. Or you can take another wire out of here and put it in here. This one. This one's open. This one's going to come in, and this one's going to come in. And this one's going to come this way. There's a wire in front of you. This one. It's in front of you. Make sure you cut it again. There's a wire in front of this branch. The first wire. And this one's going to come in like this. And this is the next wire. Yes, yes. Even if you cut it like this, it's going to come in front of you, and it's going to come in naturally. This one. The way this first wire goes in is very important. If you put it in front of the branch, you put it in front of the next one. If you put the wire in front of the branch, you put it in front of the next one. It's a little easier to understand here, so I'm going to draw a thin one with a sample. It's okay if it's number 22 or 20. You have to put it in front of this branch. In front of the branch. Do I have to wake up? I'm going to draw number 22. Do I have to draw another one? Yes, another one. I wonder if I can do it. I'm going to put this in here. It's going to go in as it is. You don't have to take it out of here. You can put it in here, but I'm going to put it in from here. You can't overlap the wire. I'm going to wake you up with this. Align the bottom properly. Like this. Bring it up by 45 degrees. Oh, this is going to come up, too. You have to come right above it to wake up. I see. I'm going to half-spin this and pull up this wire. It's going to wake up naturally. I see. I'm going to spin it again. If I spin it again, I'll tighten my neck, so I have to stop it in the middle. This is going to go in here. I'm going to make a shelf like this. In order, this is the back branch. This is going to go up the most. The height. This is the bottom. This is the second one. This is the order. I'm going to tighten this again. About 30 degrees. Did you hang it here and here at first? Yes. Did you hang it here and here halfway? First, I hung this one. It came this way. This wire came this way and went into this branch. Did it go into this? Yes. This and this? Yes, this and this. And the wire that started from this short one came this way. Oh, so number 20 is hanging here and here. Yes, yes, yes. There are two of them. I see. And the fine ones are here. There are one number 20 and one number 22. I see. This one and this one. Yes. And this one and this one. Yes, this one and this one. And one here and one here. Yes. This one and this one. I see. Can you do this? I understand. You just have to stack them up. Yes. Up to three wires. Up to three. Yes. So that it doesn't become a cross. Yes. This is how you put it in. Here. Like this. Yes, yes, yes. This is definitely not good. If the wire goes in between here, it won't close to the outline. So you can't do it like this. I see. You have to hang it from the outside. It will get caught here. It's about how you choose the thickness. The thickness is about one-third of the thickness of the fin. It starts from the top of this original shaft. Yes, yes, yes. So you use this frame to hang it. Yes. This thick wire is number 12. This one goes up to here. Up to here. The next number 20 goes in with this wire. I see. This one, this branch, and this branch go in. Next, this branch and this one cross. Yes. And here, this one and this one. Yes. I understand. It should end with two branches. Yes. And you do this. What's more than three? This takes time. How to hang it. This is number 12. Up to here. I'm going to switch to a thinner wire. How do you hang this wire? It goes in at about 45 degrees, right? Yes. And here, I'm going to change the pitch a little. About 90 degrees. Yes, yes. About this much. Yes. And I'm going to cut it here. If I cut it, it will be completely fixed here. Yes, yes. If it goes in at 45 degrees, it will be wobbly here. I see. So I'm going to change the pitch here. And I'm going to put the next thin wire in. Do you put the next thin wire in from around here? Yes, from the back. It goes in from here. From here, it goes in here, right? This and this. And this and this. I see. If I put one wire in, it will go in from the middle. I see. I'm going to cut it with this. Yes. This is fine, right? Yes. If I cut it a little more. What about the flow? Which one? I'm going to use this one. I see. I'm going to cut it a little more. You're going to cut it a little more and then cut the flow again? Yes, I'm going to cut it a little more and then cut the flow again. I see. I want to turn it this way. Yes, yes. But I wonder what will happen to the wire. Should I shorten this? Or should I bring this forward? This is a little too big. I see. I think it would be better if it flowed to the right. I should hook it in a little more detail from here. I see. The completion is next time. Next time. I see. Yes. Thank you very much.