Sweet Little Flower Bowls from Polymer Clay, a Tutorial

DIY Cute Things
114 followers
Hi and welcome to Polyoriginals with Fiona Abel-Smith.
Today's tutorial we're going to make some sweet little flower bowls
from polymer clay. Now these came about as a result of this which is a teeny tiny little
bowl and actually this isn't a bowl this is something that I make to rest my covered goose
eggs on when I've made one of those and covered it in polymer clay and having seen that one I
thought well I can make one of those bigger and make some little bowls some little trinket dishes
This one I've used a little bit of a kaleidoscope in the inside and just a very simple petal
but I thought we'd have a bit of an experiment and make a brand new petal cane as well
so that's what I've done to give us this nice swirly effect in the petal
but an awful lot of the petals that I've already done as tutorials will look good
as these flower bowls and obviously you can add different layers and different things on the
underside and I'll show you how to do the petals so they curl under or how they curl up. This is
one we're going to do today and then I'll talk you through the colors of those two later on as well
and this one's a quite a short video so all the details you need are in the details below the
video the clay the equipment I'm using the sizes and the amounts and everything you need
so let's start by making this petal. I thought I'd do a nice bright petal cane for the little
flower bowl we're going to do so I've got white this is magenta with a little bit of white this
is a mix of blue and turquoise I've got purple and this is virtually all yellow with a tiny
little bit of green so the clay I'm using today is kato polyclay because it's a nice stiff
finish which means the bowls will be very strong when they are completed.
Cernit would also be a good clay to use, Primo would be good, in fact most of the recognized
brands of clay would be good but Fimo Soft would probably be the most brittle when it's baked
I've conditioned all of my clays thoroughly in their separate colors if you're unsure what I
mean by conditioning clay or how to do that I do have a separate video which gives you a few hints
and tips and techniques and I'll put a link to that in the details below. I've put all the colors
through on setting number three of my pasta machine which is a medium setting and on my
and the amounts for this this this and this I have got 14 grams or half an ounce and for this one
I've got 10 grams or a third of an ounce and to make up the green it was probably 20 parts yellow
to one part green that's the very small amount but it gives that lovely acidic green now both
the green and the purple are going to go on one side to be used later and we're going to start
doing a skinner blend between the white the magenta and this mix of blues again if you're
unsure about skinner blends I do have a video tutorial with a few hints and tips and techniques
on how to get a nice skinner blend and again I will put a link to that in the details below
but all we're going to do is cut diagonally through the two end pieces straight down the
middle piece double them up put them together so you've got the nice diagonal then the mid color
goes down the middle the white on the end I'll give them a little roll lift them off
press down along the crease and put them back through the pasta machine fold first each time
collecting folding in half to end up with a nice blend going from the blue through to the pink
through to the white I'll probably do that about 12 to 15 times and I'll bring you back when I've
got that done and we have our nice blend having completed the blend I'm just going to fold it in
half you can also chop it in half if you prefer make sure the fold is nicely pressed down
and put it through the same setting that I'm using dark end first to get a longer
thinner strip and now I'm going to put it through the thinnest setting on my pasta machine that is
usable so for me that is setting number nine again dark end first to get as long and thinner strip as
I can if you know your machine shreds your clay simply go down to the thinnest usable setting
that your machine works with once you have your long thin strip we are simply going to roll it up
from the light end towards the dark okay so there we have our plug of clay with the light in the
center and the dark towards the outside now because we are doing a petal cane you do not
need to be neat at any particular point and if from one end of the cane to the other end of the
cane there is a slight difference in the pattern that's fine this is a natural thing we're doing
and every petal does not need to be the same so don't stress don't worry about this
all we're going to do is exactly the same as we've done so often cut down into quarters
one at a time just pull the sides up slightly and then press along the bottom technical term
we squidge just to make them shorter now this is kato polyclay as I said this is a lot firmer
than the clay I normally use depending on which clay you are using it'll be slightly
easier on your hands do two at a time put those together and then do the other two
put all four together pressing in at the bottom and because this is kato and very stiff I will
then turn it on its side and press down hard with my thumb along this edge and then along that edge
so that eventually I'll bring the white points in and join up in the middle I will also be keeping
my hand on the end so that as I press down it doesn't push forward too much in that direction
so we end up with a rough sort of triangular shape to our cane now I don't want this to be
too long probably about two inches is the right sort of height about five centimeters so all I'm
going to do with the heel of my hand I'm just going to press down and shorten this so it's
about something like that now the way we get the swirl in the pattern is to pull out a whole of
one side so keeping the light side of the cane towards you and one side upright all of this
is going to be really pulled out so make it a long thin triangle out in this direction
if you can always keeping a little bit of an upright along this side you can already see
how these are starting to go out in that direction when you've got it a fair way you
can always put it down on the tile or your work surface you can also just roll slightly
get that moving until you've got quite a thin part point towards the outside something a bit
like that take the darker color that you're going to use as the accent and lay that on top and you
all the way to the end a bit so rest that on top and then cut away any excess
and I'm just going to pinch along the top to make sure it's nicely
fitting to the under color and then across that middle bit I'm just going to put it ever so
slightly down so that we don't get a gap when in a minute we cut this in half and put the two halves
together and then all we're going to do very gently is to curve this long bit in on itself
so just bring it over to start with slightly and then work just on the end
bring it over and again each time I've done this it's come out slightly different
there's no right or wrong way to do this just do whatever the clay is letting you do on your
particular cane but what we're looking to do is to add a nice swirl just on this one side
of our cane and just sort of pull it up until it almost looks like it's going to meet the white
but not quite and then we are just going to force that back into sort of like a triangular shape
by bringing that to a point and having it flat across the back here so yeah I'm just pressing
down on the side bringing the white up making it into more of a triangular shape and just go around
the whole cane getting it more into a triangular cane when you've got it to about it's getting up
towards three inches or seven and a half centimeters in length chop down through the
middle and when you put the two halves together you should have that nice swirl and that nice
movement of the pattern going outside so all we need to do now is put the two halves together
and then we need to make it more of a petal shape so we want it to sort of go this way
rather than sort of more of a diamond shape that we've got so to start with we want to
push these two corners inwards to make them more of a square shape to our cane
so just gently go down those sides just concentrating on those nothing else at the moment
just pushing in and as you do that so we start to get more of a square shape
once you can see that then you can turn it on its side and press down to accentuate the square
now we don't need the cane to go very long we just need to be able to take
however many petal slices you want to take so the ones I've done so far have been five petals on each
layer so today because I've got examples of those I'm going to do six petals so if I've got two
layers six petals on each I want to make this long enough so that I can take slices so once
we've got it dicely down into square shape then I'm just going to round off easy to show you on
that side round off the sides this being the inner part of the petal this being the outer part so
I'm just going to press on the edges to round off the sides and then I'm going to round off the top
by just rolling it across the tile and again you can press in and then with my fingers I'm just
pulling this front bit slightly more elongated so we make more of a petal shape so rounded sides
pulled up slightly towards the middle relatively even along the length so don't worry too much
because every petal can be slightly different and then I will rest it I've got a little bit
of a flat edge there so I'll rest it on that flat edge chop down in that direction
which should distort it to the least and let's see what we've got so those will be our petals
for our flower bowl so the next thing to do at this stage is to make our little centerpiece
I've taken the green clay and rolled it into a log and put the remainder of the purple back
through the pasta machine again on setting number three to give myself a piece that will roll around
the outside of that but first we're just going to put a little dot in the middle and we're going
to do that by chopping straight down the centerpiece folding it on either side and
with something like this cable needle or a little round roller anything that's the right sort of
size just create a little groove in the middle take a little cut off of your purple and roll
this into a very thin sausage and we're just looking to fit it down one side of our piece
as it's in the middle put the other piece back on top press it in slightly to get rid of any gap
and then put it on the purple use your blade to make it the right height
and wrap our piece around and all we're going to do now is press in to create a nice even cane and
then we will give it a bit of a roll to get the length that we need so my rule of thumb is if
I'm doing a flower bowl or anything to do with flowers and you're doing a center with a very
simple center like this is to have the same amount of elements going around the outside as you have
petals so as I mentioned I was planning on doing six petals so therefore I want one piece of this
in the middle and six around the outside so I need seven lengths of this so I will start rolling it
and as I'm rolling I'm pulling outwards with my hands and do this until I have a piece that is
seven times the length I want and I might as well work in inches or two and a half centimeters
as that's easy to do six seven and then simply chop your pieces
and then I say one piece in the middle six around the outside do one side turn it over to make sure
it's nice and even on the other and then exactly as we did with the original piece just press in
to get those pieces all nice and then reduce this to a size that you think will look nice
with the petals around the outside so I'm going to go slightly larger on this one than I did on
the other ones I've done just to show you how it looks and what I will generally do is cut a
piece off and hold it up and sort of have a look and think whether I like the size of that so I'm
happy with the size of that so I will take one piece from that and that sits right on the top
in the middle of our form just pressing it down and then it means it's easy to know where you're
going to put the petals because you can use these as a guide so you know you've got six petals to go
around the outside the next thing to do is to cut petal slices and then decide whether or not you
want to texture them again the thickness of the petals is purely down to you and what you feel
comfortable doing if possible try and make them as even as you can so it's more important to be
consistent than it is to be sort of thick or thin so just do what you feel comfortable with
but hopefully there should be enough there to sort of get you 10 12 or 14 depending on how
many petals you want in your flower bowl I like to add a little bit of texture to my pieces so
you can buy things like this online or in sort of shops which add the texture that you want
you can also make your own and this is a set that I've made particularly when I do
larger petals and things and I simply made them in clay and then use the two-part
moulding compound if you're unsure how to make your own texture sheets there's a brilliant
tutorial from Helen Briel and I'll put a link to it in the details below she's got a bowl tutorial
and part of that shows you loads of different ways to make textures but all I will do looks
very small on this big sheet but I will put my petal down there and then just very simply press
down just to add a little bit of texture it doesn't add a lot which I don't want a lot for these bowls
but it just adds a little something so you presume you can see there just a little bit
texture on either side and it does make sure you've got nice thinner edges to your petals
which looks nice as well so I've done all 12 of them and then all we need to do is work our way
around and put the petals on so I'm going to attach them so that they go over there and just
let them drop down and when you're putting petals on a flower you always put one on miss out one
and then do alternate ones and that way you will get a more naturalistic look to the way that your
so for a flower with six petals of course effectively you've got two rows of three
and I'll have a quick look see how they're looking make sure there's not too many gaps
readjust them as they need it and then just gently press them down against the form underneath
once the first layer is on you can add the second layer and that will be alternate ones
now when you add the second layer we're going to help protect them and keep them slightly proud of
the first layer by using little pieces of card and all I do is take a strip of card cut a piece
out like that chop the end off and I do one for each of the extra petals we're going to add to
the second layer so if you want the petals to sit so that they're just sort of going in the
same direction as the first ones then all you're going to do is you're going to bend this around
that way and it simply sits there the petal goes on top and this bit holds this one proud of the
outside if as I'm going to do on this one you want them to curl underneath again all you do is
you make the card curl that way and then you'll sit that there and the top petal again will curl
under and sit going around your card support and depending on whether your clay is very sticky or
not you can either do it at this stage as you put each petal on or put all the petals on do the base
and then put the clay in then put the card in afterwards the kato is a nice firm clay and
doesn't stick too readily so I can put my pieces on and then put the card in afterwards and I'm
just going to add these in the same way but so they go in between the two petals on top
and say once we add the support in you can either have them going
like that in which case I'd probably curl it slightly like that and have the support in place
or if we're doing this one then I actually curl the leaf slightly
and just set the card in place for each leaf like that so it just adds that little bit of support
as it is baking but say for this one I can do this right at the last minute
I'm going to take a little bit of the purple just to fill up that hole in the middle
and then we need to add a base if you've got enough left of your outer color use that if you
haven't then use one of the cutoffs from the end so I'll mix all this up and then I'm going to put
two layers of my thickest setting of my pasta machine one on top of the other to give me
probably about sort of half a centimeter about quarter of an inch worth of thickness and then
I'll cut out around so there you go there's my sheet and it gave me a nice sort of mid-violet
color which is lovely and I'm going to take a cutter and I'm going to use the bottom end of
one of these metal cutters because that's the size that looks good and again I'll put the
details of the size below the video that sits on top try and get it as central as you can
and then I just like to add just a little bit of extra detail I will cut a thin slice of this
and just rest that on top just give a little bit of added detail on the bottom of your bowl
so the first thing to do is to give that a bit of a roll because that's securing all of the
petals in place but we need to make sure that that is nice and flat so that when our bowl
has finished and it's baked it's going to sit nice and flat the easiest way I've found of doing this
is to get a sheet of some form of this is baking parchment but something like this baking sheet
baking parchment greaseproof paper even a piece of paper will work but something that's not going
to stick you then turn it the right way up and if you get something like a piece of board
then generally by eye to start with get down next to it and press it so it's nice and flat and you
think it's flat and if you're not 100 certain then put a roller on because the roller will soon tell
which direction it needs to be and when you get to the stage that the roller doesn't want to roll
you know your piece is nice and flat so you can turn it back upside down
that will peel off and now I'm ready to put all of my little paper pieces in so I've got all the
paper supports in and one thing last thing to remember if you're bending them downwards is
to make sure that they're not going so far down that they're lower than the height of your base
and all you need to do then is put that on some form of tile or baking sheet cover the whole thing
in aluminium foil is what I would recommend so that if your oven spikes during baking it protects
the clay but other than that bake according to the manufacturer's instruction for the brand of
clay you are using once it's cooled remove it from the form take out the little card inserts
and there you have a very sweet little flower bowl just to put a few little trinkets in
I'll just show you a few other colour options this cane was made from white a little bit of
yellow mixed with white and a touch of gold some red mixed with a little bit of white and again
a tad of gold and then gold as the outer colour and on this one I pulled the outer bit really
thin but left most of it not pulled out and this gives you a straighter form but then just this
difference down the edge that's one way of doing it and I've made two bowls out of that one this
one with the petals turning downwards and this one as you can see with them turning up and for
both of them they've got just the green a light green in the middle with the gold around the
outside so they're how they both look when they are finished this is quite a bright and vibrant
one this was white then into yellow then into magenta with purple around the outside and this
was like a midway pull so not as much as the one we did today which really spreads them out
sort of a medium way of pulling so as I mentioned depending on how you pull the
that piece out when we're doing the long part of the triangle depending on how far you pull it
and how wide you make that piece depends on the different effects you will get on this bit the
swirl on the inside when you put it back together so I only had enough to make one bowl out of that
I've done it with the upward turning petals and again I used a little bit of the light green on
the inside because I just think the light green looks nice as the middle and again both this one
and these ones had the five petals as opposed to the six petals that I've done with today's sample
and that's the tutorial finished quick and simple but giving some very sweet little flower bowls
or little trinket dishes I hope you enjoyed that one as always thank you so much for watching
and a special thank you to those of you who subscribe I really do appreciate it
I hope you have fun experimenting with these and make some little bowls of your own
see you next time that's it for now bye
