Welcome to the Canal de Artemaster!
Today we're going to be personalizing this precious MSI laptop.
with a value not exceeding or equal to 3000 euro
I'm going to be personalizing it for the Youtuber J. Gullen.
You'll wonder why.
Well, as a result of MSI hired me to do this job,
It's about making a personalization out here in the top.
And also inside and everything is Berserk themed,
You know that J. Gullen loves you.
Then, when you're done, I'll send it back to MSI,
They'll send it to J. Gullen and then he'll react.
The truth is that it's an idea I couldn 't deny.
Because personally Berserk also loves me
And, of course, I have a proposal for a collaboration with MSI plus J. Gullen.
Because I couldn't refuse.
So let's see what we do with this black beast.
It's an MSI Raider of the latest generation,
The most powerful
I'll tell you one thing, I can't commit to failures.
So that said, now yes, let's start.
Well, let's start with the tapa.
And before you start painting it, I should put a coat of imprint on it.
I mean, we have to mask a little bit.
Great, because you're wearing the portable well wrapped,
I'll take my spray of imprimation, we shake it well.
Important protection, we are going to use toxic products.
So, mascarita. What are you doing?
Okay, so we have this dry printing layer.
And this is gonna help us to get the paint that we apply later on.
Because it's much better.
And it's much harder than it used to be.
So the next thing is to make here a basic sketch
I'm going to come over here.
And this way we get the basic sketch.
It's a design in the back cover with The Beast of Darkness.
Those of you who've seen Berserk will know what it's about.
But this is just a sketch.
So let's start giving him details.
And well, basically what I did was fine-tune and erase
Some parts that didn't convince me at all.
The reason I made the white sketch
Because basically it's because the canvas is black.
If not, I'm not going to see anything.
But all those white marks will then disappear,
So don't worry about it.
For now, with these poscas we'll start giving it some color.
I'll start filling it with this red wine.
Well, this whole part of the gum or the lip, whatever you want to call it.
And I think it's appropriate to use poscas to make this cover base.
That's really a color opaque.
And what good, it adheres quite well to any surface.
With that red color too we'll be filling the eyes
And all this coloring we're doing now,
So are the eyes, the lips, the teeth, etc.,
It's just the base of the cap.
That's the base of the poscas.
It will allow us to paint much better.
With other paintings above and more details.
Once I had the base color white of the teeth
I've been doing everything with the black fur.
And it's basically because I wanted it matte.
Besides, with that same black color also used
To profile a little the eyes
There were some parts that needed some detail.
At this moment I'm beginning to give you a little texture,
A little bit of relief from the teeth with this beige color.
We'll continue in the same way, giving more details.
In the lips or the gums with this intense red color.
This is my first time personalizing a laptop.
in the most professional way possible
As you will understand I was quite nervous
I wanted to go out well at first.
And before you move any step
I had everything meticulously calculated.
In fact, as this was a project so complicated
I'll show you how I organized myself.
Because I think you can be very useful.
This is the website Milanote.com
This is the interface, we pinch here the board box
And we're going to create a new template called Moodboard.
This is a pre-established template that will be great
To compose all the ideas you have.
In addition, with the extension Milanote Web Clipper
You can save any image you find on the Internet
You keep it, it goes straight to your Moodboard.
This is great because you can order
Any image from the Internet on your Moodboard in a moment.
For the MSI project I made another folder
Como ves aquí tienes muchas más plantillas. You have many more plantillas.
But in this case I'm going to do it manually.
What do you want?
To get used to it and save yourself a little work.
But actually doing it manually is super easy and fast too.
So I started to put together the whole MSI project
more or less all the ideas I had in mind
And it's that even though this is a promotion with Milanote
I have to tell you that this is one of the tools
More useful than he promoted.
He really did use it and it's served me a lot.
And you just drag yourself to the right
You can make columns, add images, and put flechitas.
Include notes and even draw a manual if you wish.
So in about 15 minutes
He mounted me this piece of schema
Where everything is orderly and very clear.
Plus you can share it with anyone.
You can try Milanote totally gratis since the description
And now we're going.
I love how you stay.
We'll keep giving him another layer of imprimation.
Well, we've already given the base cover to Poscas.
But the thing goes on, we're not gonna leave it like this or much less.
And this new printing coating we just gave you.
Because now we're going to apply acrylic paint.
The typical boat, the ones of this type
And that printing layer is going to generate that kind of paint.
Now it's much better.
Which will leave us with a pretty top score.
We'll keep going.
We'll give him this, this and this.
Well, now we're going to continue with the acrylic painting of the boat.
And for that we will prepare the color mixtures
First of all.
This first color we are preparing will be for the fur
And as you've seen, he also added a few drops of medium mate.
With this we achieved that both the Poscas and the acrylic paint
That's usually very brilliant, thanks to that.
We get that matte effect and everything stays in the same tone.
For the fur I didn 't want to spend too much time with the grayish tone
I wanted to give you some tonos.
But I'd like to have some relief.
The printing sheet we gave you again
It's perfect for us to do the brush strokes.
With this kind of painting, I'm much better.
I'm not sure I'd be so happy.
So little by little and with a little care
For this computer with Berserk personalization
Salga the best possible
We 'll give him a brush until we have the coat ready.
And now we're going to the color of the teeth.
Here's the mix I'm making to give you.
A little bit of amarillento to the teeth
So that no one is so white
You know how many more colors and more layers we have
The teeth will also have more relief.
Then you 'll have this dark melon.
I was giving him a little more to relieve some shadows.
That's all with enough patience.
I had to go to the dentist.
I'm going to make sure you're doing it right.
And also to give it a little original touch.
I decided to make those little dental dots for you.
So once with all that ready
Because there are few parts left of the tapa.
So now let's proceed to the delineation
I'm going to be with Posca.
Here at this point is where I'm gonna make you disappear
All those white markings from the initial sketch.
And you'll see how it completely changes the whole drawing.
In fact, I'm not the only one who sees a line.
because the whole of the pellet
I'm not sure.
Let's give it the contrast it needs.
And make them stand out by delineating each of them.
Now it's really starting to take shape.
Well, there you go.
But really not yet ready.
I want to add a few more things.
And we're gonna start by giving him some aerography touches.
So let's get on with it.
Protexado, please.
Let's continue with the aerograph.
I'm going to prepare there a little bit of paint red quite brilliant.
This was one of the most critical parts of the process.
I'm not really an aerograph specialist.
I was quite afraid.
But I saw quite necessary the use of the aerograph in this design
Yeah, I 'd be so spectacular.
I wanted you to stay as good as possible.
So I armed myself with courage and began to give
Some touches with aerographer
To give a light to each of the eyes.
Thank you for taking the time.
Practicing with the aerographer
Because the truth is that it's a tool
It's pretty complicated to use.
I had too many failures or almost nothing.
And making capas, first applying a little red
Then a little yellow and then a little white.
I could make those reliefs, those flashes of lightning.
Okay, well before we continue let's sell this.
We're gonna use this acrylic varnish.
I wanted to buy it with my mates.
Because I think it will get better.
I'm going to give you two capas.
So that I'm well protected.
Well, that's how we'll take it.
I think he's getting rough.
I hope I also mole J. Gulen because if not...
The thing is that the top part is still not there.
The lack of ginda del pastel
And that last detail will be a drop of blood
Crying for the wolf
And that's what we're going to achieve with epoxy resin.
For that I'm going to use this silicone rubber.
de componente A and B
What are we gonna use to make that mold of the drop of blood?
So without further ado, let's get on with it.
Well, yes, to make this drop of blood I needed
First the contour of the logo
And then make the design of the dripping blood.
I thought I had to wear something distinctive.
So, well, I decided that this drop of blood
I was in 3D.
Once with the gota list me saco aquí mi pasta Sculpey
And I started to do it on top of the drawing he made.
The 3D model.
So little by little I'm putting there the clay
I'm on top of the drawing I'm doing.
I try to give it the best shape possible.
The drop is falling from the logo.
Finally I'll soften it with the brush.
Once you have the hard piece
I can make the gum mixture A and B.
It's as simple as taking the same amount
Proportion of the part A and of the part B
Mix it and we can put it anywhere.
to make you our mold.
This pasta is totally moldable.
For about 20 minutes.
And then little by little you'll endure.
This is ideal for making replicas.
For example with epoxy resin
That's exactly what we're gonna use it for.
After letting it dry for 3 or 4 hours
It's ready and we can unmold.
Now we have this silicone paste.
with the shape of the drop
Which we can fill as many times as we want.
So I'm going to prepare my epoxy resin.
A little bit of red coloring too.
I'll make the mixture with its exact quantities
I'll take a little bit off before I pour all this resin.
with the help of a syringe to be more precise
And even with a little help I'm gonna help
in the most sensitive areas
That in reality is a piece of small
I had to help myself a little.
We're not looking for a super-voluminosa piece.
I'm not a simple touch that you notice there.
You look good.
After letting it dry for about 24 hours
so that the resin heals well
We can unmold with care.
We have the piece list.
How to apply vanilla spray after applying
There were some asperges left.
I decided to deal with a $10 million bill.
This is simply what I'm gonna do.
Leave the surface more smooth and professional
Don't worry about it.
Now we just have to cling the drop of blood
There you are.
So we stick there the piece
with pegamento componente A y B
So that he never gets off there again.
The drop of blood by the way shines
Because I told you a barnyard.
La tapa me gusta bastante como ha quedado La tapa me gusta bastante como ha quedado La tapa is quite like the way it has fallen
But I think we could also give it to you.
A special touch here.
And the most professional way I've ever met.
Doing something here is like a stencil.
For that my friends of Cricut
I have envyed this piece of machine
That is a total pass.
Basically it's a cutting machine.
and a cutting machine of very high precision
So let's see how it works.
The first thing I have to do
It's here that I want to spend my time.
Photoshop and detail them a little.
Once I have it, I simply pass it.
The program that carries the machine itself
What is it called?
And there you go, putting your designs.
Cut it out, the size is the same.
With the one you want to get out of the machine.
I'm going to use the face of Guts.
And also the logo of Berserk.
We open our machine.
We're going to introduce our vinyl.
What we want.
From the computer program
Let's get started.
And the machine gets to work very quickly.
In a matter of a few minutes
We 'll have all the facts.
With a precision that the truth is exemplary.
Those two were for the extremes.
But I also wanted to make a cut.
The stigma of the condemned
I'm going to go to the touchpad.
Ahí no quería painting with spray
I'd rather stay there.
You can't take it back.
But with a sticker.
I was solving the problem.
Now you're using our stencils.
We just retired the records.
We've got everything ready to go.
a pegar estos stencils is a pegar estos stencils is a pegar estos stencils is a pegar estos stencils is a pegar estos stencils are a pegar estos stencils are a pegar estos stencils
That will help us to have
A perfect calco de los dibujos. I'm not going to tell you.
In the same way
I'm going to the Rose Garden.
No, I'm going to paint.
We first apply an imprimation
After you let it dry
Now we apply a red spray.
totally common
And with that we'll have finished the stencils.
It's time to remove the stickers with care.
And little by little we're leaving here.
The design of the Guts and the logo of Berserk.
How was I talking?
It's a pegatina.
By the way the touchpad is still going
I'm going to Los Angeles.
and in case of a J. Gulen
I don't like to be confronted with that pegatine.
If I could just take it back.
Well, that's how we've fallen.
This is totally personalized.
The case of J. Gulen.
It's been about 9 days of work.
I have a headache.
Thinking that everything will be perfect
Now I just hope that J. Gulen likes him enough
Because at the end of the day this computer
It's not for me, it's not for him.
I'm in the comments.
If you want us to make more customizations like this.
No solo of computers
It could be other things.
or for other youtubers.
So que amigos y amigas (As you like friends and friends)
See you on the video.
Subscribe if you want to see more content like this.
Keep it up.
And we'll see you very soon in the next video.