Over the past month I've been playing with the idea of building a really unique exotic bow and now it's time.
Genuinely thank you so much for joining me today. It truly is an honor. I hope you enjoy this.
So I'm just going to do the rip cuts on these two pieces to take off the strip for the laminations.
Gotcha. And then I'm going to resaw those. Limbs first and then handle will be later. Gotcha. Yeah.
Sounds good. You know to be honest the hardest thing is actually using the fiberglass for this
because the riser is two inches and our fiberglass is oh because we got inch and three quarter.
So like the worst thing is if it separates in the middle.
The first thing to do with any project is to solve the future problems now.
Secondly we design and plan the best we can before we get our hands on with the material.
This will give us a higher success rate of getting the results we want. Yeah.
Based on what we came up with yesterday the combos we don't have enough in the Peruvian. Okay.
I have heard it said you do not want to be the smartest person in the room.
Meaning humble yourself and surround yourself with people who have skills and knowledge in areas that
you do not. It is at this point that you can grow. So personally I look for friends that are wiser,
stronger, faster, more spiritual, are better off financially, have older kids, are happier,
and are great at communication. And the same is true for business. I try to make sure that everyone
I hire has a different skill set than me. This means as a unit as a team we can go so much further.
I was thinking about only starting at like a 16th or like 330 seconds or something.
So what I may do is see how that ends up and then if I need to take more I can.
Tightening it a little bit. Yeah just give it a little more tension.
And then get the bearings as close as possible but the fence is kind of yeah in the way of that.
Meet Zach. He's one of those people. He has a really unique skill set with a background in
mechanical engineering and then running his own fine woodworking business. Combining those skills
is basically the perfect storm to make fantastic bows. His precision, accuracy,
and system building is helping Shatterproof go to the next level. Gonna be a bow.
We take our work extremely seriously but we have a lot of fun while doing it too.
Speaking of fun I was recently on the Outdoor Podcast and it was a great experience and we
kind of talked about making a really unique bow in that podcast. So that's what we're doing right
here today is making four really unique bows. We're gonna send one over to the guys at the
Outdoor Podcast just kind of as a big thank you and then we're gonna auction the other three off
on our website. To build a bow like this it takes significantly more time than the other bows we
build but it's gonna be worth it because these turn out fantastic. So Zach's gonna prep material
here for the next eight hours or so and I want to show you how he does it because the results are
stunning. What's the minimum planer thickness you'll do? Uh it's like an eighth. Eighth? Um
you can do thinner but. Doesn't it start like chattering more? Yeah it does. One six right now.
Is this accurate? And you don't have to recalibrate every time you turn it on do you?
No. There was one time where it it lost the number um but in general not too bad.
So I've calibrated a couple of times and it's been coming out pretty good.
We're using clear fiberglass today to highlight the wood. So on the belly of the bow we're gonna
use red heart and on the back we're gonna use Peruvian walnuts. Right now Zach is prepping the
limb laminations. This will be part of the working part of the bow. We're gonna have the clear
fiberglass, we're gonna have red heart, we're gonna have bamboo, Peruvian walnut and the handle
will also include curly maple. It's gonna be fantastic. To maximize this really nice material
we're starting with the limb laminations and then Zach will go on to the smaller pieces
to build out the handle. Now that the roughing is done on the planer it's time to bring the
over to the drum sander to bring them down to 20 thousandths of an inch.
After a couple hours of drum sanding it is now time to prep the handle material.
At this point Zach is contemplating the next hour and a half he has to spend planing wood.
This is a unique method for gluing many pieces of wood together. By placing the wood in a vacuum
bag and using a vacuum pump we can extract all the air out of the bag. This creates a
clamping pressure that is strong enough to hold the wood together until the epoxy cures.
On this first bow we have 11 different pieces of material that need to be aligned and held together
and this system makes the process a little bit easier. And 24 hours later we're ready to
unpackage this and keep working on the handle. That break? Yeah. Next we will clean up the handle
and attempt to get our robot to behave and 3D carve the riser before we move on to the glue up.
We will also finish prepping the bamboo, red heart, and Peruvian walnut for the limbs.
And then finally we'll be able to bring this bow to life by compiling all of its components.
Not only to make a beautiful bow but a great shooting bow as well.
We have never machined a riser with so many fiberglass accents and this presented new
problems. You see fiberglass cuts different than wood and what we need is a program and a bit that
can accommodate both. So first Zach installed a fresh ball nose bit and secondly he tweaked
the CAM software to optimize the toolpath for machining fiberglass and wood on the same program.
This worked and we were finally able to carve out our rough riser. The CNC is great but it can't do
everything. Now it's time to clean up the riser. Zach will first feather the fade outs. This is
very important in order to achieve a great tiller. It also prevents a hinge in the transition from
the riser to the limbs. We have done a lot to get to this point and that is because the quality of
bow comes from the quality of the preparation. If the bow is going to shoot great the preparation
needs to be on point. Where a self bow is primarily built after the glue up or after
the stave is shaped a fiberglass bow is primarily built in the preparation. So hold on because this
is coming together quick.
Also because this glue is so viscous like it doesn't want to flow out of the way so if you've
got like a bigger thicker section in the middle of the limb that glue is not going to want to
leave. Once it starts heating up it starts squeezing out a little bit but if it starts
curing at the same time before it's moved out of the way it hasn't moved out of the way.
Is that where you see those bigger glue lines you think? I think so. That's the cause? I think
sometimes it is actually the glue sometimes it's alignment and gaps and stuff. Sure.
But especially like I've had to be really careful with that on the riser glue ups
because I'm curing those cold. Yeah. And I've noticed like some massive,
not massive, but some like larger glue lines in the centers. Yeah because you don't have the heat
to help spread it out. Exactly. Yeah. So the heat really does pretty much everything we need it to
do. It takes so much more time. Three full bows including the handle for one kind of. That's true.
We're doing so many laminations. You got a quick prop to run by you. Proposition. Okay. For products
we're shipping out of. Ready? It's gonna be a 60 pound bow. No. But it's definitely heavy.
It's just a lot better. Lamination. Can you tell by just pinching it in there Cass? Like
I can make a guess. What's your guess? I think it's going to be a 45. 45. And you think 50?
Maybe. It feels pretty stiff. It did feel pretty stiff. Well and there's also a little
more glue lines. So maybe it will be a 50.
Pretty good. That looks really good. Oh it looks really good.
This stress leeching out of me. Leeching out. Wow. Yeah. Oh my god.
So I take a little bamboo backer off. I'm going to glue another piece of fiberglass to it
and then I'm going to be able to re-saw it down the middle. To make two? To make two. And so they'll
be identical. So the second piece of fiberglass will go where the bamboo is. Yes. Nice. Yeah.
To basically make these but I don't have to make two by hand every time. Yeah. The only trouble is
that I think that there may be more gaps in the other side. Oh yeah that makes sense. But we'll
see. Definitely on these ones like the way I did it it's a marquetry technique. What is that?
Marquetry is where you, usually by hand but you can do it with a scroll saw too, where you
cut out a whole bunch of different thin veneers of different species of wood and then you make
a picture with all the different colors. Okay. Where you undercut it so that the top edges
fit together tighter but there's a gap on the underside. Oh interesting. So when I took these
off there was this massive gap down the middle. I was like no. And I was like oh I did that on
purpose. And this side is the important side. So which orientation are you going? Is this facing
the outside or is this facing the handle? I was going to face these down. So it's pointing to
the handle? Yeah. Right here is where the string group goes and it thins down a lot there. So I
can actually include more of this top red section if I put it like that. And so unfortunately
actually it's going to be cut off like here. Sure. Because if you look at kind of the length here,
which I may also just make these a little longer because having a longer tip overlay really won't,
like it's not really bending a whole lot up here. No that's not going to affect it. So having like
a little bit more of that and the full like, I want to get to the point of the maple where it's
still kind of before the transition. Which I think would be cool. I wanted to come up with
something super unique with the tip overlay so I said Zach do whatever you think would be the
coolest. And he comes up with this marquetry technique and does a really cool tip overlay
and adds a lot of clear fiberglass. I think it'll give it a really cool look and we'll see how it
turns out. All in how much longer will this bow take than the normal bones?
Probably 6x. So we need to sell it for six times the amount of money?
You need to sell it for 12x the amount of money. Starting bid at 7,600.
I like it. Materials was about 12x too. Drop on the next veneers. I think
trying something more along the lines of like 700. You think it'll drop that much huh? I think it
could but like we could aim for a 50 with 700. 700 off of each piece or on each piece so you're
dropping three tenths of an inch. Yeah that could be significant. Well I'm dropping a...
Am I thinking of that wrong? No no I'm dropping 150 on both. Yeah I mean I don't know. Yeah
that'll be worth it. We were just trying to work out what poundage that these bows will come out to
because we can use thicknesses from other bows but because we have maybe a different amount of
glue lines we also have different materials that are going to react differently and some are going
to be stronger some are going to be weaker. We're kind of guessing on this red heart bow for this
first couple bows. We're going to make four in total so we should be able to get it pretty dialed
in by the last one but that's part of the difficulty of trying out new materials is
all of your previous measurements don't apply to the new bow that you're making.
Zach is now setting up the CNC jig for tip overlays. This will make it symmetrical and
do the roughing so that he can finish it out by hand but have really good guides to go on
to make it as good as possible.
This is a really big turning point with this bow. It's been a week or two in the process and Zach's
done five, six, seven, I don't know maybe even ten glue-ups just to put the handle together,
the tip overlays together, put the bow together, put the tip overlays on the bow but now everything
changes. It's just removing the unnecessary material to make a fantastic bow. So Zach's
going to apply his precise magical touch to sculpt out the material we don't need to make
this bow shoot as good as possible. So if you're not excited yet you better get excited because
this bow is going to be amazing.
So Kramer was right when he said the hardest part of making a bow is the part that feels like it should take the least amount of time
and doesn't actually take the most amount of time but takes a lot more time than it feels like it
should take. All right here we go.
All right so we've got our bow here finished sanded. The first step we do is apply a coat
of shellac, sand that at 320 just to get everything nice and smooth, fill some of the pores especially
on this walnut here and then from there we also use that to kind of amber the wood, make it really
pop color-wise and then we use a water-based top coat that pales things out just a little bit,
which is why we do the shellac first. So these have already had the coat of shellac
and a light sanding so these are ready to accept the final finish.
So
each bow has a slightly different color pattern. This is 104. This one's going to
Bullhunter Planet and then the other three are the auction bows. There's 204, 304 and finally
404. Now the tip overlays on each one are a little bit different so you'll see each one
has a little bit different pattern in them that matches with the handle.
It goes right in the center so that's the goal.
Thank you guys so much for watching. I hope to see you on the next video. See you then.