#SSBC is exactly as it sounds. I am more of an enduro bro, who cares more about riding my bike, than tinkering with my bike. My friend Matt, from Bootleggers Bikes in Jeffersonville, Vermont, is definitely more of an engineer, who loves to tinker. Together, we are going to break down complicated bike subjects into a simple chat that will help you learn more and enhance your riding. Every episode will be a new and exciting subject, and there are no limits to what we can discuss.
On this episode, we walk you through the wonderful world of spring mountain bike maintenance. We all love our mountain bikes, so it's very important that you prep your bike from top to bottom before you jump into the spring bike season. Taking a little time to tune up your bike in the spring will make sure that you bike is running smoothly, prevent early season failures, and ensure that all of your components last a lot longer.
If you have any added information or insights on a subject, or any suggestions for future videos, don't hesitate to comment below and share. We want this to be a community discussion and welcome all perspectives!
Most importantly, enjoy the video and be sure to leave a comment below and subscribe for more!
- My Ride: https://dirtlab-usa.com/ - Check out the Nobl Carbon Wheels I run: https://bit.ly/2VnRga7 - Check out my favorite G-Form pads: https://www.pntrs.com/t/8-12298-293462-193365 - My riding gear: www.100percent.com - My favorite riding snack: www.untapped.cc - Coffee fan?: www.atomicroastery.com - Need some delicious protein for recovery?: www.ascentprotein.com
What's up everyone, Jimmy from MTB Travel Review here and welcome back to another episode of Stupid
Simple Bike Chat. On this episode we're going to talk about a little spring tune-up. Spring
cleaning. Everything that you need to get your bike ready for the spring season, specifically
your mountain bike. So typically what happens for most of us is we ride hard all year and put our
bike away soaking wet and filthy. Then we leave it in the garage or the basement all winter long
in the springtime, pull it out and expect it to be ready to roll. But it turns out there is some
significant maintenance that should be done to make sure your bike is both safe and fast for
the spring season. So we're going to walk you through all of the key points that you should
check, all the maintenance that you should do before you jump on your bike in the spring to
make sure that you are ready to roll. First things first, we are going to start with the wheels
because wheels are pretty important on a mountain bike. So the first thing I always recommend is
taking a look at your tires and making sure they still have what we call tread life. After you run
a mountain bike all season long, you're on and off the brakes, you're skidding and sliding all over
the place, you tend to wear down the little knobs on your tire that help you hold the bike to the
ground. Typically it's pretty easy to tell if the treads on the tire are good or they're pretty
worn. You'll start to see cracks, the knobs start to fold off of the bike. But what you want is nice
sharp edges on your tire to make sure you're going to have optimal traction on the ground.
Next up, I think we're going to want to, most of us are running tubeless, so we're probably going to
want to check and make sure we have tubeless sealant inside the tire, right? And it hasn't
turned into a dinosaur creature. Whether it turns into a solidified ball or just simply dries up,
you'll just want to add sealant. I don't necessarily think there's much to check.
I mean yeah, if you have eight ounces of sealant swirling around in the tire, you don't need any.
But typically that's not the case in the spring. Typically you just need to add, you know, four
ounces-ish, depending on the tire size. Along with those tires and, as Jimmy mentioned, tread life
and slashes and whatnot in the tire that may not be an issue yet but could be. Also dents and dings
in the rim, those are other things that could turn into a catastrophic issue in the first ride. So if
you can address that in the spring before you start riding, that's good. The other thing you
might find is that sealant and air start to evacuate from the nipple hole in the rim. Sometimes
that's indicative of your rim tape. There's no more adhesion or the tape's bad or it's got,
there's a hole in the tape. So you may have to re-tape the rim to prevent that air and
sealant from leaking into the inside of the rim and out the spoke hole. And then lastly, one thing
that I'm pretty terrible at is checking your spoke tension. A lot of the times they'll just
have the shop do this because I'm not an expert and you need a special tool to check your spoke
tension. But you want to make sure none of these bad boys are too loose because at the end of the
day, if your spoke tension is off or it's not even all the way around your wheel, you're more
likely to have catastrophic damage to your wheel, right? Because the spokes are what keep everything
in line. That's right. And spoke tension, you know, a quick check as Jimmy did and just, you know,
feel if things are somewhat consistent. That's a good thing to do. The tensiometer or the tool that
Jimmy mentioned is the best way to determine if your spoke tension is where it should be.
The hubs also being part of the wheels, like it's a good thing to check to just remove the wheel
from the bike with the axle in your hand and give it a spin and see what you feel. Like if it feels
really rough, that's probably an indication that you've got bearings that are going bad or are bad.
The other thing to do is a freehub body service. So this is a DT Swiss hub. You can simply remove
this end cap and pull the freehub body off, which is, this is the part that holds the cassette.
And these are the internals. It's the part that ratchets, the clickety click part. These are all
wear items. And you know, they can wear quickly or not depending on the abuse and the grease and
how much they've been serviced. So this is something that, that should be serviced annually at least.
And that's one of the things the bike shop's always going to do. So if you're not comfortable
with that, or you're having trouble, definitely check with your local bike shop. I found that
freehub bodies aren't always the easiest to remove, though they're supposed to be. So moving
on to the drivetrain, right? What should we look for in the drivetrain? And when we say the
drivetrain, that is what drives the bike. So your cranks, your chain, your derailleur, your cassette,
everything that makes the bike propel forward when you put power on your legs. Yeah, I think it's a
good idea to disassemble a lot of these components. You know, it's relatively easy. Most don't require
super specialized tools. The cassette does, it's a lock, there's a lock ring tool and a chain whip
to help you remove that. But disassembly of these, visual inspection and cleaning, and then visually,
you know, checking to make sure that the teeth on your cassette and chain ring look normal. And by
normal, you know, consistent with what they looked like when they were new. You might find that teeth
are chipped or missing, you know, that might be a good time to replace the cassette, or at least
it will allow you to prepare for, you know, a new cassette mid-season. Checking for bent links in
the chain, and you can simply, with the drivetrain intact and on the bike, you know, you can spin
your cranks in reverse and get a good visual inspection of the cassette, the chain ring, and
the chain. But there are chain checkers that basically indicate, you know, when it's time to
replace your chain. It's a good idea to get in the habit of replacing your chain. You sometimes can
get two, three, four, five chains per drivetrain, so it's kind of like changing the oil in your car.
You're just prolonging the life of the drivetrain by replacing the chain often, and a chain checker
from Park Tools or Pedro's will allow you to measure that and determine when it should be
changed. And then lastly, I think just running through the drivetrain, right? So shifting gears,
making sure that it's upshifting and downshifting properly. Sometimes that can just be tension in
the cable, sometimes it's just gonna be minor tweaks in the derailleur, but you just want to
make sure it's shifting right. And if you don't know how to fix that, there are other videos out
there on that, or again, just go to your local bike shop and they'll take care of it and make
sure it's shifting top-notch. All right, next up, talk to me about suspension. What do I need to do
in the spring? Yeah, there's a couple basics we recommend annually. Three really. Fork lower
service, that's basically a 50-hour service on the fork. It's changing the oil. You know, the oil is
going to get dirty, much like the oil in your vehicle engine. That gets dirty and breaks down
over time. Same with suspension fluids and oils. If that's something that you're not familiar with,
that might be some work for a bike shop. If you are, it's a pretty simple service. And on the
rear shock, it's much the same as the front, a basic service. And I would say for suspension,
this is more of advanced bike tech, right? If you're at home and you're a beginner, I wouldn't
just start taking your suspension apart. There's a lot of different chambers and seals and build
kits, so that is something for me that I leave to the bike shop. And then third is, we call it a
suspension pivot service. Basically disassembling the suspension pivots. They have a tendency to
collect dirt and grime, and also there are usually bearings and bushings in there. So, you know,
getting those disassembled and having the ability to visually inspect them and feel them to make
sure everything's kosher is good. Yeah, a lot of bikes that I'm guilty of, all of my pivot bearings
are usually completely blown. And you have to understand, every time you wash the bike, especially
if you're at a bike park and you're using a power washer, which is technically not great, you're
forcing dirt and grit into all these cracks, right? And that goes into the water and seeps into the
bearings, and then it just becomes a rusty mess. So, something you should do, because it does
change the performance of the bike a ton, right? Having all proper bearings. All right, brakes.
What do we need to think about with our brakes? Yeah, brakes, you know, there's a couple of things
that we want to pay close attention to. One is the rotors. There's usually a minimum rotor
thickness requirement. Sometimes they're stamped on the rotor, so it's very simple to measure it
with paracalipers. Also, just a visual inspection to see if there's any scoring or chips in the
rotor. The brake pads, obviously, looking at the brake pad and how much material is left, you know,
you can compare it to a new brake pad, but essentially you're either looking at having
brake pad that's still producing from the aluminum or steel backing, or none. If you notice that it's
very low and starting to almost become flush with that aluminum or steel backing, then that's
time to replace the brake pad. And then an annual bleed, that's pretty inexpensive if you're paying
someone to do it. It's also something that if you're mechanic savvy, that's pretty simple to do,
but bleeding your brakes to get any air that's in there out or to flush dirty, dirty fluid out of
the system and put new fluid in there. And when you say bleed, these are hydraulic brakes, right?
So they have a hydraulic fluid in here, right? So just like the oil in your suspension, over time,
the more that fluid moves, it kind of degrades and breaks down, so you want to make sure that's
fresh. If you're not familiar, you don't have a bleed kit, which is what you'll need to do that,
definitely recommend taking it to the shop. Typically, it's easy to tell if you need a bleed,
because normally you'll have a nice sharp brake, it stops really hard. Once it starts to get
smushy, the brake lever pulls into the bar a bit more, you can tell that your brakes aren't
performing the way they should, and that's when you'd normally look at getting a bleed first,
if not new brake pads or rotors. Last but not least, dropper, right? Dropper posts are kind of
run-of-the-mill now, and there is some service that should be done on a dropper every year.
Yeah, I mean, it's really similar to the fork and the shock, you know, you've got basically two
components that telescope within each other, so the introduction of dirt and foreign materials is
something that happens. Occasionally, you run into the requirement to replace some internal components
based on what you're seeing, but yeah, it's pretty common to just disassemble, clean, grease,
reassemble. Yeah, the last thing I think that's very important is just a visual check of the
entire bike, especially the frame, right? Aluminum frames aren't as guilty, but carbon frames tend to
crack in places and you don't notice until it's catastrophic, so you really just want to
run over the whole bike, make sure there's no cracks, nothing that looks out of whack, right?
Just to make sure that you're safe and you're not missing anything. Yeah, if you're going to
this extent and it's a service that you're going to do once a year, I would also go to the extent
of, you know, disassembling the headset, which is where the fork component goes through the head tube
of the frame. There are two bearings in there, one on the upper side, one on the lower side, so
disassembling those, checking them, see how they roll. They should roll smooth, cleaning them
and reassembling, and the same for the bottom bracket, you know, making sure those bearings
rotate and roll smoothly without any notchiness. Clean those up and then reassemble your
ear cranks. I think that pretty much covers it, obviously a nice spit shine and making her look
good. It should be pretty simple, it sounds like a lot, but it's really not once you start to
understand the components and the visual cues and the things that you're looking for
to make sure you're ready to go. If you have any questions, comments, anything that you want to add
that we forgot, feel free to leave it in the comments. If you're a fan of the video, we're
going to be doing a bunch more of these in different depths of complexity, but again trying
to make complex subjects much simpler for you guys, so make sure you like and subscribe to the
channel. We appreciate your support. Keep riding, y'all. Okay, are we good? I'm gonna do this whole...
First things first, let's start with the wheels, because all bikes...
Tenshiometer, is that tenshi? Tenshiometer, yeah. Find one of those on the Google Earth.