#SSBC is exactly as it sounds. I am more of an enduro bro, who cares more about riding my bike, than tinkering with my bike. My friend Matt, from Bootleggers Bikes in Jeffersonville, Vermont is definitely more of an engineer, who loves to tinker. Together, we are going to break down complicated bike subjects into a simple chat that will help you learn more and enhance your riding. Every episode will be a new and exciting subject, and there are no limits to what we can discuss.
On this episode, we walk through the differences between a Mountain Bike and a Fat Bike. These two styles of bike are similar in many ways, but also have very different purposes at the end of the day. Dig in and learn from scratch or test your knowledge!
If you have any added information or insights on a subject, want to shred our opinions or facts, or any suggestions for future videos, don't hesitate to comment below and share. We want this to be a community discussion and welcome all perspectives!
Most importantly, enjoy the video and be sure to leave a comment below and subscribe for more!
- My Ride: https://dirtlab-usa.com/ - Check out the Nobl Carbon Wheels I run: https://bit.ly/2VnRga7 - Want to protect your wheels?: www.cushcore.com - Check out my favorite pads: www.g-form.com - My riding gear: www.100percent.com - My favorite riding snack: www.untapped.cc - Coffee fan?: www.atomicroastery.com - Need some delicious protein for recovery?: www.ascentprotein.com
What's up everyone, Jimmy from MTB Travel Review here and we are back
for another episode of Stupid Simple Bike Chat.
For those of you that are new to the series, I am a self-proclaimed enduro bro.
I am huge into mountain bike racing, spend most of my time enduro racing.
This is Matt, one of the owners of Bootlegger Bikes and a self-proclaimed bike mechanic or
bike nerd. The goal of this series is to take super complex bike subjects and make them easy
for you to understand. Today we're going to talk about a pretty basic subject but I think something
that a lot of people are looking for information on and that is the difference between a mountain
bike and a fat bike. So let's start with the basic differences between the mountain bike
and the fat bike, right? And that's going to be their purpose. So the mountain bike is what I
typically ride. This is my new Orbea Occam LT jacked up with a 38 fork on the front to make it
enduro. Endurbro. Endurbro. So the mountain bike is basically meant for single track mountain bike
trails. Relatively skinny tires, made for the dirt, it's tall, it's lean, it's supposed to go
fast, supposed to have good traction but also be able to handle big sends, jumps, pretty much
anything you throw at it. So generally speaking if you're riding a bike in the woods on single
track you're probably going to be on a mountain bike. There are a lot of different mountain bikes,
there are single speed, there are full suspension, there are hardtail. We're not going to get into
that today we're just talking about the general purpose. Now on the other end of the spectrum you
have the fat bike. Now generally speaking the fat bike is just that, a fat bike. And when they say
fat bike they're referring to the tires, right? So what is the general use of a fat bike? Yeah
generally fat bikes are used on softer terrains, most specifically sand and snow. If you think
about those two riding surfaces they typically are difficult to ride in with a skinnier tire,
therefore we have fat tires. We run them at extremely low pressure, the low pressure gives
us both traction and surface area. So the more surface area the better we stay afloat on those
soft riding surfaces like sand and snow. So the mountain bike typically for like hard packed dirt,
right? Yes. Slightly skinnier tires if you ride anything like mud, snow, sand because of how
skinny the tires are it's typically going to sink in and make a rut. Exactly. Makes it pretty
miserable to ride but you put in the fat bike with a super wide soft tire it's not going to
sink into the snow, the sand, or the mud as much which kind of extends your window. We're up here
in northern Vermont so there's snow a lot of the time, like more than half of the time. So we have
to hang up the mountain bike and either you go skiing, which you know I'm getting there, or you
get a fat bike and you ride some really nice groomed trails, right? Now can you ride a fat bike
on regular mountain bike trails? You can, it's more of a niche than typical riding or you know
using the right tool for the job. You know it gets cumbersome, it's a much slower pace because
of the much larger tire and it's just not nearly as enjoyable as using you know the right tool for
the job, a mountain bike. There's folks that will use a fat bike as a you know it's their one bike
quiver so they'll gravel ride with it and yes you can do it but again the right tool for the job
there is a gravel bike. So we like to think of the fat bike as a very specific tool used in Vermont
or in the northeast as a winter bike riding on in the snow. Your winter weapon. Winter weapon. So now
that we know the basic differences for intended use with these bikes, let's talk about what makes
them most effective at their purpose, right? Starting with the mountain bike, first thing
you'll notice is it's a bit taller. Especially on a fully suspended mountain bike like this Orbea
Occam, you know it's running a 29-inch wheel that's a very large diameter wheel which is
ubiquitous and very appropriate for that style of riding and it's also got six inches of travel or
150 to 160 millimeters of travel. So the bike geometry has to be designed around accommodating
that suspension travel as the bike goes through its travel. So higher center of gravity is okay,
you're generally on hard pack dirt. The 29-inch wheel has very much become the optimum wheel
for multiple reasons. That's pretty much what everyone's riding. The other thing you'll notice
on the mountain bike is, like Matt said, the suspension. Not all mountain bikes have suspension.
This is a full suspension mountain bike. It has both rear suspension and a fork in the front for
front suspension. It allows for a very plush ride. There's also a lot of other fine-tuned differences,
right? You'll notice the brake rotors on this bike are significantly larger. A lot of that has
to do with the speed that you hit on this bike, right? Is that more braking power, generally
speaking? Yeah, I mean the speed that you're hitting things, the style of braking. So typically
if you're traveling at a high rate of speed, you need to slow down quickly. So you're on and off
the brakes significantly, whereas at slower pace riding like a fat bike, you don't tend to be on
off the brakes as much. So the last thing we'll talk about on the mountain bike, which is a
significant difference, of course, is the tires. What is the general tire width on your everyday
mountain bike? You know, generally you're starting, I would say, at about a 2.2-inch width for
cross-country style bikes, all the way up to 2.6 for mountain bikes, full suspension,
you know, all mountain bikes or enduro bikes. This bike's running, what are you running, 2.6,
2.5, 2.6? 2.5 front, 2.4 rear, which is a perfect transition over to the fat bike. Obviously,
the most noticeable difference being the tire size. So what is the general tire sizes on this
monster truck? Yeah, so what defines a fat bike is essentially the width range. Fat bikes start at a
3.8-inch width and they go up to 5 inches. So anywhere between 3.8 and 5 inches is considered
a fat bike. The most common width, I would say, is 4.5, which is what this bike is equipped with.
It's a 26-inch wheel with a 4.5-inch tire. There are also 27.5-inch wheeled fat bikes that have
been trickling into the market. They run the same width. Generally, those are, you know, between 4
and 5 inches in width. Now, one thing to notice, too, is that obviously the rims on my mountain
bike, which I believe these are 37-millimeter internal width, these are significantly wider
as well, right? Yeah, you know, to be able to run a tire of a 4- or 5-inch width, you obviously need
a rim to accommodate that. A 4.5-inch tire on a 30-millimeter rim or even 40-millimeter rim would
handle quite awkwardly. So this fat bike's equipped with an 80-millimeter width rim,
which is pretty common. I would say 90% of fat bikes are equipped with around an 80-millimeter
rim. There's up to 100-millimeter width, which has become less and less common these days.
Nearly every fat bike that comes out is in that 80-millimeter width, give or take a couple of
millimeters. Gotcha. And then you also mentioned this is 26-inch as far as the wheel size. So is
that because the goal of the fat bike is to stay lower so that you're more stable? Well,
it really has to do with the outer diameter. So if you think about this 26-inch diameter,
4.5-width tire, the outer diameter is extremely large. It's approaching the size of some 27.5-
and 29-inch mountain bike tire outer diameters. If we built a 29-inch fat bike, that would be
a very large bike. Now, it does, generally speaking, the bike sits lower, right? It's more
squatted, again, because from my understanding, when you're on the snow, you tend to slide around
a lot more. Again, that low stability is the goal, right? Lower speeds, slippery, uneven surfaces.
Yeah, for sure. And we try to keep a low slung top tube just because you think about the intended
use of a fat bike and generally it being on snow. You're sliding around. You step off the bike onto
the ground. You sink in six inches, eight inches, a foot of snow. Now, all of a sudden, the bike is
underneath you much higher. This bike isn't equipped with a dropper, but it's become more
common on fat bikes because it's really nice to have for mounting and dismounting the bike
in the snow with a bunch of bulky clothes on and overweight boots and blah, blah, blah.
And one other major difference here, obviously, is this is a full suspension bike. There is no
suspension on this. Is that common for a fat bike? Yeah, it's pretty common because if you think
about the pressures we're running these large volume tires at, we're running, you know,
we're running six PSI, five PSI, four PSI. And that's versus like a, you know, 25 to 27 PSI.
Yeah, 20 to 25 PSI on a mountain bike. So this is like added suspension.
Yeah, it gives you some inherent suspension. Snow fills in the bumps, fills in between roots
and rocks. So the trails tend to be a little smoother for winter riding than summer riding.
So you don't necessarily need that suspension. And it's an expense that a lot of folks on fat
bikes don't see value. But they do make them occasionally. I've seen them with a fork.
Yeah, there are fat bike suspension forks. Specifically, there's two or three of them
out there that are pretty common. You don't see them a lot. There's also a couple companies that
make full suspension fat bikes, which is not that common and also more of a nice to have
than a real necessity. Yeah. So generally speaking, I think the last thing I'll note is
typically in a mountain bike, you want some nice hard pack dirt or loam as they call it,
something a hard surface to get your traction and ride, right? Can you just take this bike out in
12 inches of snow, just fresh snow and ride it? Or does it have to be treated a certain way?
You know, taking this out in fresh powder and thinking that you're going to stay on the bike
is an oversight. Yeah. Generally, you need some type of compaction in the snow to be able to ride
this fat bike effectively. I've heard a lot of people that like go out and fresh snow their
first time on a fat bike and they hate it because it's a slog. Well, it's terrible. I mean,
you think about just walking in a foot of snow and how cumbersome it is. Try to ride a bike
regardless of how big the tires are. It's not going to be pleasant. So if you're going to invest
in a fat bike, you probably want to make sure there's some, we call them groomed trails near
you, right? Yeah. Groomed trails or, you know, there are folks that there are multi-use trails
out there in some areas that, you know, people snowshoe and ski on. Back before we had actual
groomed fat bike groomed trails, we used to ride those. I mean, I think that pretty much wraps it
up as far as the basic differences go. Yeah. I mean, I think one last piece would be studded
or unstudded. Fat bike tires, you know, you think about riding in the winter, ice is a factor,
especially in the Northeast. So a lot of type, a lot of fat bikes are equipped with studdable
tires. So this tire does not have studs in it right now, but it's got holes in it to accept studs.
Very similar to car tires that come studdable. So, you know, we offer for bikes like this that
we sell, we offer for folks to purchase studs. We install them. And I tell folks that, you know,
they're riding in the Northeast, you're nearly always going to find an instance where you need
studs. So you might as well just do it. Yeah. All right. So if you want to learn more about
actual fat biking and see what it's really like, there is another video on my channel. I'll put a
link up here somewhere. You can check that guys out. It's me and Matt on an adventure over at
Kingdom Trails on some fat bikes. It's actually really fun. I don't personally own a fat bike
yet. Honestly, I can't afford it and I just haven't gotten into it. I got more into skiing.
I'm assuming you own multiple fat bikes. I have a fat bike. Yeah, I have a fat bike. Cool. So
they both have their purpose, right? For anyone that's just getting into it, I usually recommend
sticking with a standard mountain bike, whether that be for just the gravel roads or for single
track. I think a fat bike is something I typically recommend someone adding as their second bike,
right? I would agree with that. Yeah. Cool. Well, as always, guys, thanks for following along. If
you like the video, make sure you like and subscribe to the channel. We're going to put
up a bunch more of these videos. The subject depth will probably get deeper and deeper.
We're starting with the basics, but we appreciate the support and keep riding, y'all.
Simple bike chat is, that's not what I wanted to say. What did he say? Work them into a super
easy to digest peanut butter and jelly and sandwich. Mind your business. Okay,
we're filming in here. I'm sweating.