BLADESMITHING | Shaping a Knife Handle | Basics

Jason Knight
2 followers
13 Video ViewsยทMar 22, 2023
Today I'm going to show you how to shape a handle,
just like I did in the Elemental Knife.
This is an Elemental Knife, somewhat.
It has a fuller in it.
And we're going to put a handle on it.
Just like that.
And now I'm going to show you how to shape it.
Now, in this, I'm just going to do the work.
I'm not going to sit there and go step-by-step.
If you'd like to see step-by-step, detail-detail,
you have to get the Elemental Knife in the Ford series.
But I'm going to show you the fast-forward way to do this
and the why.
And what I want to do is just help you
make a better knife handle,
but also want to encourage you to invest in your education.
So if you want to learn this,
you want to get better at this, take a class.
Watch the Forge series.
This episode is brought to you by Forged Heritage.
You can go check that out on my Patreon.
All right, let's get busy.
All right, first thing I do, I prep my scales.
So I've got a fuller ground into my handle
and I've also got it ground into my wood.
And the reason for that is when you have epoxy in here,
you want the epoxy to actually do something
besides just sealing out moisture.
So I've got somewhere for the epoxy to go
instead of out of the handle.
That's why I'm doing that, all right?
I've got one glued up already.
Bam.
This is curly maple.
It's got G10 pins.
Let's go shape it.
So this is a 36-grip belt.
I've been using it on my Carta.
It'll work perfect on here.
Put the belt on.
This makes it easy to get it squared up here.
Platen, I don't always use it,
but I don't want a square to platen.
So now what I'm going to do is profile.
And from then on, I'm going to go fast forward.
So there won't be much more talking after that.
I'm going to clean my belt real quick.
I've got this old piece of carbide.
Sometimes you just got to refracture your belt.
So I'm going to use that to refracture this belt,
make it sharp again.
Crazy how that works.
Works, okay.
Yes.
Nice.
I'm going to draw some lines on here for a guide
to show me what I want to take off.
So let me show you how to do that real quick.
I've already marked some lines up top.
I'm just going to continue this
straight on down through here.
Now, I'm going to do a little twist different on this knife.
So just giving myself guidelines.
So this will be a wedge.
I'm just taking that and that off, right?
Do that next.
I hate to change belts, but I'm going to have to.
So this belt is really good for metal at this point.
It's a little too clogged up to use on wood
without wasting a lot of my time.
And I don't want to waste time.
So I got a brand new 36 grit belt.
This one came from Pop's Knife Supply.
Primary supplier is Red Label.
And those are good.
All right.
I've got nice, flat plane, flat plane,
and this is tapering this way, okay?
Now, I'll draw some more lines for you.
I'm going to take these facets off.
All right, now I'm going to switch to a different grit
after I do this.
Okay, I got a 120 from Red Label.
This is a stiff belt.
I'm going to take everything to 120.
So a little different from normal,
but I like it because it's grippy.
It's not uncomfortable.
I've done handles all the way like this,
and I really like the way they work.
Now we do a little hand finishing, and we're done.
So I want to just even this up, make these both even.
The curly maple is one of my favorite handle materials
I like to use outside of that.
I really like stabilized wood.
This is a nice go-to because it's very tough,
very durable, and it's very pretty.
It's not that expensive, and that's a nice thing.
It's like a very renewable resource.
Some of these woods are hard to get new,
you know, like they just, it ain't growing anymore.
So some of them are difficult to find.
This part is always the hard part, getting up in here.
All right, that's not bad.
So because of the type of finish I do on these,
I don't need to go past 220.
And this is handy.
This is the same foam that they use in Kydex,
like a Kydex press for making Kydex sheaths.
So I'm just using that to back my sandpaper here
so I get a nice, even finish.
Better to parkerize these, but I don't have that, so.
We're gonna let that sit for a moment.
Leather dye.
Man, I'm pretty happy with the way that turned out.
That is nice.
Now you know what I'm gonna do?
Would you really like to know?
You know the funny part?
I didn't even know I was gonna do that.
for at least 24 hours just so that the stain is dry
and then I'll do a little bit more finish on it
and then I'll wax it.
All right, so finished with a handle,
finished with a finish on our blade.
Everything worked out just swimmingly.
This is something I've done one other time,
but I like it, it's comfortable, it's different.
And that's it, all I need to do is let this dry
for about 24 hours and then I'll go back
and I'll wax it with the Axe Wax.
So if you like what you're seeing,
if this is helping you, if you enjoy our content,
you can support us on Patreon.
Also, I have a TikTok account,
which is all the behind the scenes shenanigans
and fun stuff.
And don't forget, be a maker, make a difference.
And I'll see you in the next video.
