Secret Compartments!

Popular Woodworking
7 followers
8 Video Views·Mar 10, 2023
Hey, I'm just fine-tuning the finish on the spice box door.
I'm using some 4-0t steel wool to knock the shellac sheen down a little bit, flatten it
out some.
But with the door off, it's a great time to take a look at the inside of the chest and
to look at the drawers and discuss the drawers, and then find those secret compartments.
Now what you see here is a pretty typical layout of the Pennsylvania Spice Box drawers.
You'll notice that small drawers surround a central drawer, and as you move from the
top to the bottom, the drawers graduate in height.
That's, again, fairly typical for a Pennsylvania Spice Box.
Let's take a look at the drawers.
I actually have two different types of construction in this box.
This is a typical small drawer.
The way this was handled, the drawer front is rabbeted, and then the sides and back are
dovetailed into the front, and then you have a small quarter-inch thick piece down here
for the bottom that is applied directly to the drawer box.
That's fairly typical.
So how about that first secret compartment area?
No, it's not in the drawer.
Check this out.
This is the vertical divider, and as I slide it out of the box, you'll see here's two compartments
up on top.
So this is a neat example of how you can put secret drawers in that you can't see or can't
find until you actually pull the unit apart.
So once I put this back in and slide these drawers into position, it's almost impossible
to tell that there's a secret compartment there.
Pretty clever.
Now, if you look at the bottom drawer, the bottom drawer's a little different construction.
It's more what we consider typical work.
The back or the sides and the front are the same width, and then the back steps up.
The drawer bottom slides into grooves that are cut into the drawer sides and the drawer
front, and as the bottom slides in, you'll notice also that there's a nail that holds
it in place.
Typically, this construction was done on larger drawers, and the solid bottom then was allowed
to expand and contract.
It wasn't trapped by the nails as in the smaller units.
So if I put this back into place, we're still looking for another secret compartment, and
check this out.
This is the center drawer.
It's pretty much made the same way.
Again, the drawer bottom is set into grooves in the sides and drawer front, but what's
different here is, I'll pop this out, see if I can get it out.
There we go.
The drawer bottom actually slides out of the way, and with the drawer bottom out, you can
see that there's another compartment in here, and this actually is a false bottom on the
drawer.
So you can put your goods in there, all your paper money, slide the bottom back into position,
and even the false nail makes it look like this is all one unit.
If you opened this up and pulled it out without knowing, you'd never know that there was a
secret compartment there.
So again, a nice layout, a couple of secret compartments, makes this a fun project I think
you'll want to tackle.
