How To Prune Climbing Roses (Winter)

Gardening at 58 North
20 followers
388 Video ViewsยทMar 8, 2023
Hello and welcome to Gardening at 58 North. In this video I'd like to give you a tutorial video
about how to prune climbing roses. So this here is a climbing rose, it's probably about five years old
and climbing roses should be pruned at least once a year but also regularly dead-headed in
summertime. I'll just come around here so you can see a bit more of the structure of the rose.
Now climbing roses are a lot more vigorous than ordinary roses, they'll grow up to 10 meters
or 30 feet for some varieties but most of them will stay a bit smaller than that.
They're very similar to the rambling rose although the rambling roses they tend to have flowering
in a big flush kind of June to July time and then that's them finished flowering for the year
whereas climbing roses when they flower there's not as many flowers on at any one time but they
repeat flower and so they start flowering in June and they flower right through to the frosts
and it's actually January at the moment but this one still actually has some flowering.
So you can see here it's been a bit mild and the walls provide some protection, there is actually
some old flowers here so these would have been open probably back in December time.
Also around here I believe there's a few, you can see that one there trying to open up but generally
the time you want to do the pruning is winter, you want to wait for the the plant to be dormant,
most of the leaves should have fallen off. Sometimes if it's a mild winter or depending
on the variety of rose it might be like this one where it keeps some of the leaves right into
winter so you want to make sure you wait until most of the leaves have fallen off but you don't
want to wait too long otherwise what happens is lots of new growth starts and you want to
cut it before the new growth and the reason you want to cut it in winter is because the plant's
dormant but you can also see the structure a lot better because there's no leaves in the way
and the reason you want to do it dormant is all the energy from the plant most of it's taken back
into the roots at this time of year so if you're doing your pruning you won't weaken the plant
you'll keep it really strong and vigorous and it'll grow back nicely. So you can see here it is
trying to grow it's been a very mild winter so there's a few new growths coming but it's still
got the old it's still got some of the old leaves so sometimes if you have a warm winter it can
start growing before the leaves fall off but generally the leaves fall off first. So when it
comes to pruning a clouding rose it's a little bit different to pruning a normal shrub or bush rose
so the difference with the clouding rose is you keep a lot more of the structure you don't cut
it down as hard and what you're going to is you're going to try and prune it into a shape where
there's enough space between the branches and you want to attach it to any kind of supports or
trellising because clouding roses don't naturally hold on to anything what they do in the wild is
they're scramblers so they scramble on to other plants and shrubs and trees you need to provide
them with a bit of extra support. So there's a few wires here the first one's right at the bottom
but there's no branches to tie in you can see this big branch here that's been tied in in the past
and it's got all these side branches coming off it so what you want to do is try and tie in some
new branches so there's this one here you want to try and tie this in onto a new horizontal support
like that and the reason you want to tie them horizontally is if you have them growing straight
up what happens is the plant has hormones which detects which buds at the top all the energy goes
to this top bud and that top bud just keep growing really fast really tall and just grow lots of
leaves and stems and you won't get many flowers whereas if you pull this the branch down to its
side all the the buds have equal amount of hormone and so all the buds will then grow into
into new shoots and then they will have lots of shorter shoots but these shoots should have lots
of flowers on them so an example of that is this one here this branch has been pulled lower down
all these side shoots have then come out and then they've had lots of flowers on them most of these
ones have been dead-headed throughout the summer and if you do deadhead them they'll keep flowering
again and again so for example this one here you can see when it was cut off they're dead-headed
and then it's grown again and flowered a second time so what you want to do is get nice horizontals
and what i'll do is i'll start some pruning now and get it to a cleaner shape and i'll do a time
lapse so you can see the process to go through what you're looking for when you're doing this
is if there's any dead or damaged bits like this one here you can see it's been been snapped off
and just started to die off you want to cut that back you don't want any dead or dying because
that's not going to help at all it's just going to get in the way other ones you want to cut off
a very small wheat shoots so you see like these here these are never going to come to anything
they're not if they're going to grow at all next year they'll just have leaves or have flowers
they're not strong enough to flower so you want to cut them right off at the base to discourage
them from growing at all and then working along the main main main structure of the the branches
what you want to do is you get all these side branches that have come off from previous years
and you want to cut them back to about a centimeter or a third of an inch
from the uh from the main trunk and that will just allow them to regrow and to put on the same
amount of growth as it did last year um so you want about just a little bit of stump like that
you can go even closer as well um but about a centimeter or something is is good at least you
want to have at least one bud left on the on the stem so it can grow out a new branch so i'm going
to go over this and start cutting back what i'll also look for is any branches that can be tied
down so this one's a good candidate because this one comes off from here and then it comes quite
close to a cable so i can tie that one in other areas like this where it's very congested you
might want to remove branches completely so for example this one growing upright there's not
really anywhere it's tied in because everything around all the other supports are completely tied
up with branches so this doesn't need to be kept so that will be cut right off at the where it
comes from the main stem also if you've got any really old weak growth but you've got a nice new
shoot coming up from the base that's going to replace it then it's often good to remove the
old shoot because what happens is each stem will only live a certain amount of years until it gets
old and then it kind of gives up and a new branch will come up from the base to replace it there's
no examples on this uh rose this year but some years you get a good example of um of a fresh new
shoot coming up so all you would do in that instance is if i take this one for example
imagine this is an old shoot that's quite weak you would remove this one and then if there's a
new fresh one coming up we've had a lot of vigor and energy we'll just take this one for example
even though this one isn't you would just take that and tie it into the structure that this old
one used to take and that just renews the plant you give then it has a few more years of life
and i'll also do this side here this is also a bit of a tangle so there'll be a lot of cutting back
to do there's not as many cables on this side to tie things in and there's a few branches like
this one here which could really be tied in so what i might do is i'll need to get some more
cabling at some point i probably might not be able to fit into this video but i'll tie this down
further there's a few other ones here there's not really many cables on this side so it could do
with some new cables especially up here you can see there's a nice branch there that could be
tied in as a horizontal so when it comes to tying up the branches i would always recommend using
twine something that's quite soft and ideally made out of natural fibers so this one is made out of
which is a natural fiber from a plant the reason for that is it's quite soft so as the plant grows
it shouldn't choke it too much but also these are biodegradable whereas plastic can often
perish so these ones these plastic ones here the sun will perish these and they'll eventually just
turn into fowls and little bits of dust they go into the soil whereas this will rot down
into compost eventually once it went after two or three years also it's good often to put something
like twine on instead of a metal or or plastic because it doesn't last as long and the reason
for that is if you forget about it it's not going to start choking into the the stem and cutting the
the sap supply to the stem it will just wat off and then you just have to re-tie it again it doesn't
mean you have to re-tie it more regularly but it means you don't have to worry about it being
choked off by anything that's been left for too long an example of that is you can see this one
here there's a bit of a gap there where there was a wire choking into it so that's why you don't
want to use a metal ideally or plastic if you can go for a natural fiber and then after two years
two or three years it will rot off and by that time you'll probably find that your trunk is quite
strong you've got good strong stems on it and they might even hold themselves up by that point and if
they don't then you can put something a bit more sturdy on them because these ones don't really
grow much so metal support around a thick stem like this isn't such an issue as if you put a
metal support around a thin stem like this because if it grows then it will cut in now when you're
pruning the rose you want to make sure that you've got a good pair of secateurs so that it leaves a
nice clean cut what you don't want is cuts that look like this which are a bit damaged because
that will let infection and disease come in you want a nice clean cut just like that so you don't
get any infection and the other thing of note to make sure you're wearing some very thick leather
gloves some gloves are going to give you protection because most climbing roses are going to be
covered in thorns like this and these will give you some really nasty cuts you'll quite easily
end up with some thorns stuck in your hand and you'll have to get tweezers to pull them out so
always make sure you're wearing a good pair of thick gloves if you're working with roses
because they easily get cut and scratched so i'll set up the tripod now and give you a time lapse of
me starting to prune it and tidy it into a nicer shape so that's it all now tied off as you can see
it's looking a lot neater this is roughly the size of the pile that's come off of the rose
you can see now there's a lot more space for the plants for the branches to grow in the new year
now there's still a lot of work to be done with this you can see for example there's two here
they come up vertical and don't really go horizontal the plan for these is come spring
it wants to put on new growth i can then train the new growth into the side i'm not sure which one
will go where probably this one will go towards the left that one should hopefully fill towards
the right but i'll just have to wait and see when that grows up same with this here i've got two
and two in this area is really too many so you don't want two coming along the same line so
i'm going to do is see which one has the most vigorous growth going towards the left and i'll
probably keep that one and hopefully it will be this one which is further left already that will
keep growing along this one here can fill up this small space in between the two branches and this
more mature one down the bottom here although it looks really bare now that's quite a strong
vigorous branch that will put on a lot more growth and for example this one that's bent down here
the reason that's been bent down is to try and get a horizontal along this section
so there's a bud just here on the um on the bottom of it that can get trained along the bottom
help to fill some of that level and part of the reason is this one's quite an old weak stem
this is not looking likely that it's going to put on a lot of growth um in next year so that
might die off soon so if this does die off this is kind of an insurance one to kind of back it up
that'll be trained in so that's kind of thing you want to do make sure you've always got um a couple
of other ones ready to replace ones that are looking a bit weak just in case and i'll just
take you around the side now so you can see the difference of the pruned and the unpruned so you
can see it's a lot neater now held back against the wall there's nothing really coming out of the
wall not getting in the way of the pathway i think as you see here this one has got quite a lot this
one does need quite a lot more work as i say it needs new uh supports being put in i'll give this
quick tidy up and i'll show you an after photo and i'll try and get the supports in um possibly
not in this video maybe in a later video and then finally i'll leave you with some photos and
if i've got some video footage of when i pruned this about two or three years ago i did give this
a good prune then and tie it in but the problem was my sound on my microphone wasn't working
so i couldn't use the video footage but i can at least show you some of the clips
without the sound and so you can see how much has grown since then and how pruning it in tight and
neat can really help with the flowering i think you'll also have some photos of this in mid-summer
so you can see what it looks like with some full bloom
