Summertime Heavy Rose Pruning: But Why?

World Of Flowers
199 followers
14 Video Views·Jul 11, 2026
AI Generated·May contain errors
Video Summary
AI GeneratedJason from Fraser Valley Rose Farm explains the four primary reasons for performing heavy summer pruning on roses: propagation, shape correction, disease management, and staging blooms for specific events. He details how the depth of the cut influences the plant's recovery time and future growth.
Hi, it's Jason from Fraser Valley Rose Farm and here I am in the middle of the summer blooming season and I'm chopping down my
Roses sometimes quite dramatically for reasons that might surprise you. So for this video, let's talk about why I'm doing heavy summer pruning
I will go into each of these reasons in detail
But the reason number one and the reason I'm using for this one is because I want to use the plant for propagation
So it takes a heavier prune to get lots of material for cuttings
Reason number two as in this example is it warrants a mid-season correction for shape and size
reason number three is to address a severe pest and disease problem as in this case and
Reason number four the main reason I'm doing it today is to stage blooms for an upcoming event
So by pruning now, I'm hoping to get roses on the right timing later
So let's return to each of these reasons in order number one was because I wanted to use the stems for cuttings the problem with
Traditional summer deadheading, of course is it doesn't produce a lot of wood that would be suitable for cutting
So if I took this stem here and just cut it above the next five leaflet set
All it just gives me is the tip here, which isn't useful for cuttings
So if I'm concerning myself with getting stems for cuttings, I'm actually gonna cut a lot lower
I'm gonna cut way down here and that's gonna give me all of these stems up here
and I'm gonna give you an example here of this one here that goes like this and
I like this section here for cuttings. So I'm gonna go ahead and get like this
Strip off some of those extra leaves and now I have a section for cuttings and that's what I'm going to stick into the trays
I'm gonna get plenty of those off of just this one little section that I've cut off here
And I'm gonna trim down the whole shrub here to get a batch
I'd like to get a full tray of in my case 50
That's gonna decimate the blooms on this rose and that's just a sacrifice that I'm willing to make for this purpose of getting lots of
Stems for cuttings. Don't worry. It'll come back in a few weeks
I'll get lots of blooms off of this yet for the year
But this first batch is designated for my cuttings and just for a little look at my workflow here
what I do when I grab a section like this is I trim off the parts that I'm not going to use for the
cuttings and then do a quick pre-cut into the bin here of the
Possible or eligible sections getting rid of some of the extras. So what I've got a big stem like this
Obviously, I'm not going to use the flowers
So I cut those off and then I can throw that into the bin for later
Processing makes it a little bit easier later on in the house when I'm doing my cuttings if I don't have all of the thick
Stems or flowering ends to take care of those go into the trailer here or the cart
The second reason I gave was about shape and size
Managing that on roses as they go through the season when they get a little bit out of control and you want to do a
Correction I used this one as my example, but to be fair one that gets a misshapen stem like this. That's very easily corrected
Let's look at some other examples as well
My next example here is the very aptly named skyrocket in blooms in big clusters
Explosions of this kind of bloom here
And of course now it's gone through its first flush with second flushes starting to think about happening
Of course, it goes out to about six feet tall six feet wide even on that first flush
So if I want to maintain this in any kind of a good garden shape
I'm gonna have to do a correction after that first flush that should spur on new growth
But in a more contained area and while that previous example skyrocket is fairly flexible in its timing
You could do it now you could do it later
It is important for the old garden roses the once blooming roses that you take care of this now
Just after they're finished their bloom period you can see this one is in fresh hip development here
It's a good time for me to address the shape and size of this one without going too far too hard
I don't want to sacrifice wood for blooming next year
And here's my outcome with a lot of the older bloomed out and more congested stems taken out from the center
Still leaving a good framework of ripening wood for blooming next year
The third reason I gave and this is the example Melody parfum a a rose that appears to be very vulnerable to black spot and
what I'm
anticipating on this one is that I'm going to remove some of the leaves and
Stems to try to give it a bit of a fresh start or a reset against the disease
Maybe it had bad luck this spring worst case scenario
It is just such a vulnerable variety that I have to consider whether to keep it at all
Which is an entirely different conversation, but my first step is usually to give it a reset and give it another try to grow healthy
Timing on this can be a little tricky
You can see there's still some color here, but obviously a bit faded with lots of those
Blooms now completely gone to hips
so this might be a decent time to consider doing the the prune and see as
Some of the upper leaves may be a little bit healthy. You can see down low
It's completely stricken and has indeed dropped a whole bunch of
Spotted leaves right around the base of the rose where it's going to reinfect upwards
Now you certainly could consider leaving these blooms and especially these buds on just to enjoy the flower as well
You can before you do this big prune
But since I have the pruners clean in my hands that I'm doing this kind of work already
I'm gonna do the next step where I cut it down
Just to some fresh young stems a handful of them and that's gonna take off all the foliage
I also may come back afterwards and blow it out the tire area down below here from getting rid of all those old leaves and
Debris that have dropped down from the rose. So I'm sending it forward clean
the fourth and final reason I talked about at the top of the video for the heavy pruning during summer was
For me to impact the timing of the rebloom. This is kind of a tricky one
I have an event coming up at the end of August
And so I know from experience here that if I do a heavy prune for any of those reasons whether I'm addressing shape and size
whether I'm taking it for
Propagation whether I'm doing it for the health of the plant that if I do it
It takes about eight weeks for it to bounce back into full growth again and to give me some more blooms
So what I've done out there to synchronize this is I've made some judgment calls on that for those roses
then I needed the wood for
Propagation that I needed to cut down the shape and size and address that or if they weren't doing that
Well health-wise about a week ago. I started with all of my heavy pruning and I'm gonna give you some examples of that
Some of them are bouncing back from that already
You can see some fresh shoots coming as we approach the event in the next seven weeks six weeks
I'm gonna do additional pruning now if something is in bloom right now and looking quite good for shape and size
I'm gonna leave it for now
But I might address it somewhere in the range of four or five weeks in front of the event just to give it a more
Even deadheading and try to synchronize it up with the other ones that I want blooming now
I'm not gonna get this right in all cases. Some roses are a little bit faster
So I might delay it on the miniature roses
Some roses are a little bit slower and are gonna miss me entirely no matter what I do at this point
but what I am gonna do is I'm gonna keep it in mind that the depth of the pruning is going to result in the
Quickness of the plant to return to bloom
So again, the deeper into old wood you go the more likely it's gonna be around eight weeks and that may vary by your climate
We have long days here
And if you do a very light pruning it
Sorry medium deadheading you might be five or six weeks
and if you do a very light pruning or trimming you might be able to get it to return to flower or not even pause and
Give you a rebloom within the range of two to three weeks if you haven't taken off some of the freshest wood
So I'm what I'm trying to do right now is selectively go through there and look at the condition size and health of the plants
And those that need it the most get it now and the ones that need it a little bit less of a fine-tune
They get it a little bit later and I'm gonna try to stage it up to that event. I'll see how that goes
Alright, thanks so much for watching this video on why you would do heavy pruning during the summer
If you have any questions, please drop those down below in the comments and I'll see what I can do to help
