DIY BOHO Home Decor Ideas | Aesthetic Decor on the Budget | Clay Bead Garland

Bohemian Decorate
25 followers
5 Video ViewsยทFeb 25, 2023
Hello everyone my name is Angelica and welcome to my channel. I hope you are all doing great.
For today's video I've prepared three super quick and easy home decor projects for boho style
lovers and if you are into this interior style I also created a playlist with all my boho related
videos. I will leave the link to it in the description box so you can go and check it
out after this video is finished. Today's projects are also budget friendly and super trendy something
where you can see all over the Pinterest and Instagram and doing them by yourself you save
a lot of money so less talking more crafting. Let's start with the first project.
To create my garland I will be using polymer clay in white gold but I'm sure air dry clay would
work as good. I take small piece of this clay and create a roll which I'm dividing into equal parts.
Of course the size of your clay bits depends on your preferences. Now each of this part I roll
between my hands into ball shape. Polymer clay is quite hard but after contact with the warmth
of your hand it becomes slightly softer and easier to work with. I try to roll it on the table but the
result wasn't as good so I stick to rolling it with my hands. Amount of the balls depends on the length
of garland you want to create. I take piece of paper and grind black pepper over it. I've used
this technique in one of my previous projects and you like it so I decided to use it again.
Then I take clay ball and roll it slightly on the top of the paper. Because this clay is quite
stickable it easily takes all the ground pepper from the paper. Then I roll it between my hands
again to push this texture more into the clay. And I repeat the process with all of my clay balls
adding more ground pepper on the paper from time to time. Now they are all nicely covered. I take
some pointy tool and start creating the hole in the middle of each ball. The best kind of tool you
can use would be some thin straw or something what actually cuts the hole out instead pushing
the clay on the sides like in my case. It works fine but it slightly changed the round shape so
I have to roll it again between my hands. Once all balls have hole I place them on the baking tray
with baking paper and make sure they don't touch each other. And I place them to the oven for 30
minutes at 110 Celsius degrees. After baking and cooling down they are nice and hard. It's time to
attach them to the hemp yarn. To make this process quicker and easier I take some thin wire which
will work as my needle and help me to push the yarn through each hole. I cut long enough piece of yarn
for all my clay beads. At the end I'm making double knot to stop the first bead. I'm making this
knot few centimeters away from the actual end. Between each bead I'm going to create double knot
which will hold the beads in place and also add more details to this garland.
Once all beads are added on the yarn I'm going to create two tassels. One on each end of the
garland. You can connect two ends together creating kind of necklace but I've decided to keep them
separately. I take few pieces of yarn and fold them in half. Then I take the end of the garland
and connect it all together. And to create my tassel I'm using a gathering knot. I cut the
excess yarn and then create another tassel on the other end. Really cute piece for decorating your
bookshelves or table. Easy and quick to do and as I said before you can use azure clay instead of
polymer clay. To decorate my one pound round mirror I will be using wooden skewers which I found in
barbecue section for one pound as well. And to cut them I will be using wire cutters.
I also drew design of the mirror I'm going to create to help me using right lengths of the
wooden sticks. As my drawing shows I'm starting with the longest parts. For the sticking part I'm
using the flat end of the wooden stick. I cut it slightly shorter and attach it to the back of the
mirror with hot glue. I measure the length of the whole stick and the outstanding part and then I
transfer these measurements onto new stick which will go on opposite side. Then I glue another
stick halfway between the long ones and this one is actually half length of the previous ones.
Then following my design I attach more and more sticks all around the mirror. Each stick is
shorter than the previous one and I also try to keep the same distance between the stick so it
looks tighter and more professional. Half of the mirror is done and the other half I'm starting
the same way. From the longest stick all around to the shortest. To be able to hang this mirror
on the wall I create a little loop which I attach at the back of the mirror with fair amount of glue.
To cover the whole back of the mirror I cut out a round piece of cardboard and glue it.
To add more bohemian touch I took cotton rope which I interlace between the sticks.
I've made two ropes each one starting from different side.
I'm really happy how this mirror turned out. It's really unique shape and eye-catching.
For the base of my tray I will be using cardboard. I take some round shape item and draw the perfect
shape on this cardboard. Then using sharp scissors I cut the shape out. Try not to bend the cardboard
if possible. Using ruler I find the center of this circle and this will be the point where I start
gluing my rope. I'm using quite thick rope so the whole tray will be more stable and it also take
less time to glue it down. I glue small section at the time making sure the rope stick nicely to the
bottom and also covers the whole surface. Once the whole circle is covered I cut the rope and
glue it on the side of the previous row. I go around with the scissors to cut off any excess
cardboard. To create the size of the tray I will be using wooden rings which are actually curtains
rings. I just remove the metal loops from them and then again using hot glue I attach one ring at the
time in standing position. You don't need plenty of glue small amount keeps the ring nice and steady.
I only glue them to the bottom I don't stick rings together. I draw another circle but this time it
will be only as wide as tooth thickness of the cord and I cut out the middle part. This part will
create the top edge of my tray. Then I glue two rows of the cord around the circle. Because my
cardboard was green on one side I had to make sure to cut off the visible parts of it and then I
attach it to the rest of my tray by gluing it to each ring. Super affordable way to create decorative
tray combination of cotton cord and wooden rings gives a really boho vibe to it. Let me know in the
comment section which project is your favorite and overall if you enjoyed this video please click
the like button and subscribe to my channel. It helps pushing this video to more audience and it
helps this channel growing. And if you are interested to see more DIY home decor projects
in different style just leave the comment down below. And for now thank you so much for watching
your support and I will see you in my next video!
