How to Make an Adjustable Silverware Tray | I Like To Make Stuff

I Like To Make Stuff
23 followers
4 Video Views·Feb 8, 2023
Hey I'm Bob and I like to make stuff. Today we're going to make a modular silverware tray.
One thing that's always kind of frustrated me in the kitchen is that the plastic tray that all the
silverware goes in never fits in the drawer. So instead of using that thing from now on I decided
to make a custom one that fits in our specific drawer to hold our specific silverware. This is
my actual silverware drawer from my kitchen. I brought it down to my shop and you can see what
I mean. This plastic container is way smaller than the rest of the drawer. So I want to take
this stuff that we use on a daily basis and make it easy to get to but also have some storage for
the stuff that we don't use quite as often. I'm going to take advantage of the height of this
drawer as well because this thing is way shorter. So we're actually going to make this into a two
tier thing. We're going to make one that slides across the top with the daily use stuff and then
a section at the bottom that's broken up to house all of the other things and keep them mostly hidden
away when we don't need them. All right let's talk material. Obviously you could use whatever
material you have on hand for this type of a project. It's not going to be structural, it
doesn't need to hold a lot of weight. I decided to actually use some pre-cut quarter inch sheets
of poplar. Now I picked poplar because I kind of like the way it looks. I haven't used it in a while.
It's really lightweight and it has a huge variation. This stuff is pretty white. It almost looks like
maple. This piece is green. There's actually some pieces that have purple in them. There's a whole
bunch of variation in poplar that may be what you want for a project but it may not as well. Just
keep it in mind when you're looking through these boards they may have different colors in them. I
got these quarter inch sheets because there's not going to be a whole lot of room in here. I don't
want to waste space with really thick material. But if you started with a three quarter inch piece
you could always sand it down to the thickness that you wanted or re-saw it with a bandsaw to
actually make two pieces from one three quarter inch piece. But since I'm starting with these
quarter inch pieces I don't have to worry about thinning them out. I just need to cut them down
to the right size. Let's do that now. So for the first piece I'm actually not going to cut these
down yet. I'm going to glue these two thin pieces up into a panel and this is going to be the bottom
of the top tray that's going to slide back and forth. I'm going to go ahead and glue these up
so that this can be drying while we cut everything else down. I've got those clamped on the bottom
but anytime you're doing a panel like this especially if it's really thin material like
this is you want to make sure to clamp it from both sides so that it doesn't have a bow in it
when it dries. The material I'm using is pretty thin so making a box with just butt joints probably
wouldn't be very strong. So instead I'm going to connect these with finger joints. That cuts a
groove in the end of each one of these pieces so that they will fit together like your fingers.
You can make a simple jig. You can use a regular saw blade to do that but I have a nice jig that
I'm going to use that uses a dado stack. You don't have to have a jig like this to do the same type
of cut but the cool thing about this one is that it's variable so you can use it for all different
size of fingers with different size material. I've got it set up with a quarter inch dado blade on
here so it's going to cut a quarter inch slot and then I'm going to set up the jig to match that
same size. It's really important when you're doing finger joints to do a lot of test cuts to make
sure you get a nice tight fit. The front side of those cuts look great and I wanted to make a point
here because the back side actually doesn't look very good. This jig has a big opening where the
blade goes through and that causes a lot of tear out on the back side of these cuts. Now that may
not be a big deal if this is on the inside or you don't ever see it but if it is a big deal if you
need clean cuts on both sides make sure to put a backer board against the back side of these pieces
before you cut the fingers. I got my test finger joints done and they fit really nicely so now it's
time to cut down the final pieces to their length so that we can make the boxes. One cool thing
about using finger joints is that you can actually cut all your pieces to the exact size of the sides
of the box. That may sound obvious but if you're making a butt jointed box you have to cut the side
pieces a little bit shorter to fit them on the inside of the top and the bottom pieces. If you're
doing a finger joint you actually don't have to cut them any shorter because those pieces cross
over and go all the way the length in both directions. Anyway that just means that you don't
have to take out the thickness of the material from two sides. I've got these ready to go together in
the box but before I glue them up I need to cut some more slots in the top and the bottom piece.
This is going to be the daily use tray so I need a bunch of different sections that run down here
for normal stuff that we use every single day. So I'm going to take the top and the bottom piece
and run them over the dado stack again to put a small dado subdivided all the way across here so
we can put in some pieces to connect the top and the bottom. Then on the bigger bottom tray instead
of just putting it into a big box we're going to put a divider around here so we can have a big
open section at the top and then some adjustable dividers on this side so I need to add dados
to these two pieces as well. Now I've got those cut and I can start putting this box together
but I did actually make the blade a little bit too high. Those cuts are way too tall and the
material is way too thin. Once it's all glued up it should be plenty strong but I just have to make
sure to be careful when assembling this that I don't crack one of these pieces. I can't quite get
these to seat all the way just by banging on it and I don't want to end up breaking this piece.
I'm going to use a clamp to kind of squeeze these two faces that are opposite each other
together to hopefully close that gap. This video is sponsored by NordVPN which is a service that
I've personally been using for quite a while now. Anytime I travel I'm always a little bit worried
about connecting to wi-fi networks that I'm not familiar with. Anytime I'm in a hotel or on an
airplane it just freaks me out a little bit and to make sure that I'm safe I use NordVPN. Go check
it out at nordvpn.com slash I like to make stuff and if you use the code I like to make stuff you
get 75% off a three-year plan plus an extra month. They've got unlimited bandwidth plus you can have
six simultaneous connections so you can have multiple devices protected all the time. One of
the other cool things about having a VPN is that you can mask your location so if there's a video
service or something that you want to see that it's not available in your location all you got
to do is go to the app select where you want to be on a map and you're good to go. NordVPN is very
cool and a great way to safeguard your data. If you want to check it out go to nordvpn.com slash
I like to make stuff and use the code I like to make stuff to get 75% off a three-year plan plus
a free month. And it's risk free so you got 30 days to try it out and if you don't want it you
can get your money back. Thanks NordVPN. I've got the outer box glued together now I've got to put
in this internal divider. This is going to fit right down in here it's just going to sit in
between the two outside pieces because honestly I forgot to put in a dado for it right there.
But it'll be glued it should be all right we're going to put this spacer piece all the way against
the back wall and then slide this back against that spacer to make sure that it's the same
distance from these corners. I've also got these one two three blocks these are really handy if
you don't have any and you can get them pretty cheaply on Amazon. They're a good way to hold
things in position just because of their weight and their squareness and that will keep those
pieces square to the outside edges while the glue dries. If you've got a glue line like this that
you need to get rid of on a panel you can use a big paint scraper, you can use a sander, or you
can use a card scraper. This is something that I've only recently started using and it's really handy
and you don't have a whole lot of dust. Now I'm just going to lay this tray on top of this piece
and just trace the outside. I didn't plan to put a dado or a rabbet on the inside of the bottom of
this frame to inset that piece because I didn't want to lose the height. I need the height here
for all of the silverware to sit in so this bottom piece is just going to be glued to the underside
of this frame. That was kind of a rough cut on the outside of this piece it doesn't have to be
perfectly sized yet because after I get the frame glued onto the top of it I'm going to run it along
the sander to make sure that these outside edges are all nice and flush including the end of all
the finger joints. All right I've got this piece cut as a test I'm going to trim it down a little
bit just a hair to get it to fit in there and once I get this one perfectly fit then I'll make
the rest of them exactly the same size. I've got all those pieces cut down these are going to be
glued into the top tray the daily use tray and these are actually just going to be set down
inside these slots and I only made four of them even though there's actually seven different
positions. These are going to be adjustable so as we put different things down here and have
different needs we can move these left and right to make the gaps bigger or smaller. So the only
thing left here is to glue these pieces into place and then sand and finish this entire thing.
It was at about this point when I realized that I forgot to do something and luckily the glue
was not dried on these center dividers so I could take them out. Before we glue these in place I'm
going to cut a little notch in all of them at the same time so that you can reach in with your
fingers and they don't hit the upper side so we're just going to cut a little area out here.
I've mentioned this before but I don't typically keep a thin blade on my saw I keep a three quarter
inch blade on here which is not very good for making tight turns. If you want to make more
intricate curves you need to have a smaller blade on here or use something like a scroll saw but in
this case I don't have a specific curve that I'm trying to hit so just to smooth this out I'm going
to use the end of the belt sander just to get a nice even curve. You may notice that I didn't do
this curve on the end one and that's because it's the biggest area and you won't have any trouble
getting your hand down into that section but some of these thinner ones that curve will help you
actually grab a single knife or a single fork that's down at the bottom. And you'll notice down
in here there is some glue squeeze out in the bottom but instead of smearing that around I'm
going to let it dry like that because a big glob is easier to pop out and you won't have to sand
off as much. So the glue is all dried on this part I used a chisel to get rid of that extra squeeze
out of the glue on the corners so this thing is ready for finish. Now for finish I'm going to use
a beeswax and mineral oil mixture. This is one that somebody sent to me I've never used it before
so we're going to try it out. This serves a couple of purposes. One it's food safe so that should be
good because there's going to be silverware in touch with this but also it's going to make these
pieces of wood slide together easily. But even then if they don't slide as well as I would like them
to I can always go back and put some paste wax on the parts where they're going to touch to make
them slide even easier. I've got finished on these pieces so now I'm ready to put them in place. I did
not put a bottom on this bottom section because the drawer already has a bottom so there's no reason
to put another piece of wood and eat up some of the height that we have inside the drawer.
So I'll put down a piece of contact paper on the bottom of this drawer so let's go ahead and put
these pieces in place. So there it is it's a very simple project that's going to make a pretty big
difference in our kitchen every single day. Of course you can customize it to fit your specific
drawers in your kitchen. Using the finger joints to make boxes is a really good method to get a nice
strong joint on the corners and like I mentioned before you don't have to have a specialized finger
joint jig you can make one very simply and you can use just a regular table saw blade or a router.
I would love to know if you learned some new stuff from this video and if you did please let me know
down in the comments. Hearing back from you is going to help us make these videos better and
better. If you want to check out some other types of projects we've got all sorts so be sure to check
those out and if you're not subscribed please go ahead and do that as well. That's it for this one
guys thanks for watching see you next time. It looked like your face was out of focus let's try
I'll try to refocus it and then this is a variable finger point finger point a modular
silverware tray that's perfect yeah first try
