Making Moiraine's Dress Using Only Third Age Sewing Methods | The Wheel of Time

Clothe Haute
164 followers
151 Video Views·Feb 7, 2023
Thus began this wholly impulsive reconstruction attempt of
Moraine's white tower gown, as seen in the new Wheel of Time TV series.
The writer of the original Wheel of Time TV series, Robert Jordan,
has at some point stated that the technology of the world
is relatively based in late 17th century technology by our present standards.
You know what this means, friends.
We shall be reconstructing this entire gown using only late 17th century sewing methods,
so we're not using sewing machines.
It's going to be entirely hand-sewn.
Why don't we track the hours it takes for me to actually put together the real dress,
so not including the time that I've spent developing the actual pattern of the gown.
Let's see how long it would hypothetically take.
A dressmaker in third age tarvallon, how long would it take them to make a gown like this?
The fabric that I'm using for this project is a heavyweight duchess satin,
which is the closest thing that I could find in color and apparent weight to that of the
original gown. For some additional structure and as a lining layer,
I'm using this medium weight silk taffeta,
which is flatlined individually to each powder fabric piece before the bodice is stitched together.
This is not how modern dress linings tend to work,
which are instead made up separately from the outer dress pieces and then stitched in,
but historically flatlining was the more common method since it allows each piece of the garment
to take on the structure of the lining layer instead of each layer sort of floating independently
of one another. In order to ensure that both layers stay firmly in place and don't shift
around or warp before they can be stitched together,
I'm just running a few rows of basting down the center of the layered pieces,
ensuring that things are exactly where they need to be before I secure them.
This will help to avoid any bubbling after the pieces are stitched together,
if in the event they are stitched slightly out of alignment.
These pieces are not basted around the edges though,
and the pad stitching is staying about half an inch clear of all outer seams,
so the basting thread doesn't interfere with the next step.
I have finished marking out all of my pieces. I've got all the flatlining pieces basted
onto the silk layers. This is just from the moment I began cutting out last night
to marking out to thread marking, all that fun stuff.
We have been going for three and a half hours so far.
The bodice is going to be put together with a technique that was very common
well into the 18th century, by English stitching the pieces together.
This method is a very quick way to produce a very strong seam,
since both the outer fabric and the lining fabric are stitched and finished at once,
so no additional seam finishing is needed later. Bonus.
Each piece is first prepared by tucking the seam allowance of both the outer
and lining layers inward,
making sure that any curved edges are first clipped to allow for a smooth fold.
These are then basted down to secure them temporarily.
The center back edge, however, is going to have gasp, an invisible zipper.
I know, I am mildly scandalized myself,
but apparently these are canonically accurate to third age dressmaking,
according to the TV series.
Since the world of the series is theoretically set in the future,
it is entirely possible, I rationalize,
that invisible zips remain one of the precious few items
carried over from the Age of Legends.
So in the spirit of celebrating ages past,
and because our methods here are nothing if not borderline unhinged,
this section will be presented to you in Age of Legends old tongue.
So
now to put together the rest of the bodice pieces,
which is done with aforementioned English stitch.
This is worked closely to the edge so that when opened and pressed, the edges of this fabric will
This was definitely a process and ended up requiring a few trials and many more errors.
This first attempt involved making up the curved shape I drafted in part one according to the
bottom curve edge of the bodice. I also cut out two layers of cotton batting to use as the padding
and ensured that one of these layers was stitched into the outer seam itself in the hopes of avoiding
crumpling where the padding didn't quite reach the edge of the pocket. That didn't end up turning
out the greatest. There was still no insignificant amount of crumpling along the edges as the pad
stretched along the curve, which probably meant that there was a more fundamental grainline issue
going on with the pattern piece itself. So I did the only sensible thing and put that part down for
a minute to finish up the rest of the bodice, namely by doing up the shoulder seams so that
the collar and the sleeves can go on. Psst! By the way, if you haven't heard the news, I have written
a book on these historical hand sewing methods if you are looking for some more tips and practical
step-by-step guides. It's now available for pre-order and links to that are in the description
if you wish to go and have a peek. Friends, I have just ordered this from B&J Fabrics in New York
and it's just arrived. This was a sort of test yardage of something that I could potentially
use for the bolero and I actually think I really love this. The texture is a little bit more
textury than what she's got and of course this doesn't really have that leathery shine. It's got
a little bit of a luster to it, but not like leather obviously. So it is a different thing, but
the color is really, I think, going to be good with this. It's that slightly darker blue with a little
bit of texture. I think we can work with this, so I'm going to try and work with this. But anyway,
that is all a matter for later. For now, I'm pad stitching a layer of tailor's canvas to the lining
layer of the collar, molding it into that curved shape it'll need to sit smoothly around the neck.
The bodice bit fits, which is what I wanted to make sure of before I proceeded on to the more
complex bits of the sleeves and the hip rolls. I have just made a grievous error. So what I did
not take into account when I was dreaming pretty things about narratively significant lining colors
is that you will see the inside of this as it walks, which is very unlike canonical Maureen,
who is very good at keeping her own secrets. So what I'm going to do in regards to this situation,
because I do actually have a long strip at the bottom of what I'm pleating up to use in the
amount of length that the full length of the yardage gives me, I'm going to probably take
a bit of that and I will piece it if I have to, but it's just the lining, so it won't matter.
I'm going to have to lay in another layer of lining in here. Thankfully, I do have enough
to do that. I can't believe I didn't think about this. Back to trying to solve the hip pad dilemma
again by repositioning them, turning them back to front, adding more stuffing, but no solution
was to be found yet. So I ventured off to make up the sleeves. The sleeves on this dress are
arguably the reason why this impulse project came into being in the first place, namely those
little gusset piecing things at the shoulder, which I found so irresistibly intriguing that
I just absolutely wanted to try them out for myself. This is probably the most complex sleeve
I have ever attempted, not just because of the shoulder configuration, but the entire sleeve
is also made up of three individual sleeve panels. So each sleeve has five pieces to it,
and with two sleeves, each also including a lining layer, means that the entirety of this dress
includes 20 individual pattern shapes that need to be cut out to make up all of the sleeves. That
is a little bit insane. I'm treating this like you would treat a gusset and stitching the insert
pieces onto each side of the main sleeve panels before seaming the entire sleeve together for the
neatest seam finish. Side note, I don't know if this was intentional on part of the costume team
or not, but I very much appreciate the subtle Flame of Sarvalon slash potential dragon's fang
happening with these pattern pieces. Maybe that is why these clever shoulder seams appear on so
many of the Aes Sedai, or maybe they just like very nicely fitted shoulders. Maybe the Flame of
Sarvalon was actually adopted to represent the dire importance of neat shoulder fits in the White
just to make things a little bit easier before that final seam is stitched up to close the sleeve.
The lining, which was made up in exactly the same way, is then inserted into the sleeve. Lining this
in stiff silk taffeta was a very good decision, since the flare down at the cuff will need
something to help hold it out and stop it from collapsing in on itself, and this lining does
just the trick. The sleeves are put in with a backstitch, which is crucial. Backstitching is
one of the strongest stitches, and sleeves need to take a lot of strain, so these seams need to be
very nice and durable. A lot of dressmaking seaming in historical garments is not done with
backstitching, because it does take a lot longer to do than, say, a running stitch. And you know,
time is money. Time has always been money. But backstitching must especially be used for seams
that do need to take strain, such as arms' eyes. There is one final task I can accomplish in my
hip pad procrastination mission, and that is hunting down a replacement for the skirt fabric
which I didn't quite have enough yardage of. So the shop that I bought the satin for the gown in
is actually kind of a chain shop that have different locations around London, so I just
went to one of the other locations, which is more, like, fashion fabric focused and, uh, tailoring
menswear. They didn't have more of the satin, unfortunately, but they did have something
very visually quality-wise similar to- actually more similar to what she's got in the actual image.
So I just went and purchased that. Hopefully it's a lot- well, it's a different quality of fabric
entirely, but it's a lot lighter weight, so I'm hoping it will be okay. Incidentally, I was just
going back through some footage of the original episode, and it looks like the skirt fabric is
really light, like, she gathers it up and just sort of, like, floats away in it, um, so this actually
might end up being okay, but we'll see. I have the sinking suspicion that I've done funky things with
the grain lines and that this is actually not supposed to be shaped like this at all. I have a
feeling that this is actually supposed to be a lot straighter, but we're gonna get to that in a bit.
Basically, what I'm struggling with is when this is going around on the dress, we're getting a lot
of this sort of puckering at the edges here. No matter how much stuffing I try and put way deep
into the crease here, it is not solving the issue. So that leads me to believe that this is a grain
line issue, and the way that the fabric is curved is not allowing it to sort of roll smoothly down
the edge of the bodice. So what I think I'm going to do is I'm going to go back to the drawing board
and go back to my original plan of doing some paper sculpture on the dress form, see if I can
but what I'm going to do now is I'm going to take this off the form. I might true up the lines a
little bit just to make sure everything's nice and smooth, and then I'll go ahead and cut out a shape
of this in coutil, which is basically a very, very stiff, very tightly woven cotton, and it is very
good for stiffening things. And I think I'm going to try and sculpt at least a top layer of this
around the coutil so that it has the shape, and then I'll get to padding it, and then I'll line
it finally after that. So this is going to be a bit of a process, but let's go ahead and at least
get the coutil shape of this cut so that I can put that on the form and see if the woven fabric
behaves differently from the paper. Okay, good. This will absolutely work. This is definitely
looking much, much better than what I had before. Next step now is of course to go ahead and start
making them up. I'm going to cut out fabric layers of this, as well as probably some cotton padding
layers, just to see if we can do a bit of that fluffy effect that she looks like she's got in
the image. Just point out my mistake was indeed to do with grainline. Instead of having it be an
inverted curve like I initially drafted it to be, it is actually, this bit is actually on the
straight grain, and this straight grain against the curve of the waist is actually what makes
it flare out, which makes so much sense now. All right, I have spent a glorious day trial and
erroring this new configuration for the hip pad, and I think I have finally solved it. As you can
see, this is looking so much better than what I was doing before. I've got the coutil layer on the
bottom, so it creates a little shelf, I suppose, if you will, and then a couple of layers of padding
just in the top to give it that fluff. It is already starting to curve. It is curving smoothly
and without any puckering at the side here, so I'm quite satisfied with how this is turning out,
and I will go ahead and make up another one so that we can attach these. So I've got two layers
of my fabric. I've got one layer of the coutil, and I've got three layers of the cotton. I'm just
basting down first on the inner edge where the hip pad is going to attach to the garment,
just ever so slightly. I've cut the coutil a little bit wider than the actual seam line so
that I can just ever so slightly baste this down so that this will just stick firmly into place,
and it won't slip or move anywhere. This, of course, I'm just doing with a running stitch
since it doesn't need to be super strong. There's going to be plenty of other stitching going on
here. In theory, you could use a fusible interfacing for this purpose. On the upper top side, I am just
placing my three layers of cotton. One I'm placing actually in the seam line, one I'm placing
slightly above the seam line, where the top edge of the cotton will actually get pinned down into
the seam when I go to stitch it to the dress. I'm doing this so that I don't end up with a very
harsh ridge where there is suddenly no padding in between the seam and the garment. The third layer
of cotton is just once again laying straight on top within the seam line just to finish out,
give it a nice smooth shape on top. The outer seam allowance edge of the bottom coutil piece is just
getting pressed very tightly around the coutil so that that edge is just very flat and very nice and
out of the way, so that I can just take this layer and now lay it delicately over top of the other
top padded layer. This I'm offsetting slightly so that this folded seam edge is going to be
on the underside of the hip pad and not directly on the edge where it is more likely to be seen,
and then of course this just gets filled into place. This is in all likelihood not the method
that was used when they were actually making this costume. They were probably not hand sewing this,
they were probably stitching it inside out and then flipping it, but this is the more likely
17th century historical method, so this is naturally the method that I'm going for
in my interpretation of this dress. The successfully finished hip pads are attached
to the bodice by stitching just the top layer down, then turning in the seam allowance of the
underlayer and felling that into place to fully enclose all the raw edges.
Take a minute to discuss the skirt situation. This is the length of the new fabric that has
been doubled up. When working with fabrics, generally you want the straight grain,
which is the grain that runs along the selvedge, the warp, to be running along the vertical of
the body just because that is the stronger grain. So in order to have enough width to go around the
waist, I need three lengths of fabric effectively. I'm going to cut this here and then just basically
do the same cartridge pleating technique that I did on that as this. This is an organza-ish
fabric. I don't really know how to describe it. It's not transparent, it's opaque, but it's got
that springiness that an organza has. So the cutting of this is going to be an absolute
nightmare. As you can see, lightweight silks in general, they don't like to sit nicely.
In my subsequent research since starting this gown, Amazon have put out a little behind-the-scenes,
a two-part behind-the-scenes on the making of the costumes for Wheel of Time, and it gave us a
little bit of insight into the different cultures, fictional cultures, I should say.
Moraine is from Kairian, from what we can see in the research inspiration. The Kairianans love
their tie-dye, but that actually answers the question of what was going on with the lower
half of her dress where it looks sort of modeled, I guess. The fabric has been treated in some sort
white. I'm quite excited because the texture of this fabric actually gives a very similar effect
to that sort of vertically streaky. It doesn't have the color variation that tie-dyeing would
have, but I think it's still a nice little homage to the original costume. I'm not about to get into
dyeing right now because I just don't feel like it. Just an interesting point. I'm hypothesizing
that the skirt is done with cartridge pleating, which very nicely tracks with the 17th century
inspiration since cartridge pleating is pretty much the skirt gathering method from the 16th
all the way up through the 17th and even into the 18th centuries. I'm just marking out regular
points along the top edge of my fabric, each a quarter of an inch apart and two rows spaced
three quarters of an inch apart. It's very important in cartridge pleating to have your threads as
precisely placed as possible to get the neatest folds. These marks are then used to guide the
basting threads, which are then drawn up to form rows of neatly folded fabric. I'm doing this across
all three panels of the skirt fabric I have, loosely securing the top edge with pins so that
I can stitch the panels together into a complete skirt. It turns out I didn't have quite enough
yardage of the new fabric to include as significant a train as Maureen has in the show, but that excess
length did exist on the one panel of the original skirt satin that I have left over. So against my
initial plan to have the satin panel at the front, I decided to put this at the back and let the two
newer shorter panels happen at the front, which isn't the biggest deal in the world. The fabric
change will just be a little bit more noticeable from the front instead of the back. The skirt is
seamed together with a combination stitch, which is a running stitch punctuated every so often with
the security of a backstitch. Historically, long skirt seams such as these were just running stitch
to save on time since they aren't meant to take any strain, and the fact that these panels are
sewn selvedge to selvedge means that there won't be any additional seam finishing to do after.
The skirt is attached to the bodice by ensuring that every fold of the cartridge pleats is secured
individually to the bodice with a whip stitch. This took positively forever, but cartridge pleated
skirts can be quite dense and heavy, so lots of secure stitches are necessary to keep it in place.
And thus we have the base of a dress. The results of my hours tracking are as follows.
Not including the patterning and prototyping and mock-upping stage, the actual physical hand
stitching of the base layer of this dress at least totaled up to 77 hours, which is not the worst.
I have definitely done hand-sewn historical reconstructions that have taken significantly
longer, but to be fair this was a relatively simple dress in terms of cut and number of
panels and pieces to be sewn together. The springiness of the replacement organza-like
fabric means that the skirt is a bit fuller than the one in the show just because it wants to
spring out and have a bit more body than the heavier satin would, but there is not much to be
done about that. In the end it was the weight of the original satin but the color of the replacement
that combined would have made the most accurate fabric, but I can't feel too bad about that given
my previous hunting across all of London for the right fabric. I do feel like I ended up with the
closest options available, at least at the time of making this. But of course she isn't quite done
yet. Ah yes, the part of the project I have been absolutely unequivocally and mortally dreading.
Moraine isn't Moraine without her iconic shoulder piece and that is going to be an entire adventure
in and of itself. So I shall see you with that anon. This video has been brought to you by HelloFresh,
the meal kit delivery service I have personally been using for a few years now. It's been such an
excellent way to get fresh home-cooked meals very efficiently by eliminating grocery shopping and
the pre-portioned ingredients means less prep time and less food wastage. Personally I love to order
additional servings per box so that I could cook up a big meal all at once and save the leftovers
for future lunches or dinners. There are so many delicious options to choose from every week but I
am under strict instruction to choose the meals with maximum fresh veg. His lordship will not hear
of it otherwise. Speaking of sweet furry valentines, HelloFresh would like to remind you that you can
avoid overpriced restaurants and human interaction by eating at home this valentine's day with a
delicious three-course meal featuring a shared starter as well as sides and of course dessert.
Whether your goals this year are to start cooking more, to find lower or higher calorie recipes,
or to explore new recipes altogether, HelloFresh has got you covered. Go to hellofresh.com and
use code BERNADETTEBANNER16 for up to 16 free meals and three surprise gifts.
