This week we made this super easy and inexpensive rustic DIY Blanket Ladder. We used a couple of random tools to beat up the new wood a bit to make it look aged and reclaimed. Layered some stain and paint, gave it a sand... BAM! Elevated Blankets!
We show you a super simple way to add an awesome aged texture to wood to give it that old, distressed, weathered look of barn wood, pallet wood, etc. We'll also show you a couple of finishing ideas to make the wood grain and distress marks pop even more.
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
We just made this six foot tall blanket ladder
for 15 bucks in about two hours and we used a bunch of crazy tools.
You gotta see what I did with this bike chain and we'll show you how we did it right now.
What is up? Welcome back. Do you like to do it, build it, or make it? So do we and we do it every
week. This week we're making a ladder for some blankets. A blanket ladder. They're too short.
You need to get a little higher. It's a decorative accent and we're going to put it in our family
room and we're going to make the blanket in a separate video. We're making the blanket next week.
Can't wait. Step one. We're going to gather all of our supplies. This one was a really easy
shopping list too. We just needed two six foot one by fours and an eight foot one by four
with some paints or stains. Whatever you want to use. Step two. Now we're going to make all of our
cuts. Our cuts are real easy. We're just making four 20 inch planks. Super easy.
I'm going to use my little speed square to keep my saw straight.
Step three. Now we're going to assemble it. We're just going to use some glue
and a one and a quarter inch brad. Set the top rung eight and a half inches down
and then 11 inches for each one after that.
I'm using the speed square to square up the boards to make sure the rest will be straight.
All right. There's our ladder. That's what we got so far.
Step four. Now we're going to beat it up. We're going to distress it. We got a bunch of weapons.
I mean tools. We got a bike chain, a hammer, a drill bit. My little poker tool. Cricket poker
tool. A cricket poker tool. A screwdriver. A screw. Now we're just going to kind of hit it.
Make some butterflies. The hammer like they missed the nail.
And they're horrible at nailing everything. Oh, that was pretty cool.
It did more damage than I thought it was going to do.
I like it though. It looks good. Do it again like, but a different angle. Oh,
yeah. There you go. I like it.
It's a serious gouge. Okay. No, I was thinking like that. Can I do a couple over there?
Yep. Like that. Just making some more holes.
Okay. Next step would be just to slightly sand any gouged areas that might be sticking up so
that this doesn't give you a splinter or something. All the distressing we need. That's what we got
so far. Step five. This is where we get into the meat of it. This is where we do our staining
and painting. We did some experimenting. And by we, I mean Kim did some experimenting.
So I thought I would show you because I came up with three different boards with very different
techniques and looks to them. But I actually like them all. But we're going to obviously
narrow it down to one. So for this one, if you can zoom in and see that up close.
This is the Andy Sloan French linen paint that we've been using lately with this dark wax,
this bare dark antique wax over it. Makes it look dirty. Well, I don't think it looks dirty. I think
it looks like a cool antique color. He thinks obviously he thinks that that one looks dirty.
It's dirty. All right. So this board actually started with this light trellis gray. So
Bayer offers a chalk paint. We just got this at Home Depot and had it started with the white base
and had them tinted this really light trellis gray. And then I added the dark wax onto this one
and it gave it a really neat color and look. Yeah, I like that.
And then the third board has two options on it or two techniques on it.
First, I stained the stain, the whole board, Jacobine, Jacobian, whatever, whatever. And
then on half of it, the top half here, I added white wax over top of the stain and gave it kind
of a grayish. I don't know. Hey, is it like I like how that wax get caught in the. Yeah,
I left the gouges are more white. I do. I like that, too. And then the bottom half,
I started with the Jacobian stain and added the trellis gray paint on top and then just
sanded it and distressed it. But I didn't really let that stain dry very long. I didn't let it dry
for hours. I really let it dry for probably 10 minutes before I added the paint and let the paint
dry and just started sanding it. So I did the whole thing in like 15 minutes. And I think that's
the look we're going to go with. I think we're going to try to do the bottom one again. Top
one looks cool just with the wax, but I think the bottom one looks like rustic and worn and
that's the look I like. All right. So if that's what we're going with, then we're going to start
with some dark stain. Now, after I told you I use Jacobian on my test piece,
I don't have enough Jacobian. We are we are out. We are running low. We are down to nothing.
So we're going to use this Kona and I think it's going to give us pretty much the same look.
Nobody freak out. It's going to give us the same look.
All right. All right. You want to stand and I'll wipe. Okay. Well, it's going to set for a minute,
I guess. Yeah, I guess we can get like half of it done. You can wipe it and I can start on the
deal. You want to touch it? Seems okay. All right. We just went over it with the heat gun for a
minute and now we're going to paint it. Right here. We're going to use this bear chalk paint
in this trellis gray. And we're not going to get crazy with the paint. We don't want to get in all
that distressing that we've already done. We do want to kind of paint it. Paint it normally. Don't
try to goop it in there. All right. That's what we got so far. Almost done. Looks like a really
bad paint job, but I think after we distress it, you'll see the beauty. We'll give it five minutes
to dry. Yep. Just want to dry enough to touch. Step six. Now we're going to give it a little
more distressing with the sandpaper. We let it dry for like 15 minutes. Do you want to show them
up close? See if you can show them what the paint really looks like. So it's not perfectly painted.
It's just like I said, a bad paint job for right now. Yeah. Who does the bad paint jobs now, Kim?
What is this? 120. A little 120. A little 60. All right. That's what we got.
Not too bad, huh? Only took a couple of minutes. We got ourselves a new ladder for our blankets.
So I'm so pleased. It's going to look so nice.
We are all ready to do final shots and intro, and Kim decided that it needs a stencil.
I don't think it needs a little stencil right here. It's going to look great.
So we were done. Just five minutes, babe. It'll take five minutes. Back on. Back at it.
Step eight.
Step eight, we're going to add a stencil. So I'm using the Cricut app right from my phone.
I couldn't find a good font, so I just downloaded an SVG off the web, imported it in here. I decided
I wanted it about 12 and a half inches wide, so we're going to have to use this long mat.
I selected vinyl, and now we can press the flashing go button.
You didn't quite get it lined up with the grid.
I was down. I was in. Okay, so we weeded it and put our transfer tape on it,
so now we're just going to add it to the front of our ladder. We're just going to hit it with
a little bit of Mod Podge to seal it so it doesn't bleed when we paint it. Hit me with a
little bit of that white Waverly. So it's my idea to put the stencil on, but he's going to do all
the work. Yeah. I just thought you wanted to keep pissing. See, wasn't that worth it? That
money. Now we got to make a big chunky blanket for next week. Right? It needs screaming,
I need a chunky blanket. If you guys like this week's project, hit that like button. If you're
not yet subscribed, we do this every week or something like it. Until next week, why don't
you guys check out a video right here or maybe Kim's video. The other one, they're pretty sweet.
We'll see you guys next week.