#sambelbotol4 Cara Memasang Segel Botol Sambel Supaya Tidak Rembes

Foozzt Do'food
956 followers
#sambelbotol4 Cara Memasang Segel Botol Sambel Supaya Tidak Rembes
Then prepare a bottle that is already filled with chili sauce and make sure that the edges or ends of the bottle are dry, not oiled. So after you put in the chili sauce, you can wipe it with a clean tissue or sterile cloth.
After that, prepare a cloth iron that we set with maximum heat. After it is hot, we take the chili sauce or the bottle of chili sauce, we put the seal on top, we assume that the top covers the entire area, so it fits in the middle of the bottle.
Then we glue a little like this, and we make sure again that the position of the seal is right, then we turn it, we glue it like this.
We turn the iron until the end of the bottle is printed, visible inside or on top of the seal. It looks printed, the edges or lips of the bottle are printed, we glue it, then we press it again.
We test, if it is doubtful, it can be removed and then glued again.
If there is a bulge like this, we iron it again so that the air can't get into the bottle.
The characteristics that are already tight, the bottle will be like this.
Then after we finish, we close it, then we give our chili sauce label.
I'll show you again how to take the bottle of chili sauce, we put it on the top of the bottle, we glue a little until it sticks, we make sure that the position covers the entire lips of the bottle, then we turn it, we turn it like this.
Until it looks printed, visible from the top, the lips of the bottle are circularly printed like this.
The other characteristics that are already tight are when we press it like this, it will bulge a little, then in this calculation it will flatten like this.
In one or two seconds, it will flatten.
Because it's hot, if we press it, it will bulge, in three seconds it will flatten.
I repeat again, this is a sign that the bottle is already tight.
Then we close it with the outer lid and we give our brand label.
To make it clearer, I repeat again, take the bottle of chili sauce, make sure the outer lips are dry, free of oil.
Also around it can be wiped with dry tissue or other sterile material.
Which is really clean.
Then we put the aluminum foil on the circle of the lips of the bottle.
We glue a little, then we turn it.
Turn until the circle of the lips of the bottle is printed on the surface of the seal.
If there are cracks on the outside, at the end, it is not even.
When we are even, we make sure the air does not come out.
We press.
The features that have been sealed well, bulging in seconds, flattening.
If there is something like this, doubt, to make sure we seal it again.
If there is something that is not even, we seal it again.
We make sure it's neat.
Then we close.
This is already curved.
We close.
If doubt, we repeat again.
Especially if the client is outside the city.
If it's already bulging like this, then flattening, it means it's neat.
In addition, to make sure that the condition of the sambal is still good,
try to pack it with bubble plastic.
Or wrapped in newspaper.
As if we are sending a broken item.
So that if there is a bump, when the expedition brings our product to the customer,
our sambal is still neat.
Because this is from plastic, even though from plastic, there is also a risk of breaking.
The area of this glue, the connection of the bottle, sometimes if it is bumped, it breaks.
So friends, in addition to making sure that the seal is tight,
also the packaging when sending it must be paid attention to.
I usually use, in addition to newspaper, I also cover it with leaves.
Or if we go to GNA, for example, they provide a special layer of bubble plastic,
which will secure our sambal so that it does not break.
The point is, it must be done as if we are sending a broken item.
To ensure that there is no bump, especially if we have started to send our sambal abroad.
Well friends, that was the tips on how we put the seal on our bottle of sambal.
Hopefully useful.
Happy online business.
Thank you.
Salam kuliner manyos.
