Before I knew what stacking was I would experience stacking in my bows. I did not know why it was happening, I just knew that something was wrong with my bow. With the knowledge of what stacking is and why it happens allows me to be a better archer and boyer. Stacking is due to string angle alone. If the string angle gets near to 90 degrees stacking will start to occur. At this point, if you are drawing a bow you know that the bow is about to break. It is a spine-chilling feeling when you hit the wall of the bows maximum draw length and you know at any moment the bow you are holding in your hands may just shatter. At the same time, this is what makes archery so fun. If there was no risk or intensity in bowmaking then there would not be the same level of rewording that we get as bowyers and archers. I hope you enjoy this video, I think I may do some more how-to videos in the future rather than just terminology. If you like these basics videos let me know. If you would prefer a video step by step how "to make your first bow." Let me know! Or if you like the style of "The smallest bow ever" https://www.youtube.com/watch?v=OIiL9KQSML0 Let me know!
Have you ever wondered why I say bow making basics, and then when I get into it, it doesn't seem that basic?
I wonder the same thing.
Today we're talking about stacking. What it is, and why it's important.
Stacking is simply when the string angle to the bow bends beyond 90 degrees. Let me show you.
I've got the limb of the board bending up here on the tooling board, and we can see it's not even near what stacking would be.
We're getting much closer.
At like 70 degrees.
And so stacking is going to be the point where the string bends beyond 90 or near 90.
And if that occurs, if the string bends to here, the bow limb quits bending back and starts bending more down.
And what happens is the bow breaks at that point. You can see as I pull the bow back, it's coming back.
But then there's a point where it starts to bend just down, and that's the point you want to watch out for in the bow
might break. Now, how do you prevent that?
You may be able to reflex the limbs back this way and cause the limb to bend more here, which will prevent stacking.
It used to be said that stacking occurs because the fibers on the wood begin to stack and then the bow breaks.
Well, that's not the truth at all. It's very different. Stacking doesn't occur because the fibers.
It is purely to the string angle and pulling the wood in a specific direction.
Because if I were to reflex this bow, I could draw it back further,
but the middle of the limb would be bending even more than it used to, and the bow still wouldn't break.
It is purely due to string angle, not due to the bend in the limb. Stack is due to string angle alone, and
you've got to ask the question, why is this important to us?
Well, if our string angle gets to 90 or beyond 90, our bow is going to break.
And so as we're making a bow, designing a bow, tillering a bow,
we need to think about how we can prevent that from happening.
The shorter the bow, the more likely that's going to happen because there's less limb to bend.
So if we're making a shorter bow and still want to draw it a long distance, we really need to think about
recurving or reflexing the tips. Now, if we do that, we need to pay attention to what kind of bow wood we're using, and we may
need to reinforce the back with sinew or something that is better under the forces of
tension than just normal wood would be. I'm really not trying to make stacking very complicated.
It is just having the string angle go beyond 90 degrees, and when that happens, we have to consider
whether we need to reflex the limbs or not,
depending on how far you want your draw length.
It can be almost to the point of stacking, and you're good with your draw length right there,
and so you're good with the bow. It might shoot smooth and good to go.
But it's really good to understand these
concepts so that we can understand what's happening to the bow when we feel the effect of stacking
in our bow making and in our bow shooting. If you learned something and enjoyed the video you guys know what to do,
I hope you guys are learning more about bow making along with me so that we can enjoy this craft more and make better,
faster, more accurate shooting bows. Go have a wonderful day.