Keel Repair - Coleman Canoe (HPDE)

Northern Scavenger
130 followers
13 Video Views·Apr 30, 2018
This method was used for an HDPE bodied canoe but may work on other materials. UPDATE: After 2 years of medium use, the JB weld chipped off and the boat started leaking again.
Materials:
JB Weld Plastic Bonder
Coarse-Grained Sand Paper
Gorilla Tape
The Shop: http://www.northernscavenger.com/shop/
Hey what's going on this is Noah from Northern Scavenger and today I'm going to be repairing
a fracture on the bottom of my plastic Coleman canoe. About two weeks ago I was paddling with
my girlfriend at a local lake and we noticed the canoe started filling up with water so we pulled
ashore. I flipped it and saw that there was about an inch and a half to two inch fracture right on
the keel right underneath the bow. Some of you guys may know the Coleman's been with us for years
so I'm not really ready to get rid of it even though it is a pretty terrible canoe so I'm
gonna do what I can to repair it and get it back out on the water as soon as possible.
Plastic Coleman canoes are made out of an HDPE which is a high density polyethylene.
What it is it's a chemically resistant plastic and unlike Kevlar, ABS and other sort of material used
for making canoes you can't really bond epoxies and silicones that easily and I didn't really
know how to fix this thing so I actually reached out to you guys on Facebook and you gave me a
bunch of great recommendations. Based on my time and material I'm going to be trying a JB weld.
You can pick it up from your local Canadian Tire or Home Depot. Before I do that I'm going to start
with sanding down the plastic around it so it bonds properly with this coarse grained sandpaper
and if that doesn't work I'm going to be layering the ---- out of it with Gorilla Tape. So the first
thing I have to do is dismantle the foam block that's in the front part of the canoe so we're
going to go do that right now. You can see the damage is right in there. So when you're doing
these sort of repairs you want to make sure your boat is nice and clean so I'm going to take some
time to clean it out and let it dry before I do the application and the sanding. So I washed off
what I could on both sides now I'm going to get a rough sandpaper and scrape off and make a rough
surface for the bond to take. You can see it's all fresh now and ready to get the application of the
glue. I'm going to be mixing the plastic bonder part A and part B and applying it to the inside
of the canoe. All right so I would say that's mixed thoroughly. So now that the inside and
outside are both cleaned out and sandpapered I grabbed a piece of wood and I put it underneath
the canoe to have the area that has the crack on it suspended so I ended up adding a pretty hefty
amount. I'm thinking it's not going to hurt to add three times as much as you need so I just
kind of added it like a caulking and just spread it on with the popsicle stick. So about an hour
after I coated the inside I coated the outside and then I waited about an hour or two from there
and now both the inside and outside are hard as a rock. So what I'm going to do is sandpaper the
outside to make this nice and smooth and flush with the canoe but on the inside I'm just going
to leave it how it is. So I think just for security I'm going to use some Gorilla Tape and really give
that a second coat of security right there. Definitely doesn't look that appealing but you
know what? I think it's going to work. Just another battle scar. Hey Bria, what do you think?
She's repping her Northern Scavenger buff. You can find these buffs on our website.
Great for people, great for dogs, can't go wrong. Alright guys that's a wrap. I hope you enjoyed the
video. This is all experimental. I do not know if it's going to work. Comment below if you have any
future ideas of how you can repair a plastic Coleman canoe. Make sure to like the video and
subscribe to Northern Scavenger for fresh content every once in a while. See you in a few.
