Easy Woodworking Projects You Can DIY

Family Handyman
185 followers
175 Video Views·Dec 30, 2022
Hi, I'm Brad with Family Handyman.
Woodworking is a really fun hobby, but if you're just getting started, don't worry.
You don't need a big shop with a whole bunch of expensive tools to start making some cool
stuff.
Like this wine rack.
All the tools you need for that are right here.
Let me show you how it's done.
Start by cutting a 45 degree miter at the end of the 2x4.
Measure 13 inches from the long end and clamp a stop board to the miter saw's fence for
the remaining cuts.
You can cut as many parts as you like.
Our rack has three.
Mark and drill bottleneck holes using a 1 1⁄4 inch Forstner bit with a sacrificial
board underneath to prevent blowout.
Tape the end miters together, then glue the ends, drill pilot holes, and fasten the parts
together with 2 1⁄2 inch screws.
Trace the keyhole hangers on the joints, positioned so that they'll be vertical once mounted.
Drill 1⁄8 inch deep holes using a 5 1⁄8 inch Forstner bit to create the arced ends
of the recesses.
Chisel out the waste between the two holes, apply a finish of your choice, and let the
rack dry.
And then drill a 3 1⁄8 inch deep hole with the same bit in between the other holes for
screw clearance.
Fasten the keyhole hangers into the recesses.
Dunk the corner braces and screws in a cup of gun blue until they turn black.
Screw the braces onto the edges of both joints and then hang the rack.
So that's it.
Here it is.
Simple.
For more projects like this and other easy woodworking projects, check us out at FamilyHandyman.com.
