This Video Is Different! The process of making a 54" with 7 layers of fiberglass tape has been quite awesome! The Osage bow is turning much better than I thought it ever would.
Hey guys, we are back for another video about this bow. Now, this is a bow with all those
knots on the back of it. We shaved those down. It had a crack in the middle of the limb. We put
seven layers of fiberglass tape on it. We started to put a cool leather wrap on it. I think it looks
pretty good. I can't decide if I'm going to redo it or not. I decided I'm not going to settle for
less on this bow though, so I'll probably redo it. This is actually the first leather handle I have
done, so I need to practice and I need to get better because I don't even really know how to
leather work, but it feels good to have a leather handle. Anyway, the profile of this bow, I really
like the skinny handle, arrow rest, kicks back up. Now, this bow is 56 inches long. I'm drawing it
out. Put this up real quick. So, I'm drawing it nearly back to my 30 inch draw length.
I want to put on the tillering board. I've got it sanded to 220, so it's pretty smooth.
We're going to throw it on the tillering board, finish up the final tweaky tweaky tillering parts
of this bow. Then, I am going to do the leather handle. We'll make a string
and we'll finish this bow up. I'm kind of done settling for crappy work. I really want to make
really, really good stuff. I'm still in the very beginning process of bow making and each bow I'm
making is getting better and better, so this one's been exciting. This one's fun, especially because
I thought it was a piece of trash, but now it's working and it might be my favorite bow yet. So,
let's get right to this. To the tillering board. 16 inches, 20 inch draw. It's 23 and a half.
For some reason, it's scary to go beyond that on the tillering board. It's probably because it's
so hard to pull back. 24 inches. All right. How does it look? It's interesting because I find
when you look from different sides, you see it differently, but what I see is I really like the
way this limb's bending here, but it looks like this limb is bending more. This is the upper limb.
Let's exercise it a second. There's 24 inches right there. I'm going to throw a straight edge
on this to see what it looks like. We've graduated from a sharpie to a pencil because a pencil will
leave not as deep marks and you don't have to remove as much wood when you're this close on
the end. I like to rub my straight edge along this and you can see where the gap gets bigger.
Wherever the gap gets bigger, that means it's bending more, so you want to leave that wood and
take off the wood around it. So, the gap's the biggest right there. It's really consistent all
the way down on that limb besides there. Maybe a tad. It's going to be right there. Let's see
how the rest of the limb does before we mark. Man, I'm really pleased with how this is looking.
Pretty consistent. We have a two-inch section right there we're going to mark up and then here
on the other limb, you know what? It hinges almost right there. Not a hinge, but it's just bending a
little more and then it evens out and then a little more. So, it's another two-inch section
right there and it's pretty stinking consistent. There's one more section right there. You want
to take your time with this process and just double check everything. Take some off there.
Not there. A little off there. Boom. Just like so. We'll take some 220. You can see where we
marked it up right here and down here and I'll just hit that. Once the pencil line is gone,
I'll hit it another 20 times and I mark that two-inch area, but I'm going to
focus on that two-inch area, but I'm not going to dig a hole. I'm going to feather it out,
just like so. Then on this limb, same thing. Beautiful. Time to exercise the limbs. Two,
three, four. Pulling it back probably about 26 inches. Five, six, seven, eight, nine,
10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 25. I'll generally do 25.
Tillering board in. Let's take another peek. Oh, baby. There's 24 inches. Down to 26.
Can it be done? If this was a sinew-backed bow, I'd go ahead and draw this back to 30 inches,
but since it's only 50, how long is this bow? Let's check. Knock to knock is 54.
54 inches knock to knock. That's a pretty short bow for a 30-inch draw. Wow. Now, I'm not...
You see that? I'm almost to my cheek. I need to make sure it's not about to start stacking,
and that's what it feels like. If I go to a 24-inch... Here, let me show you. I'm at 24 inches
here. See that? This limb is almost at 90 degrees. Almost. I've had bows break when you just hit 90,
sometimes even a little bit after, but normally when you hit it. This limb, it's not as close.
Do you know why? It's not as close to 90 degrees because this was the limb I was able to reflex a
little more, but this limb on this side, I wasn't able to reflex as much because that's the one
that was cracking because it was so brittle. Now, what I should have done in the first place with a
piece of wood this old is to heat this up by steam and bend it that way. Then, it will have moisture
put to the wood temporarily so that it wouldn't have done that, and I would be able to draw this
back further right now. So, if I draw any further, it might break due to stacking, but the fiberglass
is holding up really well, and it's not like if I had a normal bow with one growth ring,
and I drew it back to the point of stacking, it's going to break anyway. So, the fiberglass is
holding its own at least as good as one growth ring would do on the back of a bow. So, I think
I'm going to give this bow to my wife. So, I might want to make it a little weaker. How do you make
it weaker? Let me show you. To make this bow weaker, I'm just going to use the 220 sandpaper.
How I'm going to do that since I want to... Man, how much do I want?
You know, I think it's better to have less poundage than more for a beginner especially,
and my wife's a beginner with a traditional bow she shot compound. So, what I'm going to do is
I'm going to take a sharpie, as painful as it is, paint this whole side. What this is going to do
is it's going to allow me to consistently remove off wood off the whole limb since I like the
tiller. If I color in everything, then by the time I get through all the sharpie and how deep it
bleeds, I'm going to have removed wood evenly throughout the whole limb, and that's what I want
since I like the tiller, and I just want to make this bow a little bit weaker for my wife.
The other option to remove wood consistently would be just to count the amount of times
you sand. So, you could go 1, 2, 3, 4, 5, 6, or however you want to do it,
to 100 or so, and that would be equal to taking off the sharpie, and that's another way to do it
if you don't want to take the time to rub on the sharpie. The only problem with that is
your pressure may change depending on what part of the limb you're pushing,
and if your pressure changes, then you're going to take more wood off one spot or another.
With the sharpie, you can see, oh man, it's coming off fast over here, so I must be really light up
here, so then you can even it out. But, if you are extremely skilled with your sandpaper pressure,
feel free to not sharpie your bow. And all right, we have finished that round,
and we have already done the torture test. 25 pulls, okay, and then we put it on the
tillering board here. The tiller still looks good. There's 26-inch draw right there.
So, let's see what our poundage is at. I'm assuming my wife has a 24-inch draw. I'm not sure.
25 pounds at 24 inches. That's still kind of heavy.
That's smooth. Okay, still a little heavy. I'm going to try to get that down to 20 pounds.
So, we're at 25 pounds. Time for some more standing. Time to exercise those limbs.
30. All right, there's 26 inches. No problem. Last time, we were at 25 pounds.
I just sanded it with 220 for about 30 seconds on each limb. Let's see if that did anything.
24. It says 26 pounds. We went up a pound. All right, well, we're going to need to take some
wood off. All right, done sanding. Let's give it another shot. Now, if any of you guys have
been following, have you seen that last bow I made for my wife? I liked it so much, I kept it
because it could draw my draw length, and it shoots so good.
And since it shot so good, it was a little too powerful for her. You can probably tell from that
video that she was having a hard time giving a good release. So, I was like, I'll make her another
one. So, that's why I'm making this one for her rather than for me or somebody else.
So, all right, there we go. 23, 22. You know, that may be right right there. I had it at 35.
She could get it back, but it wasn't easy. So, how's it look?
I'm telling you, I'm drawing that past 28 probably. So, guys, it's been a little different
style of video here. Wow, look at that. I'm close to my cheek. My cheek would be 30.
You know what? I just did it. See, like, if the bow is going to break, it's going to be now. So,
just pay close attention. 54-inch bow, seven layers of fiberglass tape, 30-inch draw length.
Now, that's awesome. Wow, it is like seeing you. That's crazy. Something's going to want
to kill me because I said that. It's performing really stinking well, though.
Goodness gracious. Wow. Anyway, what I was saying is that...
What was I saying? Oh, this video has been different. Thanks for joining me. That's pretty
cool. 30 inches, 54-inch long bow, seven layers of fiberglass tape from a broken bow to something
that works really well. So, I appreciate you guys being here. And the next video, we're going to
finish this. We're going to make this awesome. Like, when you put the finish on it, the wood
comes alive. I'm going to put a different handle on it because this one is okay and I want to do
something great. And then I'm going to put a string on it. And this is going to be my best bow. So,
enjoy the rest of your day.