Here is a free course featuring Brent Roth about different ways to set up rappels through a canyon. This considers ease of rigging, abrasion, ease of rescue and how efficient it is to move people through the canyon. Episodes 1-5 show the systems, Episode 6 shows how it can all be done with 1 device, Episodes 7-8 are friction tests, Episodes 9-10 are break tests of the hardware and the knot blocks. All the episodes are in the textbook
Welcome to our Canyon Corset,
where this is one video of many videos
that cover canyon rope systems with Brent Roth here
in the Pacific Northwest, who likes canyoning.
And we want to talk about the different devices
that you can use in a twin, isolated, releasable system.
Nailed it.
Because there are a lot of different devices
and a lot of different ways and things,
and it's what you said the most.
I think it's the one system
that I've seen the most different ways to rig.
And the thing is, why you would want to pick each one.
Doing this course with him,
I now could probably replicate almost everything in it
if I were to be tested.
But if I went down a canyon,
I wouldn't really know which one to use for a situation yet.
I have book knowledge, not experience.
But why would I use a joker,
which is two eights opposing each other up here,
versus the camp lowering device.
Oboe.
So we're going to show you that in this video
where we have the line scale three here.
We're going to measure in pounds of force.
We're going to use freedom units
because there's going to be,
it's under two or 300 pounds of force
in order to get this to move.
I don't want to be dealing with 0.5, 0.6 kilonewtons.
And we got to pick pounds or kilograms and it's America.
So don't get hung up on the units of measurement.
Get hung up on the difference
between this being a hundred pounds
and then this being 300 pounds.
Brent loves tinkering and he made a mechanical disadvantage.
And so we have a fixed point here on the bottom
and it's going through a pulley.
So we can basically step in this
and generate more force than we even weigh.
But we're going to try to pull this as slowly as possible
and see when it starts to start coming undone
and releasing without anybody hanging on
to the end of the rope.
Because in your isolated, twin isolated,
releasable systems, you have to tend to the other side
or be mindful of it.
Yep, exactly.
And we're not going to be mindful about it.
Nope.
We want to find out how much friction
each device giving us.
And I would kind of consider that the higher friction,
the safer it could be in the event
that somebody lets go of this.
Like how much do I need to pay attention to it?
That's all it is.
But the higher friction, if you need to lower somebody,
the harder it could be to give them the slack they need.
There are a couple of reasons they might need slack
is you need the rope longer
because you want the rope just right above the water level.
So you're not swimming with the rope.
Rescuing, indirect rescue, is that what you call it?
Yep.
Indirect rescue, so if I'm stuck in the water going,
and you can just lower me out of my problem.
Can you do that again?
And then the other reason you would want
to lower somebody is abrasion.
Yep.
So if something's rubbing, you can move that point
so it's not just rubbing on the same spot the whole time.
Correct.
So the first system we have here is a Joker
and it's rigged up to where I have
the same friction on both side.
Notice that this saran entered in this side
and came out and this one came from the back.
And that's because there's two devices here
that are stacked, it gives you a different space here.
So we're going to try this mode first
and see what the friction is
and then flip it the other way
and see how much of a difference it is.
So let's go ahead and pull this one.
Use your mechanical disadvantage.
All right, choke up on that.
And we're slipping.
But you're in the upper 200s.
Yeah.
220, 230.
220, 220, 200, two.
Okay, here we go.
240, 230, 220.
Let's flip these into the other friction mode
and find out if that's higher or lower.
Right, okay.
Oh, it's more friction.
This is taking a bit more.
And you're barely moving.
Oh, it takes 300 before you start moving.
Yeah, so there's definitely a difference.
And where are you putting the strands through?
30.
So I'm dropping.
You are moving, you are moving.
Ready?
Yeah.
Here we go.
Wow, it's, it's.
Oh, I'm on a roll now.
It's in the 300 range.
It's almost.
Yeah, here we go.
Okay, so that took maybe 20, 30% more.
Yep.
Having it go through, I guess,
with, how would you describe this?
The eight that's on top are facing out.
The rope that I'm gonna put on that eight,
I'm coming from the backside and through.
That's the higher friction mode.
Yep.
And then the eight that's in the back,
this is the rope that's gonna go on the eight in the back.
I'm going through the front.
Towards the back.
Towards the back, around that.
And that was the higher friction mode.
This is an eight millimeter rope.
8.7.
8.7 with a Dyneema sheath,
which is a very slippery material.
Yeah.
So if you're using a higher friction rope,
a nine, what, 9.5 Tegnora rope,
that's just, you're gonna want different stuff.
That's why.
If you have lighter people, heavier people.
Yeah, that's why the number is pretty irrelevant
and it's just there for comparison.
Or the unit of measurement.
Yes.
Is irrelevant.
But we still need the comments in there that say,
why are you using pounds?
How much force was that?
Campovo, put some mechanical disadvantage on that.
We're already moving.
At around 130, 140 pounds.
It's also going through the ring,
so there's additional friction.
150, 150.
Seems to be pretty consistent.
So this is half of the fast version.
You would have to tend this because I'm 160 pounds
and if I'm rappelling with my full weight,
that'll put on 160 pounds.
If I'm not rappelling smoothly,
I can generate more force,
but it's for short peaks.
So you would want to hang onto that
or I would slip and fall.
Exactly.
And once I start moving, I'm gonna keep moving.
In theory, like I said again,
with all of these systems, you want to maintain.
You always want to maintain.
Maintain the other strand
or it needs to be in somebody's rappel device.
But I've always been curious of like,
how careful do you have to be?
How much of a difference?
What's really walking on thin ice versus block ice?
Because the high friction mode and the joker mode,
I'm not 300 pounds.
Right.
Okay.
Oh, oh, look at you.
An extra carabiner.
Well, yeah, yeah, yeah, yeah.
120 to 160 was before.
We're definitely over 200.
You're at 260 right now.
Yep.
Get that leg workout, bud.
You got this.
Mechanical disadvantage.
Here we go.
Yeah, 250, 260.
120 to 160.
Yeah.
To 260.
Yeah, so you can see what's happening
just like when we threaded the joker system
in opposite direction.
Yeah.
Putting a tighter bend radius into something.
That's all I did.
You see, I've made that rope.
Stick out further.
Yep, stick out further on both sides.
And it increased significantly.
So if you found you didn't like that
with the first person going down,
you could just throw in another carabiner.
Or a bigger person's coming and you're like,
you can adjust it on the spot.
Yep, yep.
Or they got a pack on or whatever.
Make sure you go check out the website.
Brent has written a textbook
that corresponds with this course.
What's great about making these
stand-alone YouTube videos
is they're more likely to be found.
So 10,000 or even 30,000 people
are gonna benefit from this information,
which gets us really excited.
Instead of trying to charge for the course
where you're only gonna get one or 200 people
to maybe pay for it.
So by being able to do this on a shoestring budget,
whereas Brent has donated all of his time,
Andrea has spent days filming for us,
and I have edited all these videos myself,
we're able to make it super, super cheap.
But it does cost money to make
and we basically need only 1% of the audience
to either donate $1 per episode on Patreon
or buy gear on ExtremeGear.org,
which supports us 10% with whatever you buy.
And they do sell Canyon gear as well now.
As a thank you to my Patreons,
I give them early access to these videos in this course,
whereas they come out once a week
until they are fully released.
We hope you benefit from the content.
Nice shirt change.
Yeah, I had to strip off a layer
because I'm the one doing all the work here.
The leg presses are getting to you.
So what do we have here?
The totem.
Yeah, so the totem, same configuration.
I'm just curious to see how much of a difference it is
because like I said, in all of these devices,
even though they appear to have the same features,
like the holes in here might not be the same length,
the same width.
Yeah, actually the holes are about one third shorter.
Yeah, so I'm gonna say right now
we're gonna get higher friction than what we did initially.
And if I even can get another carabiner in there,
it's definitely possibly too much.
I think this will produce different results.
Oh, now we go, now we're going.
220, 220, 250, 220, 220, 230, 240, 220, ready.
Okay, okay, 240, 260, 240, 240.
Okay, there we go.
This being shorter, adds significantly more friction.
Yeah, the space in the slots.
Because it's not just gradually
going around the carabiner,
it's sharply going around the carabiner.
Let's give it a go.
I'm also using this.
Do you need a leg pump?
Are you getting tired?
I might do it.
Not moving.
We're gonna have to go with the multiplier.
We're gonna have to use some...
Totem with two carabiners.
I totem.
You are not even moving.
There it is.
So you move around 370 pounds.
Now, if you do have too much friction,
I saw you adjusting this,
you can feed this through.
Yep, just pulling this strand up.
And once you get this slack,
then you're down, then I could even just
easily pull that.
Exactly, because obviously I don't,
sometimes I want the rope to move
when, if it's an abrasion issue,
I don't want to rely on the repeller pulling the rope.
So I'm feeding that in,
but I want to be careful not to just create
a ton of slack, because if in that moment
that person goes, like...
They'd go down.
Yes.
And if I'm trying to gently go over an edge,
and then I just, boom, shins.
Polycoa pivot in the hangman configuration.
Notice a lot less hardware.
Okay.
And here we go.
So this is a four-to-one mechanical disadvantage.
Yep.
Hold that.
430, 440, 440, just don't even move and you're just...
Yeah, I think the rope is just settling.
It's just everything's stretching at this point.
So you're at...
So you're in the...
560.
It's still not...
This is actually sliding on the edge.
Yeah, this did not move at 520-ish.
No.
So you're at two kilonewtons, this does not slide.
So in order for me to give you slack,
I would have to...
Undo the other side.
Literally, literally just undo this other side.
So should we see what this is?
Yeah, slide it up.
You're confident?
Well, there it goes.
So that's what I was talking about.
As soon as it starts moving, it's just gonna rip.
There's nothing.
There is nothing.
How much force does that take?
See if you can get it to move.
Yeah.
Three, 400.
Ah, 420, 440, 450.
Whoa, buddy, careful.
So yeah, that makes quite a bit of a difference.
It is nice to know that
this is pretty safe
if you weren't paying attention.
Damn near locked off.
Which you could technically lock it off.
Doing something, right?
Yep, just like you did there.
Do a cleat of some kind on one side.
Simple lock off.
So next we have the Critter.
Step up to mount my horse.
Why didn't you get on the top step, man?
Oh my God.
All right.
There we go.
They'll spot you, dude.
Pulling.
Is that what it is?
Oh, it's moving.
450, 460.
It's starting to move.
530, 530.
It's barely there.
It's 550, 550, 540,
530.
Wow, that's some friction, man.
So what do you think of that?
I mean, I trust it.
All right, what's next?
This is the Hoodoo.
Hoodoo?
Hoodoo do you do?
Same thing, right?
It's a symmetrical device
that you can put one leg on one side,
one leg on the other.
And you're not crossing one side with the other.
Nope, absolutely.
All right, mount your horse.
You're barely moving it.
You're in the 500 pound range.
You're not moving this.
There you go.
High 500s.
That's a lot.
So you're curious if this is gonna be 50% of the force.
But I don't think it is
because what happens over here
is reduced by this ring and all of this.
So you actually like 10 pounds here
gives you like 50 pounds of friction on this side.
Right, so it's not half,
but I'm just curious to see.
I'm gonna go for a ride.
So as soon as it broke free.
Okay, let go.
Yeah, it's zero.
So you do one side, it's essentially zero.
So that's definitely worth taking note of
with these systems.
As soon as I unload one side.
So if for some reason I think I need,
I still have way too much friction
and I take this fully out.
It's not half.
Like you, it's definitely,
I basically reduced it to just like a regular.
Eight would be,
I would say even less than a meter.
It's yeah, you have to hang on.
Yeah.
Have to.
And so you definitely wanna be prepared for that.
Disclaimer.
You have to hang on in any of these systems.
There.
I don't have to get sued.
Yeah, right.
The hangman method I think gives me simplicity.
It gives me ease of use.
And it really gave me the highest friction
with all of that.
So that's like a win, win, win, win.
So people should do this for the first time
when they go out in a canyon
and not practice at home.
Exactly.
Absolutely not.
And they should definitely try canyoning
after watching a couple of YouTube videos
if they've never done it.
Yeah.
Now don't get me wrong.
I've used a few of these different ones in a canyon
and it's again, all dependent on the environment
and whatever I'm doing and the conditions.
The rope you're using.
Exactly.
How many people, the weight of the people.
Right.
Hit stuff that looks like this
and make sure you check out the blog.
It'll have all this information in it.
So quick note is that there's just enough
slight differences in how all of these are machined
that these techniques can be challenging
when you're using a thicker rope.
So before you go out into a canyon
and try doing these things,
try it at home with the rope
that you're gonna plan on using it,
with the device you use,
and you'll find that maybe it won't work as well
and you wanna go to a smaller, skinnier rope or whatnot.
What diameter is in your hand right now?
This is a 9.5.
And what did we use?
8.7 I think that one was.
And that is not Dyneema?
This is Technara.
Yeah.
And I usually canyon with an eight millimeter rope.