As I was walking through the Sagebrush in the hills behind my home, I passed an old prototype (from way back in my original stove testing days), I could see that it was approximately the right size to be used as an outer cover to create a two walled wood gasifier stove (if used with the firebox stove as the inner burn chamber.)
When I get an idea I like to follow through with it right then when the it's fresh and exciting. I can usually makeshift something that will test the concept well enough to know if it deserves further consideration.
Please, tell me what you think?
And then I'll put this over the top of it like that. So for this load I'm doing horizontal small
sticks. I found just some scrap material that I'm hoping I can use to make a diverter. You can see
that I have sticks in four locations and those are to create an air gap at the bottom of my
outer shroud. So there we go. Okay, I was able to break it. All right, I don't think we quite
have enough but let's see what we got. Okay, the rest of the pieces I have are really small.
Really small. This may be this one. I kind of have one big hole right there.
What the heck? We'll put it in there. We'll try that. Let's start with that. I think that might
be enough. Okay, let's give you a wraparound view while this is warming up. The fire is getting
going. You can see the gap that we've created here at the bottom to let combustion air in
at the bottom. That combustion air should then heat up and convection should pull it up.
And it's actually burning very nicely. Ash, you stay. Let me open the door.
I almost have too much of a breeze to really be able to see exactly what's going on with the flame
pattern. I'll see if I can find something to block this wind a little bit. I set up my camp chairs.
I just kind of disassembled them and hooked them around that branch creating a thermal column going
directly up against the pot. So it seems to be working pretty good. I'm really happy with it.
Not very much smoke at all. It seems to be, you know, quite a smoke-free fire and it has great
performance. I'm very happy with it. I'm having a lot of fun today. The flame has kind of died down
and I think it's just hot coals in there now. Here's a look right down into the burn chamber
so you can kind of see how it all turned out.