Ultralight Firebox Nano Wood Fired Backpacking Stove X-CASE.

Firebox Stove
469 followers
6 Video Views·Oct 26, 2017
Ultralight Firebox Nano Wood Fired Backpacking Stove X-CASE.
Contact us: [email protected]
Purchase products here: https://www.fireboxstove.com/index.php?route=common/home
I wasn't out to make something to withstand high winds since a wood fire in high winds is a bad idea regardless of your windscreen. For the amount of wind, which I feel is still safe (to have a wood fire) the Carbon Felt Wind Block works great and if you add the flame guard on the other side it works even better. (Fire safety is the responsibility of the person lighting the fire).
Check out this new accessory for the Firebox Nano.
It's a case and it's actually a stand for the Firebox Nano.
It has carbon felt inside to protect the Nano.
Take the Nano out, take the carbon felt out,
and then down underneath are these pins that fit right into these little grooves.
They slide up into the carbon felt. You kind of have to form the holes
for these when you first get it. Then you can just slide the pins
right back into those same holes. Create a wind block.
The X pattern locks the Nano in its open position,
allowing you to tip the fire grate up and put sticks going all the way down to the floor
to create a micro Swedish fire torch. Works as an ash pan for no trace cooking.
I've been putting this one through its paces and its deep ribs really seem to give it the
strength that it needs to hold up to all that heat of a wood fire.
I'm going to go ahead and use it a little bit more right now and cook up some sausages
and grill up some steak.
These are good. Good stuff. That's good.
