How to Make Your Own Ribbon in One Step | DIY Ribbon from Fabric

A Well Purposed Woman
308 followers
How to Make Your Own Ribbon in One Step | DIY Ribbon from Fabric
Welcome to day 21 of our Craft a Day Countdown to Christmas today we are going to make our own ribbon in just one step! If you are like me you still have a few or many presents left to wrap for Christmas! Well I hope you do because today I am going to share a one step solution to add just the right touch to all of your gifts.
I know we are all short on time today. So I am going to hop right to our project. Let's make our own ribbon!
Here's the supplies you need to make your own ribbon from fabric:
-Cotton or similar lightweight woven fabrics
-Scissors
-Iron
#ribbon #diychristmascraft #wrapping #upcycle #upcycling #upcylced #upcyclingideas #gifts #giftideas
Welcome to day 21 of our craft along countdown to Christmas
And if you're like me busy wrapping presents and you run out of ribbon
I'm going to show you today how you can quickly make some ribbon from fabric that you might already have at home
So the first thing to consider is what type of fabric you're using this won't work with knit fabrics or really stretchy fabrics
It has to be a lightweight kind of woven fabric. I'm gonna be using this duck
Cotton fabric and this is works really well for ripping
So I'm just gonna start on my salvage end and I'm going to measure
How wide I'm going to make my ribbon
So this is really personal preference if you want a thicker ribbon or a thinner ribbon
I'm gonna do a variety of them today. I'm gonna start with this 2-inch ribbon
I'm just gonna do a small cut about a quarter inch to a half inch on the salvage
And then I'm just gonna take the two different sides and I'm gonna rip
I'm gonna rip it all the way to the other salvage end
so it works really best if you rip perpendicular to the salvage ends and
Then you're just going to have kind of this raw
Unfinished look on both of the sides of your fabric and I like that. That's kind of the look I'm going for
You could always use your serger or sewing machine and make it a finished end
I like this unfinished look you see how nicely it ripped and it actually really does it in a really straight line
So that's how simple it is to make your own ribbon. I'll show you one more time here
but first I just wanted to show you you can just take a wooden dowel or clothespin or even an old ribbon container and
Just go ahead and wrap your ribbon around that and it will keep it nice and flat and keep it
From wrinkling and then it's a nice way to store it as well
So super simple, we're gonna do it one more time. I'm going to make a slightly
Smaller ribbon this time
I'm just gonna cut my slit at about an inch and then I'm just going to pull apart those two pieces
And just rip to the other salvage end. So again best to rip perpendicular to the salvage ends
Just from one side to the next and then you can just pull off any threads that are loose and you're gonna have this nice
Beautiful ribbon with these raw edges and that is just gonna look really pretty on our presence
And that's all there is to it. If you have any questions, be sure to comment down below
Otherwise, thank you so much for watching
If you like this video hit the red subscribe button and stay in touch. Otherwise, have a great day
