Beaded Snowflake Ornaments!! Bead Ornament Tutorial

Christmas decorations
251 followers
31 Video Views·Dec 19, 2022
Hey guys and welcome back to Cru Time Crafts. Today I'm going to show you how to make these
darling little snowflake, beaded snowflake ornaments. These little ornaments are really
easy to make. I found the idea, I was cruising on Etsy and somebody was selling these. They were
vintage ornaments that I guess their grandmother or somebody had made. I think at one time these
may have been maybe a Bucile or Bucile, Bucile, however you pronounce that company's name,
a beaded kit at one time. I've never seen them before but I thought they were really cute so
I decided to go ahead and make them and now I'm going to show you how to make them.
Now for these ornaments you're going to need a few supplies of course. You're going to need
some 12 inch pipe cleaners. You're going to need a various assortment of beads. You're going to
need more specifically 26 8 millimeter faceted beads and these are all plastic beads. These are
the ultra cheap ones that you get from any craft store. You're going to need 12 tri-beads
are what they're called. They only come in one size. They're just known as tri-beads.
You're going to need six of one color and eight of another color of these 18 millimeter,
they're called starflake beads. Sometimes you'll find them as, they'll be called like snowflake
beads or but if you search online you'll find them under starflake beads. You also need some
eye pins or paper clips. If you don't have eye pins, pair of joy pliers or needle nose pliers.
You're also going to need some super glue and not pictured here you're going to need some monofilament,
some clear fishing line or clear thread or something like that and a needle. So let me
show you how easy these are to make. Now the first thing you want to do is take your pipe cleaners.
You're going to need two pipe cleaners for each ornament. Basically all you're going to do is
take it in half just like that and take a pair of scissors that you don't care about because these
will damage your scissors or a pair of wire cutters if you have them and just go ahead and snip these
in half so they look like that and you're only going to need three of these for each ornament.
All right so what you're going to do here with these three pipe cleaners that have been cut in
half, they're about six inches now, is you're going to make them into a six-sided snowflake design
thing here if you will. But you're going to need to put all of these together or fasten them somehow.
You can sew them together if you want to. I don't want to. It's too time consuming for me.
So I'm going to show you how to do this real quick. You're just going to take one and fold it in half
and put a pinch in there. You're going to put a second one in and put it right there in the center
and fold this up. Now you're going to take this and you're going to cross these over each other
so you're actually wrapping around this second piece here. Then you're going to take your other
one here again fold it in half so you know where the center is and you're just going to
put this around like that. Pull it over. Now all of these are secure. None of these are
going anywhere. It's on there. Now what you're going to do is build up your beads on each one
of these little, I'll call them fingers, of your snowflake. And I'm just going to do one finger
here so you can see how they go on and the progression of the beads. I'm going to start
with an eight millimeter bead and I'm going to string this on like that and push that all the
way down to the bottom. Then I'm going to take a tri-bead, put that on, put on another eight
millimeter bead here like that. Then I'm going to take a starflake bead and put that on maybe.
Where's the hole? Can't find the hole. There we go. Put the starflake bead on of one color.
Then you're going to take the other color of starflake bead and put that on and nestle them
down so they're on each other like that. Then you're going to do another eight millimeter bead
on there, another triflate or tri-bead, and then you're going to finish that off with another
eight millimeter bead here. And that's all there is to that little progression of beads. That's all
it takes to make this gorgeous little thing. So all I'm going to do is continue that all the way
around. All right and I'm finishing this up with tri-bead and my last eight millimeter faceted.
And there you go. That's what it's going to look like when all of your beads are on,
but we're going to have to trim these ends off as well as finish off this center here.
Now to finish off this the ends here of your snowflake you're actually going to
you want to make sure that all of your beads are tucked up nicely in the center here. First of all
that's important here, which they all are. Now what you're going to do is actually remove
this last bead here and you can see where it ended on where the end of the or the tip of the
bead came to the end of the the pipe cleaner. So what you're going to do is cut just below that,
cut that off like that and what you're going to do is take a dab of super glue and just put
one drop of super glue there on the end of the pipe cleaner and taking your bead here you just
want to slip that on and that should almost instantaneously set so it will or instantaneously
dry. Now if your kids are doing this this is the best part or this is a part that is best left to
you the parent to do this because you don't want your kids messing with the super glue
and gluing their fingers to each other and getting beads stuck where they shouldn't be and
it's just super glue is about best left to parents. You can see there how instantaneous
that dries there. All right so I've got all six of my points done here all of the edges are or the
ends are trimmed of let's clean this up a little bit so you can see that so there you go all six
points are done. Now we need to attach a hanger. Now you could do this using an eye pin if you
have an eye pen. I don't have one laying around so I'm going to use a paper clip for this and
you want to find one of your ends here that the paper clip goes in a little bit.
It doesn't matter which one just pick one and you want to see if the hopefully the paper clip will
go into one there you go will go into one of these you want to stick it down as far as you can. Now
the glue sometimes sets up between these two beads right here so you can't get a paper clip in there
that's perfectly fine but what you want to do is shove that paper clip in there as far as it can
possibly go which really won't be that far and you want to take a dab of super glue and put that
right on top. Now you may be concerned with the super glue dulling these beads. They do a little
bit if you get it on the outside but the inside they don't so don't worry about them becoming
dull because of the super glue. Anyway you want to set this off to the side and let this dry.
It takes a little bit for that super glue to set up when it's exposed to air so I'm going to let
this set up for a little bit and then I will be back. All right so this is set up for the
most part now. What I'm going to do is I'm going to cut this off leaving about three-eighths of
an inch or so. You don't want to leave too much because then you'll have a huge loop and you don't
want a huge loop so you just want to cut that off there and then using your jewelry pliers here
you just want to form a loop. You can also use needle nose pliers for this that works just fine too.
So bend it up and make yourself a little loop like that. Hopefully you can see the loop. It doesn't
really matter which way it's pointing if it's not really a very good loop but I don't do my
best work on camera. But there you go that is the loop that you can then hang this from. Now we're
going to focus on finishing off this center here. Now what you're going to do is I'm going to be
using monofilament here. Hopefully against this black background you can see it but what you're
going to do is you're going to sew on another starflake bead here. This will be the seventh and
eighth of your secondary color here. The snowflake bead followed by another eight millimeter bead
right in the center. Now you don't have to sew these on if you don't want to. That's perfectly
fine you can glue them. I wouldn't do the super glue although you can if you don't you know but
to keep the optimum shine you probably want to use something like a hot glue gun which is what
the originals have but I want to make this a little bit nicer so I'm going to take this
monofilament here and I'm going to leave about a six inch or so tail here. I'm going to string on
one of my beads here. All right leaving a six inch tail or so I'm just going to tie a knot on this.
Now the nice thing about using this thin monofilament which is actually a nylon quilting
thread it's super strong but you can't see it so I'm just going to tie a double knot there
so the bead stays in place and what I'm going to do is place this on the center here and I'm
not going to actually sew this starflake on I'm just going to wind the monofilament around in
between the lobes and back down and if you do this correctly this monofilament here will go
underneath the bead and you won't even be able to see it and you can get really I mean you don't
have to go around a whole lot of times just enough to secure it and that's all I'm going to do for
that side now for the back side you're going to place your starflake bead in there and I know my
fingers are all getting up in the way here and I'm sorry about that but hopefully you can get the
idea here see that right there in the center and I'm just going to wind this on now these
starflake beads should sit right in the center of they should center themselves over the
first beads in the center of the ornament so get them in there so they're nestled nice and
cozy in there go around this a few times just like that and then you want to take the other
end of your thread here if you can find it and string this bead on just like that
and then again I'm going to wind this around to the back or the front whatever and take that six
inch tail that I left and I'm just going to tie this off in a few knots to finish this off
we're going to finish this off with one final knot right down there just like that then you want to
grab these loose ends and just trim those off and then you can go ahead and fluff out the
little arms of your snowflake there attach a hanger and there is your completed beaded
snowflake ornament see it's super easy these are great for kids to do they don't take a whole lot
of time but remember let an adult do the gluing on the ends but otherwise this is a great little
kid's craft and you can make them in any variety of colors got that one that I just did here's a
one in blue and white it's dark blue and light blue you could do red white and blue if you wanted
to here's one that is red and white here's one that is pink and purple got one that is yellow
and green here's one that's kind of a pink and light aqua color if you will here's one that's
white light blue with purple beads purple accents so you can make these any variety of
colors that you want get the multi-colored packet of beads and separate these out these all came
from the same pack of beads so you've got yourself a great little selection there but there you guys
hope you guys enjoy thanks so much for watching and we'll see you next time
