Origami Spiky Balloon Tutorial

DIY Cute Things
114 followers
Comments are disabled for this video.
Hey guys, what's up? So today I'm going to show you
how to make the spiky balloon or the spiky ball or the spiky water bomb, okay?
And as you can see, it's just like the
the regular traditional water bomb, except it's more modified and
much cooler. And what's really cool about it is that if you
put this one heavier side right here, see right here,
you put that side facing up,
face it up a little bit, put it up like that. It wants to roll over like that, okay?
Yeah, I don't know why it does that, but that's just the cool thing about it.
You can make your friends like that or something, okay? All right, so I'm going to show you how to fold it now. So this model
I folded from
a sheet of 8 1⁄2 by 11 because the layering of this tutorial, I'm going to use a standard
10 inch square of pink.
Okay, all right, so what we're going to do is, um, we're going to fold it diagonally in half.
So we're going to take this point
right here and bring it to this point right here. Now what we're going to do is we're going to fold in half.
So we're going to take this raw edge and bring it to this raw edge, okay?
Okay, and start to rotate and let's fold in half the other way. So we're going to take this edge and bring it to this edge.
Okay, it starts to unfold.
And now what we're going to do is we're going to make a doormat on this edge.
Okay, like that. And now what we're going to do is let's rotate and now
let's take, let's take this edge and bring it to the middle.
Just like this.
Okay.
And crease sharply.
Okay, like this.
And now it's unfold. And now let's rotate. And now we're going to make a door base in this direction now.
So we're going to take this edge and bring it to the middle crease. Okay, and make the
do it against it that way. You can see the crease better. Okay, now let's fold the edge to the crease.
Okay, just like this.
And crease sharply.
Okay, and now let's rotate. And now let's take this edge and bring it to this edge.
Just like this.
Okay.
Now it's unfold here and unfold here.
And now let's turn back over. And to make this easier to demonstrate, I'm going to
draw some points in for you that we're focusing on. So this point right here.
This point.
And this point.
Okay, you don't need to do this. I'm just doing this so that it's easier to demonstrate. Okay.
So this point right here is going to be point A.
Point A right there. Okay, this is going to be point B.
Right there.
And this is point C, which is the middle point right there.
And this is point D.
Okay, so let me put my marker up. Okay.
Right there. So what we're going to do is we're going to fold point A to point B.
Okay, just like this.
And crease sharply.
Okay.
Now it's unfold and now it's fold point A to point C right there, which is the middle point right there. Okay.
Okay, it's just like we're blending something. Okay, but we're just doing it on this point.
Okay, just like this and now it's unfold and now it's fold point A to point D now.
Which is the last point.
Or the farthest point.
Okay.
And crease sharply.
Okay, just like this.
And now it's unfold and now we're going to do that same
sequence in the
other direction. So well in
in the
remaining. Yeah, so we're going to do the same sequence in this direction,
this direction, and this direction. Okay.
So let me show you this again. Okay, and I'm not going to label the points again because you'll get a sense of how I do it.
Okay, so what we're going to do is we're going to fold this point to the nearest point right there.
Okay.
Now it's unfold and now let's fold this point to the middle point right there, which is point C.
Okay, like that.
And unfold and now let's fold this point to the last point right there. The last point.
Okay, the intersection point.
Okay, just like this.
Okay, and unfold and now in the other two directions, I'm going to go, I'm going to go a little bit faster. Okay.
So like this and I'm not going to talk too. Okay.
But you'll get a sense of how I do it.
Okay, so this is what your model should look like right here. Okay, so we should have a four by four grid
and each square
has an x in it right here. So you have an x in it.
Okay, what we're going to do is we're just going to refold these points right here.
Just like that. So we're just refolding those. Okay.
And now what we're going to do is we're going to fold in half on the horizontal crease right here.
See this horizontal crease right there.
We're going to fold in half on that. So we're just folding in half. Okay.
We're folding the model in half just like this. Okay. So we're basically bringing this edge and folding it to this edge right here.
This edge.
Okay.
Okay, and you can make that sharper.
Okay.
Now I'm going to draw in some creases and remember you don't need to do this. I'm just doing this to demonstrate it.
Okay.
So I'm making it as simple as I can.
Okay.
So like this.
Okay.
All right. Now what we're going to do is we're going to focus on the creases that I just drew on. Okay.
And so this crease right here, this one that I drew on, we're going to make that a mountain.
So what we're going to do is we're turning this into a waterbomb base. Okay. So this crease that I drew on right here.
That's going to be a mountain. So let's get our pinchers out and just pinch it
a mountain like that.
Okay, and now let's turn over like this and now let's do the same thing on this crease right here that I drew on.
So let's pinch it a mountain.
Okay, just like that.
And now we're going to do is we're going to
keep this up like this and what we're going to do is we're going to tuck this point inside.
So we're going to
bring this point and we're going to tuck it inside so that it comes to this bottom point right here.
So it comes to this bottom point right there.
Okay.
So like this, let's flatten it first like that.
And then now we can just refold this
edge to the right like that.
Okay, so as you can see we've made a half waterbomb base now, okay.
Now we're going to do the same thing on this side now. So see this crease that I drew on right here?
This crease that I drew on.
We're going to make that a mountain. So let's get our pinchers out
and just pinch it a mountain like that.
See, like that.
And let's do the same thing on this crease I drew on. So get our pinchers
and just pinch it like that.
Okay, and hold these two edges together. Okay, like that. Okay.
So like this and now we're going to do the same thing. So we're going to
take this point and tuck it inside so that it comes to
this bottom point here. So it comes to this bottom point here.
So just like this.
So flatten it first and then
you can refold the edge to the left.
Okay, so like this.
So here we made a waterbomb base now. See, a waterbomb base. Okay. All right, so I'm going to draw some
points in now.
So we're going to focus on this point
and this point.
Okay, and this point too. So that's an intersecting point. Okay.
So we're going to do is we're going to make a crease that goes along
this point
and this point and goes all the way down. So we're going to make a crease that
that goes along like that and we're also going to do it from this point
to this point. We're going to make two creases right there. Okay, and this is how we're going to do it.
What we're going to do is
we're going to fold this point
to that intersection point right there. See that x right there?
See, we're going to fold this point to that x right there.
Okay,
like that and make a nice sharp fold.
Okay,
So like that. All right,
so now we're going to do is we're going to do the same thing on this side.
But we're not going to do that yet. What are we going to do is let's refold this
and we're going to what we're going to do is um, let's lift up this edge right here and see this point right here
that we folded to this X right here. What we're going to do is we're going to fold it up
now. So we're going to fold it up on the existing crease.
So we're folding it on the existing crease right there, okay.
Or in other words, we're gonna fold it to this edge here this edge. Okay, just like that
Okay, and now we're gonna do is um, see this um flap right here. See this flap right here. Okay
Okay, just like that, okay
Hope we can see that and now we're gonna do is we're gonna fold it over
We're gonna fold this over the edge right here over the edge
Okay, just like that
And make sure it goes tightly over the edge too. Okay, like right over the edge and once you get that pretty sharply
Okay, or you don't have to fold it over the edge
If you want you can just unfold this and you can just fold it on the existing crease because see there's a crease right there
We're just holding on that but I like to fold it over the edge
Okay, and now we're gonna do is let's unfold it and now let's put your finger inside here
Kind of helps to put like a
Marker in there or something or maybe a pen or pencil. I don't know. So see this see this slot right here
So maybe you can put your finger inside there and now we're gonna do is we're gonna tuck
This point right here that we fold it over the edge. We're gonna we're gonna refold it tucking it inside
So we're gonna tuck it all the way inside. So let's insert it inside like that
and then you can
flatten everything
Just like that. So that's what it looks like right there
Okay
Zoom out now
Okay. All right. Now we're gonna do the same thing on this side now
So we're gonna fold on this crease that I drew on here. So we're gonna fold this point to this point right here
See this point right here. We're gonna fold this point to that point
Okay, just like this
And now we're gonna fold this point to this edge right here or other words. We're gonna fold on this existing crease here
This existing crease right here
See just like that
Make that sharper and now we're gonna fold this up do this up. We're gonna fold it over the edge here
Just like that. And now let's unfold it now put your finger inside there and
Tuck the point in like that
okay, just like that and
Refine everything. So now this side is done. Okay. Now we're gonna do now we're gonna turn over right to left and let's do the same
Process on this side now, so I'm not gonna draw the points in for you
Okay, so I'm just gonna do it so that you get a sense of how I do it
Okay, so we're gonna do is we're gonna fold this point to that intersection right there. So to this
intersection right there
okay, and
Let's fold it over like that
Or folding on existing crease now, so we're folding it back and let's take this thumb and fold it over the edge
like that and
Put some pressure right here
Okay, you don't have to put your finger and you can just put some pressure right there and it'll do
And tuck this point in like that and as you're doing it, make sure it doesn't get wrinkled right there
sometimes the edge gets kind of shifted there and
Makes everything get kind of out of shape
So crease sharply like that and now let's rotate and do the same thing on the sides
Let's take this point and bring it to this point right here
Okay and refold it like that and fold this over the edge
Okay, just like that
Fix this up a little bit
Kind of out of shape there. Okay
There we go and fold it over the edge
And put some pressure here and tuck the point inside
Okay, so all sides are done now. Okay. Now we're gonna do is we're gonna blow the model
Up now, so in order to blow it up, see there's a there's a little entrance right here
There's a little entrance where you have to blow it there. I don't know if you can see it, but it's there
There's a little hole right there. Okay, this is the thick side right here
So this is the thick side and this is the thin side right here
So the hole that you're gonna blow it in to blow it up is on the thick side, which is this side right here
Okay, so here we go. I'm gonna blow it up now
Just like that, okay, and then you can kind of fix everything up
Kind of spread everything out. Okay, and there is the spiky balloon, but um
You need to um, as you can see, it's not spiky yet because we just blow it up
But we're gonna turn it into into the spiky ball now. So
Here we go. This is how we're going to do it. Okay, we're gonna do is see how see there's some like diamonds here
See how forms like a diamond here and then a diamond here. See there's diamonds all over
What we're gonna do is we're gonna push on the valley folds
That go in the diamond like that. Not the mountain folds, but the valley folds. We're gonna push on the valley folds. Okay, we're just
Pushing on them like that. So we're pushing on some pre-made creases
Okay, and right here too
Okay
here
Like that
Okay, might be a little tricky because you have to kind of go so that you don't make sure you've made any glitches, okay
Like that just make sure there's no glitches in there
Okay
That came undone. Oh, yeah, it'll be tricky at first
Okay, just like that
And I kind of got crooked there. That's okay. Okay, just make sure you didn't make any glitches
Okay, and there you have it a spiky ball
Or the spiky balloon or the spiky water bomb. Okay, and where's the heavy side?
It's right here. This is the heavy side right here. This is the side where we blew into to blow it up
so, all right, so what we need to do is um
You um, hold it right here. Make sure the heavy side is facing up right here and let go and
Roll over roll over to the side. Okay
See, it'll just roll roll over like that. I don't know why
But yeah
That's just the cool thing about it, okay
Yeah, all right, well hope you were able to fold this model and yeah, I call this like a low intermediate model maybe
Maybe an intermediate model. I don't know. Okay, but anyways, I hope you were able to fold that and I hope you liked it and
like the video if you liked it and
Subscribe if you have not done so and remember I appreciate leaving comments down below and I'll see you guys later. Bye
