How to tie a rose bud necktie knot

Fashion & Style
Fashion & Style
319 followers
2K Video Views·Dec 17, 2022

The rosebud tie knot is an impressive and complex knot that can be used to impress someone or take your ensemble to a whole new level. It requires a lot of practice to get it done, but once you have it, it will become effortless. The results are well worth it.
There are hundreds of ways to knot your tie, but most people stick to the traditional ones. In the video below, we'll talk about how to create this complex knot. Watch the video below to learn how to tie the very complex Rose Bud Knot!
Here are the steps to tie a rose knot :

Part 1: Creating the Base:

Drape a tie around your neck with the smooth side out. The narrow end of the tie should be over your shoulder, and the big end should be hanging above your belt line. You should also be wearing a dress shirt with the collar turned up. The seam should be on the back of the tie.
Pinch the wide end widthwise. The first button of your shirt should be level with the collar. To make the dimple, you can twist the tie's sides against the center. This will create a fan-fold effect, with the edges pointing toward your chest.
Bring the narrow end over the crease. Pull it up toward your shoulder so that it crosses in front of your neck. There will be a space between your neck and the crossed ties. This is the neck hole
Pull the narrow end through the neck hole. Put the skinny end under the hole for the neck. Put it through the hole on top. You will have the start of a knot on your hands.
Feed the narrow end through the neck hole again. Put the narrow end back under the knot. Pull it up and put it back through the hole in the neck. Again, pull it down and to the left again.
Wrap the narrow end around the knot and your finger. You should put your finger on the knot. Wrap the narrow end around your finger and the knot.
Feed the narrow end through the neck hole and down through the loop. Put the skinny part under the knot. Put it up through the hole in the neck. Getting stuck in a loop. Pull the skinny end through that hole.
Part 2 :Forming the Bud
1 .Tighten the knot. Pull the knot gently up so that it rests at the base of your neck. It should fit well but also be comfortable.
2.Fold the narrow end in half, lengthwise. This will make a fold that will become the bud's petals in the end.
3.Feed the narrow end through the neck hole. Pull it up, making sure to keep the narrow end folded. Put it in through the hole in the neck. Pull it to the left and down. Place the part that has been wrapped as far to the right as you can.
4.Wrap the narrow end across the front of the knot. Place it so that it rests across the front of the wide end just below the knot. Still, you need to keep it folded.

5.Feed the narrow end through the neck hole again. This time, pull up and to the right on the narrow end. Place it as far to the right as you can as you push it through the neck hole.
6. Repeat the previous step one more time. Move the first part that is looped to the left. Move the thin end up and to the right. Put it through the hole in the neck, and pull it to the right. Adjust the two layers of wrapping so that they overlap each other.
Part 3: Finishing the Knot

1.Wrap the narrow end around the tie. Pull the narrow end toward the tie around your neck. Wrap it a few times around the band until there is nothing left. This takes care of the back end. Don't worry, in the end it won't be seen.

2.Cinch the tie. Pull the rosebud that is tied so that it rests against the base of your neck. Again, it should fit well but not be too tight.
3.Open up the petals, if desired. Use your fingers to gently open up the hole in the center of the bud that is the smallest. Move the layers to the side to make them even more visible.
4.Turn down your collar. You are now ready to go!


Thank you for watching. Follow our channel for more videos!