After spending the weekend in the UK, and doing a live demo at UKIWS (UK and Ireland Woodturning Symposium), I took the piece I demoed on home with me to Italy, and finished it in the comfort of mine own shop.
Feel free to share and recommend this video to your friends and family, a thumbs up would be appreciated, and if this is your first time to my channel, you are most welcome to subscribe!
Welcome back to my shop. In this week's video I'm going to complete this form that I've started
in the UK and Ireland woodturning symposium I went to in the past weekend. Now before I start
to turn this piece to completion I would like to thank a few people. First and most I would like
to thank Martin, Mike, Steve and Rob for everything they've done to put this symposium
into effect. It was absolutely amazing. I would also like to give a special thank to my friend
Bram Sharp for giving me my first pint, my first English pint in an English pub and obviously a
nice lunch. And I also would like to thank my very good friend Tom Stratton for hosting me
in the night between the two days of the convention of the symposium. So without
stretching this intro too long let's chuck this between centers because I'm going to have to
turn the tenon a little bit a little bit smaller for my smaller chuck
and then we'll start to hollow this out.
What's up?
It's the right train
Hold my ticket, book my place, buckle up, let's go, I know that this is the right train
It's the right train
I unseen me through, pick the right train, I could be rolling, rolling back to you
Taking me where I see my face, where the shop don't need to tell me this is the right train
Before I give my usual ending speech which you've become accustomed to I want to stop for a second
while I turn this finished vase and give a couple of shout outs and thanks for a couple of people.
So the first one would be Leon Britton which supplied this really really nice piece of
view for me to turn and he has a site wouldyoubelieveit.co.uk I will put the link to
the site to the site in the description guys this is where you find all the extra information
so in the description please find would you believe it Leon Britton site.
My second shout out goes to Karol from KKMake I'm not sure that is how you pronounce the name
of your channel but this is how I pronounce it so Karol from KKMake he also gave me a sticker
which will be my first sticker ever so Karol I hope you're watching this and I especially
prepared my tailstock for this I cleaned it and everything and here is my first ever sticker
there we go nice first ever sticker on my lathe first ever sticker in my shop
again down there in the description you will find KKMake the link to the channel
and please go there watch his movies subscribe show your support
even though I find it hard to pronounce the word support sometimes
I want to thank you for joining me for this week's video and I hope to see you back in my shop
really soon there is a bug a bug has just landed and he's walking around my vase
