How to make silicone molds using Easy Mold Silicone Putty - Video 1

Crafty Patti
148 followers
15 Video Views·Dec 11, 2022
THIS IS A SERIES OF 3 VIDEOS.
VIDEO 1 is How to instructions and follow along video on how to create sea shells molds using the product EASY MOLD SILICONE PUTTY. I made sea shells mold but feel free to grab any trinket, toy, jewelry piece or whatever and make a mold of anything you desire.
VIDEO 2 - How to video on making SILICONE AND CORNSTARCH MOLDS. I also do a comparison on the Easy Mold Silicone Putty product compared to the silicone and cornstarch method.
VIDEO 3 - How to instructions on making sea shells using the product ART RESIN.
Hi Crafty Patty here.
Tonight I'm going to be making some molds.
I'm going to be using the product Easy Mold Silicone Putty.
I haven't used it before so I'm going to give it a try.
I love seashells. I love going to the beach.
So I've got these beautiful shells.
So I'm going to use these to make my molds.
So stay tuned and we'll do this together.
Okay, so here's the Easy Mold Silicone Putty.
So let's see what we've got here.
We have a container for part B and part A and instructions.
And as per instructions it says to mix equal parts of both A and both B.
So I'm going to need enough.
So it's big enough to cover this shell completely.
So let's start with about that much of the A.
And I'll try to get equal portions of the B here as well.
So I'm going to need enough that when this shell presses down into it
it's going to still be thick enough to allow for the depth of that shell.
And this won't cure until I start putting the two parts together.
There's no order to this, which is kind of nice.
And it just feels maybe a little bit oily.
So I'm going to put those two together now and just keep molding it in.
It almost feels like a plaster seam consistency.
You want to try to mold it in as fast as possible
because it doesn't give you a lot of time before it starts to harden up.
See, we're still getting some marbling there.
So we want to get all the marbling out.
Okay, so now I just want to make it nice and smooth.
The heat from your hands helps to mold it together.
That's looking pretty good.
Now I'm just going to take my shell, put it in the middle there, press it in.
Leave that alone for 30 minutes and then we'll come back and check and see what it looks like.
Okay, so the 30 minutes is up.
So now I can remove the shell from the mold.
And that actually comes out very nicely.
And that's made quite a nice impression inside, I would say.
Go to video 3 in this series and I will show you how to make this beautiful shell using art resin.
