331. Glazing a Sodium Silicate Texture Vase with Hsin-Chuen Lin 林新春 岩花瓷瓶上釉示範

Soul of Siberia
114 followers
2 Video Views·Dec 11, 2022
To see or buy my finished work and pottery tools, please visit my ETSY shop:
http://www.etsy.com/shop/hsintools
To watch more of my throwing videos, please visit my channel:
http://www.youtube.com/user/hsinchuen/videos
To learn more about my back ground, please visit my Website:
www.mypots.net
Follow me on Instagram: hsinchuenlin
Okay, I'd like to show you how I glaze the pieces with the sodium silicate surface
Because a lot of people ask me how
they glaze
the
Texture so that the texture will be able to show at the fire
So this is what I'm planning.
I will put the acetadone glaze inside first and then
Pour it out, okay, and then turn it upside down
Brush the underglazes here
on the bottom
This two part here, underglazes, and then I'll wax
then I turn it upside down and
Also brush the
red understand here and then wax it
And then later on I'm gonna brush the black glaze
brush it over and
If I brush it, I'm gonna wipe it. Okay, wipe it up
so when I brush the black glaze, the glaze is gonna go through the deeper spot, but
While I'm wiping up, I won't be able to go to the deeper spot
so I will reveal the texture on the deeper spot, but
The surface will be the white color because this is porcelain
So this is my plan
I want to show you how I glaze it
so first I will put the
acetadone glaze inside
Pour it carefully so that it doesn't drip on the side of it. Usually you want to have a better
Pouring container to put it in, but I don't have it here in my studio
And I try to
Turn it slowly
A little bit dirty on the surface already, but it's okay
I'm going to put the black glaze
so it won't affect the texture
Just carefully pour it out
Put a chuck
Center my chuck
So that when I'm putting on the wheel I could get my line nice and clean and easier
That's the reason I'm doing it on the wheel
Pour in my underglaze
Not underglaze, my stain. This is a red iron stain
You want to use a thick brush so that you get some more juice while you're brushing
The glaze or the stain
That's the stain on the bottom part
I told you that I'm going to use wax
To coat it
Wax resist
Glazing is very time consuming
You're going to do a good job
You have to be patient
You want to plan ahead too
Okay, so bottom brush with the wax resist
Then we're going to turn it upside down again
We don't have a chuck anymore
This is the material, it's called absorber
You put it underneath
It creates more friction when you're spinning
It's easier when you're ready to wipe out
Okay, so there's the friction
Versus if you just put your clay on top of it
It's very easy to slide away
You're going to create more friction
So that's why I put a piece here
And of course you need to center it too
Then here, in this section I'm going to brush the red iron stain also
Carefully so that it doesn't drip
And again, I want to use the wax resist to protect it
I'm going to touch up the spot that's a little bit deeper
That the wax won't go in
And touch it up
Okay, so I'm finished with the stain and the wax
Actually the wax takes time to dry
Usually you want to wait a little bit
Maybe like 15 to 20 minutes
So that the wax is better to resist the glaze
So this color looks like my stain
But it's actually the black glaze
After the fire it's going to be black
The stain is going to be brown
Just to show you the difference
Before I do that
I usually add water to my textured surface
Brush some water
The reason I'm doing it is that
Because this glaze is very porous
So it absorbs the glaze easily
It's hard for the glaze to get into the deeper spot
So if I put a brush of water over
It's easy for my glaze to go into the deeper spot
So I need to soak more water
I want to just let the black glaze stay inside the texture
But on the higher point
I'm going to use a sponge to wipe it
Since I'm going to wipe it
So your glaze doesn't need to be so thick
Because you're going to wipe it up anyway
That's why I'm also adding water to the surface
So the glaze is not so thick
Later on it's easier for me to wipe it up
The same thing, if you want to apply the stain
You also want to water down your part too
And then water down your stain too
So that your stain is thinner
So it's easier for the stain to go into the deeper texture
I'm going to brush the black glaze
This glaze stain
I'm going to brush it
I think I covered most of it
Now I'm going to brush more water over
So it's easier for me to wipe it
Also the water is going to push the stain into the deeper spot
Now I'm ready to wipe it up with a sponge
I'm putting a small piece of so-called absorber
This is a spinner that can spin
So I'm going to put it right here
On the center
So while I'm wiping
I'm also pushing the piece down
With the spinner, it's easier for me to hold it down
The spinner is spinning
I suppose there is an absorber underneath
It creates more friction
While I'm using the spinner, I'm pushing it down
So the piece is not going to tip over easily
You see that when I'm wiping
The black glaze still stays inside the texture
But at the higher point, the clay body
I will be able to wipe up the glaze
This is how I wipe up the glaze
It's very time-consuming
But I find that using the black glaze
I have a porcelain
It shows the contrast between black and white nicely
So that's the combination I like to use
A little spinner
I put it on top
This is how it looks
And then I'm going to dip it in the ceradine glaze
I'm just going to pour the glaze here
It's just the rim, so I don't need to have too much glaze
And just turn it upside down on the rim
For ceradine, you could glaze it a little bit thicker
So I'm pouring it longer
You see the wax resists nicely
So I have a nice clean line there
This is how I glaze my solid silicate
I take my time, so maybe a little bit later
I will just pour and maybe wipe up a little bit more
And maybe touch up a little bit
So this piece is done
After I carefully touch up the very corner
And also the bottom
So the whole piece is ready to go through the fire
To show you that the clean line is that the wax resists
But the wax resists to that
So the line is very clean
And also the line is very clean here
And the ceradine glaze is also very clean
Okay, so thanks for watching
Okay, I'd like to show you the result that I told you before
I loaded in the kiln
This is the result that's coming out just 4 or 5 days later
I glazed on Tuesday, today is Sunday
So 5 days later
Here is the result
The black glaze here in the middle
On the right hand stand
Right here on the shoulder
And also on the bottom
This is the glaze that came out pretty nice
Ceradine inside
So I show you the whole process
How to apply the glaze on the sodium silicate texture
Also if you have a carbon texture
I apply the right hand stand over here
Coming out pretty good
Hope you enjoy the whole process
And it's 2 days before Christmas
Hope you guys have a Merry Christmas
And also Happy New Year
Alright
