Epoxy Resin Wood Table Top.

DIY Creators
91 followers
14 Video Views·Dec 10, 2022
In this video I'm going to make a really simple side table but this same technique
can be used to make a coffee table and in this case I'm using it as a craft table for
my daughter.
You can pick these boards up at your local home center and they come in various sizes
but you can always make your own.
I'll begin by using a white base coat and you can grab this over at countertopepoxy.com.
As always you can choose whatever color that fits your taste.
I'll be using a mixture of 5 different colors but there's over 30 to choose from on their
website.
And for this project I'm going to be using their premium FX 1 part hardener and 1 part
resin.
There is a chart on their website to help you mix the right amount of resin for your
project.
I'm going to mix a total of 24 ounces for this and it's 1 part resin and 1 part hardener.
After mixing the hardener and resin I'm going to empty that out into a new container.
Now I'm going to take the white primer and mix that into the epoxy.
I was a little generous on the amount that I poured into the epoxy because that kind
of gave it a transparent look and I wanted that to be a darker base.
After pouring out the epoxy onto the work surface I'll then take a brush and spread
it out.
After moving the camera I didn't realize that it went out of focus and all I did here
was spread it out evenly then I took the blowtorch and I went across the entire surface to remove
all the air bubbles.
I mixed another 24 ounces of epoxy and I spreaded that out equally into 5 different cups.
If I didn't mention it before I'm not an expert when it comes to working with epoxy
but I'm just trying out a few different techniques just to give me a feel for how
I want to approach things in the future.
I'm going to randomly pour all the colors into the PVC tube.
I'm not going to mix it but I'm going to let it sit into each other and it's going
to also create separation on it's own.
With the PVC not being 100% straight I can see there's a leak on the side and the colors
that are coming out of there are just really cool.
And just by doing this project I did gain a few ideas and inspiration that I'd like
to try in a future project.
So how cool is that color band that's coming right out of the tube?
So there was no plan so this is all freestyling and just whatever comes out that's what's
going to come out.
The most important thing is to get the colors in the mix that you want to see in the table.
So the next thing I'm going to do is tilt the board a little bit so that I can get the
colors to move.
I torched it once more then I came back with the alcohol, sprayed it down and just helped
some of the colors separate from each other a little bit.
Let that sit overnight and I came back the next day.
So this didn't come out as good as I would like it to right away because of the different
layers.
I just think I let it sit too long and then the epoxy just started getting hotter than
it should have.
So if you look right along the edge here you can still see the grain in the wood.
It's all being exposed and that's probably on me for not putting enough of the white
base into it which kind of gave it a transparent look.
Now I think I could have went about this two ways.
One I can sand this area down and just pour more epoxy on it.
But what I actually did to fix this was sand this area down and took some white spray paint
and then I sprayed that.
And before I do that I'm going to cut away all the epoxy drip ins and I'm just going
to use a saw to cut that loose.
Now because I didn't do a good job on the first layer there is a rough texture on here
and I'm going to sand this down and then when I put the second layer on it it's going to
be really smooth.
At this point I've already sanded down and spray painted the edges to make that wood
grain disappear.
So now I'm going to sand the entire thing down using 120 grit sandpaper all the way
up to 400 grit.
Before applying the clear coat I'm going to take a wet rag and wipe down the entire surface
to remove all the dust.
I then mixed another color of epoxy but this time I'm not going to put any color in it.
And this process is going to be the same.
I'm going to pour the clear coat right on top of the work surface then I'll take a brush
and spread it out.
For a second I thought I lost the project.
I wasn't quite ready to go away from it yet and start over again so I decided to sand
it down because what's the worst can happen.
I poured another layer of clear coat on it and then I hit it with the torch.
At that point everything looked like glass and I couldn't be more happy with it.
I'd be curious to know if you guys had a situation like this where you thought you lost a project
but you were able to save it.
I sanded the bottom one last time to remove all the dried up drips then I went on to put
on the legs.
