SUBARU THROW OUT BEARING NOISE FIX !

Monkeys & Mountains
333 followers
4 Video Views·Dec 9, 2022
Hi guys and welcome back to my channel!
So, you have a Subaru and you get a squeaky sound coming out of your clutch?
Well, this video might be for you.
Because in it, I'm gonna show you how to get rid of that squeaky sound.
So please stay tuned, it could be pretty useful.
So the first thing you have to know is that this sound comes from your throw-out bearing.
It also means that your entire clutch system is not dead.
And that's a good news.
All you got to do is just to make a little adjustment with the slave cylinder.
So I'm gonna head back home and show you how to do this.
Come on!
First of all, we're gonna remove the airbox to get a better access to the slave cylinder.
The idea is to use the fixation of the slave cylinder to push it forward.
For this, we're gonna unbolt the slave cylinder.
And we're gonna trim the back of the bolt's hole.
For this, I use a mini drill like a Dremel.
One side is done and you can clearly see the difference between the two bolts.
Now, let's get to the other one.
Once both holes have been trimmed, we can put back the slave cylinder.
For this, push it as forward as you can when you rebolt it.
And here's the result.
These few millimeters are gonna make the difference.
Be careful with the clutch fluid level, it may be a bit high after that.
And at the end, we can put back the airbox.
The process is over.
Et voila!
Now, it's okay.
No more throughout bearing noise.
It was a pretty easy process and with it,
you can get rid pretty quickly of that annoying squeaky sound.
So if your Subaru makes this sound, just give it a try.
You're not gonna be disappointed.
And sadly, this is already the end of this video.
I hope it's been really helpful.
If you want more of this, you can definitely subscribe to my channel.
And also, don't forget to check my Instagram account and my Facebook page.
Thank you guys for watching and see you next week.
