Patch hole in carpet DIY 3 minutes HOME DEPOT materials

C.L.S. All-IN-ONE
129 followers
22 Video Views·Dec 9, 2022
I'm going to show you how to repair some carpet today.
We got a pretty good sized hole here right in the middle of the living room.
It looks pretty bad so I got some tricks on how to fix this and some tips and
and even if you can't find carpet that matches I got some tricks for that too.
So let's get started.
So I was only able to find any carpet that matches so what I'm going to do
is cut a chunk of carpet out of the closet right here.
I'm just going to use a straight edge to cut a chunk of that carpet out
and then we're going to replace that carpet with something else.
It's not going to match but it's okay it's in a closet it won't be that noticeable.
So we're going to use this chunk of carpet to make our patch in the living room
and then we're going to patch the closet with a different type of carpet.
So before we make any cuts to this carpet from the closet
we're going to use that as a template
and we're going to trace that onto this carpet remnant we have here.
So I'm tracing the old carpet onto the new carpet here with a pencil
then we're going to use a straight edge to get that cut out.
Now we're going to have a patch ready for the closet later on.
So now it's time to cut out the damaged carpet.
So I'm just going to use a straight edge and a utility knife to cut out the carpet.
It doesn't need to be a perfect square
because we can just use whatever we cut out as a template to make our patch.
So get this all cut out.
I'm going to cut out our pad also.
We're going to replace that too.
Now we got everything cut.
So we're going to use what we just cut as a template for the new pad here.
We're going to use a pair of scissors there to cut our new pad.
We'll get that pad in place then we're going to staple that down.
We're going to staple the old pad plus the new pad.
Make sure all the edges are secure.
Now it's time to use our carpet template to trace that pattern onto our new carpet there.
So we went ahead and used a pencil
and we're going to use a utility knife to cut it out here.
Then we're going to check the fitment of it here.
Make sure it fits good.
Make sure there's no more trim that needs to be done.
So everything seems to fit well.
Now we're going to pull it back out.
Now it's time to add our seam tape.
Here's a look at what we'll be using.
This is a single-sided self-adhesive carpet tape made by Roberts.
So we want to go ahead and outline the carpet there with the seam tape.
And we're going to have half of it exposed and half of it underneath the old carpet there.
That way we have a lip for the carpet patch to sit on.
Once you've got that in place, it's time to put our carpet on.
So this tape is extremely sticky.
You're going to want to be careful and line up one of the edges perfect there.
Be nice and steady.
So we're going to just barely push into place
and we're going to go around the entire perimeter of the carpet here
and make sure everything's put up nice and tight before we press down firmly on anything.
Once everything's in good position, go ahead and press down firmly on all the edges.
Here's a look at the finished product.
As you can see, it's hard to even tell where the patch is.
And that's what we want to go for.
So now that we know how to patch carpet, it's time to take care of that closet.
So we're going to use that piece we cut earlier to patch it back up.
And there's a look at it.
Thanks for watching.
Please like and subscribe.
