Dollar Tree OUTDOOR DIY Decorations For Christmas (Gift Hacks!)

New Cottage
211 followers
8 Video Views·Dec 9, 2022
The next time you're in Dollar Tree, pick up some of their square wreath forms.
You do not want to miss this DIY.
Last year I made gift boxes meant for outside decor using Dollar Tree baskets.
This year I wanted to try making them using cooking racks from Dollar Tree, but I came
across a TikTok account recently named LexiDIY where Lexi made gift boxes using the square
wire wreath forms from Dollar Tree, which I think is an even better idea because you
get a bigger box.
So I'm going to share with you guys some slightly different ways from Lexi's to make these boxes
and make sure to check out LexiDIY.
I will have her information in my description box.
I'll be using zip ties to attach the wire forms together.
So all you have to do is place two side by side and then use zip ties to attach them.
And you're going to do this with all five of them.
So you'll attach four together to create the main base of the box and then you're going
to use one on the top of this and you have to place one on the top because if you do
not, the box collapses in.
You need that one at the top to make sure it doesn't collapse in.
Now I'm going to share with you guys how to make three boxes out of five of those wire
forms.
So you make your main box and then you're going to go in with some wire cutters and
you're going to start cutting out the smaller squares that are inside of this.
So each wreath form, you will see three squares total.
You're going to cut the two smaller ones out of the main frame.
Once you get those two squares out of the main square, you're going to unattach those
two squares.
So you're left with three different sized squares.
The thing about doing it this way, you are left with little sharp pieces of metal so
be very careful when making these boxes.
If you make them the way that I did, you can always go in with hot glue and put the hot
glue wherever you had cut the metal and make it a little rubber that goes there so then
you don't end up cutting yourself.
Just be very careful.
Now I went to Dollar Tree and I picked up a lot of tinsel that I'm going to wrap around
the boxes.
I'm going to share a more cost effective way of doing this after I make these three boxes.
So what I do is I use a zip tie to get my first piece of tinsel attached to the wire.
The tinsel from Dollar Tree is 9 feet long so you're going to have to attach more tinsel
to the tinsel that is already wrapped around the wire form.
I use zip ties yet again to attach one tinsel to the next.
I like to start with the top of the box and then work my way around the box and as I wrap
the tinsel around, I do take zip ties here and there to make sure that the tinsel kind
of stays in place.
But I don't use zip ties the entire time as I wrap it around.
Just any area where I feel like the tinsel is just kind of drooping too much, I'll use
zip ties to make sure it stays nice and tight.
Dollar Tree carries a bunch of different Christmas ribbon.
I'm going to be using a gold one for my bigger box and I needed three rolls for this box.
I'll be wrapping ribbon around the gift box and gluing it into place.
So basically I did two pieces around the gift box and I glued those pieces into place.
Making bows is not my specialty.
It's not something that I really enjoy.
When I try, I can do it but I just don't really like to do it.
I take the easy route and I use hot glue.
So what I did is I just took long pieces, four long pieces of ribbon and then I fold
them inward so that they meet at the halfway point and I do this with all four but I glue
them together to get the main bow.
Don't know if that makes sense but you can see what I'm doing.
I glued six smaller pieces that I had folded in half on top of the bow and then to the
very center of that I just took the very last piece of ribbon I had left because I used
it all up and I glued it to the center of the bow.
Then I glued the bow on top of the box.
To make the two smaller boxes out of the frames you cut out, you do the exact same thing.
You zip tie everything together and then you wrap tinsel around it.
Now I used 13 tinsel pieces for the bigger box.
I used 9 for the medium box and I think I used about 5 for the smaller box.
Don't quote me on the small one.
And this is why I'm like I don't know if it's the most cost effective especially if you're
getting the tinsel at Dollar Tree.
If you get the tinsel elsewhere you get more bang for your buck.
So this is how I made three boxes out of five square frames from Dollar Tree and a whole
lot of tinsel.
You could put lights inside of these.
I recommend putting a few lights in there because I had put a fairy light in each one
and you could barely see it glowing.
So now I'm going to share with you guys how I made a set that's bigger and also using
cooking racks for one of them.
And then the other thing I'm going to share with you guys is a different material beside
the tinsel.
So I made a really large box by using the wire wreaths.
But instead of cutting these apart I'm going to leave them just as is.
And I attached 5 together and on top of that I attached another 5.
So it's technically 10 that are all attached together using zip ties.
I purchased this red sequin fabric at Hobby Lobby.
Full price it's $5.99.
Half off you'll get it for $3.
I purchased 2 yards so I paid $6 for 2 yards versus Dollar Tree where the bigger box and
it's not even as big as this one.
It cost me $16.25 for 13 tinsels to wrap around that box.
To attach the fabric to these wreath forms I'm using my zip ties and I'm just pushing
it through the fabric and then tying it into place.
When you go through multiple layers of fabric so the fabric is just kind of like folded
over each other it gets a little harder so you might need something to initially poke
the hole and then get your zip tie through it.
Now obviously you do not have to use zip ties.
You can always sew this on and just slide it right over the frame.
You can cut pieces down and glue it.
It's completely up to you but this is the method I decided to go with.
If you do it the way I did it you're going to have an ugly side of the box.
It's not necessarily ugly it's just the part that you're going to put toward the back so
people don't really see it.
If you sew this and you just slide it right over the frame you probably won't have an
ugly side to the box but if you use zip ties like I did it's just called the ugly side
of the box.
Anyways and then I do the same thing to the top.
I just kind of fold it like if it were real gift wrap paper and then I just take my zip
ties and tie it all into place.
So I prefer to do it this way just because it's cheaper to do it this way and I like
the way that it looks better.
Now same thing as before I just took ribbon I wrap it around the box and then I made a
bow and placed that on the top of the box.
So that's how I made an extra large box using the wire forms and fabric instead of tinsel.
But I'm going to share with you guys how you can do it with cooking racks if that's what
you can find.
Cooking racks are easier to find than these wreath forms in my opinion.
With the cooking racks you do everything the exact same way the only difference is on the
top you have to use two cooking racks versus with the wreath forms you're just using one
wreath you have to use two cooking racks on the top just because they aren't long or they're
not wide enough I would say for your box.
And with the cooking racks you get more of a wider box versus a taller box.
Other than that everything else is the same.
If you're putting tinsel or if you're putting fabric you put it down the exact same way
and then you do the ribbon and the bow everything's the same minus that you have to use two cooking
racks on the top.
For the cooking rack box I needed a yard and a half of the gold fabric and then for the
normal five square wreath form box I needed one yard of green fabric.
So it cost me only three dollars for this green fabric versus sixteen dollars and twenty
five cents in tinsel from Dollar Tree for the same size box.
I did cut the yard in half to wrap around the normal size box.
I place one half around the box and then the other half around the box again I use the
zip ties and this time I did use a little bit of hot glue because there were areas where
it needed to be glued down and the zip ties I thought would look a little bit funny.
After that the same thing ribbon you know the drill.
That's how I made these fabric boxes with that one extra large box.
These are so nice for both inside and outside decor.
What's nice is the fabric I use is sheer so you can put outdoor LED Christmas lights under
the box and use these outside.
Now you need to stake the boxes into the ground so they don't fly away on you.
I purchased some metal stakes from Amazon.
I will link down below.
Look for the wire that touches the ground and hook the stake around the wire.
Use multiple stakes with each box and this way it won't fly away on you.
This is how they look during the day.
They are so cool especially since they are a larger size.
I actually own these boxes.
I had gotten them from Big Lots a couple years ago and they are $44.99 now but the largest
size is only 12 inches.
So this is way bigger and you just get these beautiful pieces.
This is how it looks with the Christmas lights under there and at night time.
I absolutely love the way that these turned out.
I think they are really awesome.
They are inexpensive to make because if you buy them, they are going to cost you more
especially when you are getting ones that are this big.
You can do the same thing with the tinsel boxes.
You can hook them outside using a metal stake.
I do prefer the fabric ones though.
But that is it for this video.
I hope you guys enjoyed.
Thanks to Lexi DIY for the inspiration.
I will see you guys next time.
Take care.
Bye.
