Brilliant Christmas DIYS using $1 Solar Lights from Dollar Tree

New Cottage
211 followers
26 Video Views·Dec 9, 2022
What's up, rocket family?
Welcome back to my channel.
Now, the next time you're in Dollar Tree,
check out the solar lights section.
They have solar lights in for Christmas
and not just for the summertime.
You can do some really beautiful DIYs,
especially for outside decor using these items.
So let's start off with our first project.
Get some buckets.
I prefer buckets that have a rounded out bottom.
If you cannot find those, just use what you have on hand.
Remove the handles off of your bucket.
Dollar Tree carries these Christmas light solar lights.
I really like the panel
because it's bigger than the other ones,
so I'm using that for this project.
I'm going to be gluing the solar light inside of the bucket,
making sure that the little panel
is facing the bottom of the bucket,
which is actually going to be the top of our project.
Use a heavy-duty glue like Super Glue E6000,
and I did use a little bit of hot glue
just so this stuck right away.
The other glues take a little bit more time
to adhere right away.
Now it's time to add a layer of Mod Podge
or glue to your bucket.
You just want to make sure that the glue dries clear.
I'm doing this so I can add some glitter to this,
and it's actually fake snow.
It's more like a chunky type of glitter.
You can use a fine glitter.
It's completely up to you,
but I'm trying to make this look more like a gumdrop,
and by using the snow,
it makes it look a little bit more
like that sugar-coating look that we need.
I'll be using these outside,
so I got some metal stakes off of Amazon,
and I'll link them down below for you guys.
I'm going to be using those to push through the bucket
so that they don't fly anywhere,
and now we have these gumdrops
that are perfect for outside decor.
Since these buckets are see-through,
the solar lights can absorb the sunlight
and glow every single night
without having to use lights that you plug in.
It looks adorable at nighttime.
If you want to try cutting the rim of your bucket,
you can always try.
I figure near me, the snow will cover that up come December.
These are easy and affordable.
You guys have to let me know your favorite DIY in this video
because this is mine.
Moving on to our next project.
I'm gonna be using those solar light Christmas lights again.
I'm using eight of these lights for this project,
and I'm removing the handles off of my lights
and putting them to the side for now.
You're also gonna need a hula hoop for this project
and some garland.
Dollar Tree does carry a garland,
but I got my garland for $5 at Michael's.
I got a much fuller piece
that's gonna work better for this project,
and to get a full piece like this using Dollar Tree products,
I'm gonna end up needing at least five
of their garland pieces,
and it's gonna cost me more than $5.
So I'm using a zip tie to attach the garland
to the hula hoop,
and then I start to wrap the garland around the hula hoop.
Once I get to the end of wrapping the garland,
I use a zip tie to attach that end piece,
and then I cut off any excess garland that I do not need.
We're gonna start attaching our solar lights
to the hula hoops.
Those little handles that you took off,
you're gonna place back on to the solar lights
by just wrapping the handle around the hula hoop
and then reattaching them to the solar lights,
and it's real easy to do.
You don't need glue or anything,
but if you want to use some glue
to really reinforce those handles in place, you can.
I got some ornaments from Dollar Tree,
mini red ones and then the green ones.
They don't carry mini green ones.
So I'm just going to remove the tops off of the ornaments,
and then I'm gonna glue them down.
I like to remove the top
because I don't like the way it looks,
and it makes it easier to attach it to the garland.
I'm gonna be hanging my hula hoop.
To do this, I'm using this plant hanger
I got from Dollar Tree.
If you cannot find these right now,
you can go to Amazon
and get them for a relatively inexpensive price.
Now to attach this to the hula hoop, I'm using zip ties.
I just wrap the zip tie around the hula hoop
and then loop it through the plant hanger.
I'm actually gonna be hanging this inside of my house.
So though my solar lights
are not gonna constantly be getting sunlight
and glowing the way that I would like them to,
I wanted to put this inside of my house
because I think the lights glowing or not,
nonetheless, are really cute and I matched my decor.
Now I needed to hang this before I called my DIY finish
because I need to see where I need to add more ornaments
and where I need to do a better job
wrapping the branches around the hula hoop.
And it's hard to do with this
just laying flat on top of the table.
So if you're hanging this outside,
if you're hanging this inside of your home,
hang it up and then just do your finishing touches then.
So this is how it looks inside of my home.
I love it so much.
I've never had like a Christmas chandelier.
This was really inexpensive to make.
I did add more ornaments because the one pack of the green
and the one pack of the red I used
just wasn't enough for me.
And then this is how it looks when the lights are on.
There's a little switch inside of these lights.
So you can turn them on and off
if you're gonna be using them indoors
to preserve what energy you have left.
And you can always take these outside,
unhook them, take them outside
and then get more sunlight that way.
Let's talk about our sponsor for this video, Helix Sleeps.
Helix Sleeps makes premium mattresses and bedding
that are customized to fit your needs
and shipped directly to your door.
Everybody's unique and Helix knows this.
So they created a sleep quiz to match your unique body type
and your style of sleeping
to find a mattress that is right for you.
If you sleep with someone,
you can also take the quiz for two people
to find a mattress that's perfect for you
and the person you sleep with.
So my husband Matt and I took the quiz
and we were matched with Helix Twilight Luxe.
This is their firmest memory foam model
designed with advanced support and incredible firm comfort.
I'm a side sleeper and Matt toss and turns when he sleeps.
And we both prefer firmer mattresses.
Setup is so easy.
Just remove the mattress from the box,
set it on your foundation while it's still wrapped in plastic
to remove the mattress from its plastic wrapping.
I've owned my Helix mattress for four months now
and there is such a big difference
from the way I used to sleep on my old mattress
versus now I don't wake up with all these cramps.
I get a good night rest versus before.
It is such a difference.
I really liked the firmness of it
and we opted for the Glaciotex cooling cover.
So what that is,
is it helps get like the heat off of your body essentially.
It cools you down, which is really nice.
I sleep with an air conditioner on all year round
and a fan because I get really hot when I sleep.
So this has this nice cooling feature
that I really, really like.
Helix mattresses have a 100-night trial that's risk-free,
which is really nice.
Because once I got older,
I realized just how important a mattress is.
After all, you will sleep on this every day
and if you're not sleeping well,
you're obviously not going to get enough sleep,
wake up less focused and sore, which is no fun.
I love my Helix and I think you would too.
If you're looking for a new bed, check out Helix.
Click on the link below
or go to helix.com slash bargain Bethany
for up to $200 off your Helix Sleep Mattress
plus two free pillows.
Thanks again to Helix for sponsoring this video.
Let's continue with our projects.
Purchase one garland from Dollar Tree and then some ornaments.
The garland from Dollar Tree is not very full,
but it works well for this project, just one of them.
Unless you have a really big door or big window,
then you might need multiple ones.
Anyways, I'm going to be using the same solar lights
that I've been using.
At first, I was feeding them through the garland,
but I realized it's much faster to remove the handle,
wrap it around the garland
and then reattach the light to the handle.
Originally, I used eight lights for this project
and I figured out what was going to be the middle
of the garland that would go over my door
and what would go down on the sides.
And once I figured that out,
I just bent the pieces of the garland
to kind of keep the shape of it
where it would go over the door.
Now I'm going to start attaching some ornaments
and to attach them, I'm using zip ties
and I'm doing a little cluster of just two.
I feed the zip ties through the ornaments
and then I attach them that way.
What was supposed to be the sides of the garland,
so the sides that would go beside the door,
I only put one ornament instead of doing the clusters
just because I started to run out of ornaments.
Then I'm going to glue down some of these fake peppermints
I got for 60% off at Hobby Lobby.
Right now they have 60% off, which is weird
because they don't do that till like after the holiday.
Anyways, I'm going to just glue a few here and there
all around my garland.
Now, like I said,
I was originally making this to go around my door
and I'm using the self-adhesive strips
that I absolutely love from Amazon.
I wasn't thinking when I was making the garland,
my door is too close to the roof.
So the garland was hitting the door.
In order to open the door, you hit the garland.
So it wasn't going to work like that.
Instead, I had to put this underneath my window.
And once I placed it underneath the window,
I had to mess around with the lights
and space them out a little bit more.
I also added a few more lights
just to make it more even underneath the window.
So I just went with plan B.
You can definitely make this to go around your door
as long as you have the room to open up your door
without it hitting your garland.
Here it is at nighttime, all lit up underneath my window.
Really, really cute.
And this one is so, so easy to do.
For this next project,
I'm going to be using these boxes from Dollar Tree.
They carry multiple sizes.
I'm using the biggest one that they carry.
Now I'm drilling a hole on the bottom of one of the boxes.
I'm doing this so that the solar light
I place on top of this box
can hopefully shine through that hole as much as possible.
Inside of the box that doesn't have the hole,
I'm going to be gluing wooden dowels
to the corners of this box.
I used wood glue and hot glue
to attach the wooden dowels.
Wood glue takes a little bit longer to dry,
so that hot glue keeps the wooden dowels in place
while I wait for the wood glue to completely dry.
Once I have those four wooden dowels glued down,
I then attach the top box,
and the top box is the one that has that hole.
I decided to remove the metal pieces
off of the front of the boxes
and then paint this entire thing white.
Now I took the top off
of one of the Christmas light solar lights,
and I'm gluing it to the top of the box,
making sure the light that's in the solar light
is peeking through that hole I created.
I picked up these styrofoam rounds from Dollar Tree.
Two come in a pack for $1.25.
I decided to glue them to the inside of my lantern.
Dollar Tree has these poinsettia-looking
solar lights in right now.
I purchased five of them,
and I removed the light from the actual stake piece.
So the handle, stake, whatever you want to call it,
I removed it, and I'm going to be pushing these
through the styrofoam.
Then I purchased these pine picks from Dollar Tree.
I'm going to cut them down
and place them all around the poinsettias.
This is really pretty when you take it outside.
It just glows and looks absolutely magical.
If you want to use this for the inside of your home,
you can either put the solar lights
and the lanterns close to a window
so they're able to absorb some sunlight,
or just use the fake flower poinsettias
that Dollar Tree carries.
You can see at the top of the box,
there's a very light glow
from the solar light that's up there.
Once you remove the main piece from a solar light,
it doesn't have the same type of glow.
Moving on to our final DIY.
From Dollar Tree, I picked up these 3D wreath forms.
There's two different kinds you can purchase.
I went with the smaller size.
They come with two of these thicker foil round pieces,
and that's what you use to create the 3D metal form.
You wrap the little tabs around the wire pieces,
and that's how you get it to stay in that shape.
Dollar Tree carries a bunch of tinsel,
and I'm gonna be using that for this project.
Let me know if you call it,
I got a comment last time saying this isn't tinsel.
It is tinsel.
They said it was garland, but it's tinsel garland.
Let me know if you call it tinsel,
because I just call it tinsel.
Okay, that's neither here or there.
I'm gonna start wrapping the tinsel around the wreath form,
and I'm using zip ties to do this.
So I use my zip tie to initially get the tinsel on,
and then as I wrap it, I keep using zip ties
to make sure that the tinsel isn't sliding down.
I use about three zip ties for every little,
I don't even know what to call it, row of wire.
I don't know, it's technically not a row,
but you can see what I'm doing.
Of course, we're gonna be using my favorite solar light
for this DIY, and just the top of it,
because this makes the perfect top
for what is supposed to be our ornament.
Now, there's two things regarding this.
To attach this, you can use glue.
The thing with glue is it's not gonna hold
on this very well, just because there's not a lot
of surface for this to be glued to.
I recommend taking a zip tie and attaching it that way.
I had to attach two zip ties together
to get a long enough one to wrap it around.
And though the zip tie doesn't look the prettiest,
it's very hard to see.
It doesn't really take away from the ornament.
The other thing about this,
using the solar light in this project,
you're not gonna get a glow.
The light is too little, too weak,
once you take off that light bulb piece,
that it's not really gonna glow through the ornament.
What I recommend doing is getting fairy lights.
Now, you can buy fairy lights that have a remote,
so you can just press it all on,
versus going outside and turning
on each individual fairy light.
And you can buy fairy lights that are made for outdoors.
And so, I attached fairy lights inside of my ornaments,
and when I hung these outside,
I hung them off of flagpoles that I got from Dollar Tree.
I don't really have a tree to hang these off of,
but if you have a low or shorter tree,
you could definitely hang these off of your shorter tree.
I mean, you can hang it off of a taller tree,
you just, you gotta get a ladder
or something to get up there.
That is it for the solar light DIYs.
So that's it for these Dollar Tree solar light DIYs.
I wanna thank Helix again for sponsoring this video.
Thank you so much for watching.
I will see you guys next time.
Take care, bye.
