15 Last-Minute Dollar Tree Christmas DIYs to try NOW! 🎄🤯

New Cottage
211 followers
4 Video Views·Dec 9, 2022
Thanks to SimpliSafe for sponsoring this video.
What's up Arca family? Today I'm going to be sharing some Dollar Tree hacks and DIYs using
Dollar Tree products and mainly Dollar Tree products you can buy all throughout the year,
not just seasonal. Now let's begin.
For our first hack you're going to need some candy canes and I'm going to be using the
cylinder box from Dollar Tree. I'm going to start hot gluing my candy canes to the box.
Now you can glue the candy canes side by side without the box,
it just is more time consuming and you have a higher chance of it falling apart on you.
Dollar Tree carries three different sizes of the cylinder boxes. This is the largest one
that they carried so I needed five boxes of the candy canes to go all around this box.
I purchased some red ribbon from Dollar Tree and I'm going to wrap that around the candy canes
by using some hot glue to make sure it stays in place and it helps secure the candy canes
into place a little bit more. Then I glue a bow to the front of this that I made using that same
red ribbon. Inside of this you can place whatever you want. I decided to place some poinsettias
inside of this, some real poinsettias, and it is so pretty. It makes for a great decor piece or
centerpiece. This is the larger one that I made and then I also made a smaller one using a smaller
cylinder box from Dollar Tree. Did you know that you can use the traffic cones from Dollar Tree
to make some bottle brush like trees? So what you're going to do is you're going to get a
traffic cone and some garland from Dollar Tree. I only needed one garland for each traffic cone.
You'll use your hot glue gun to start gluing the garland to the traffic cone. Once I got to the
top, I just spin it around to make it look more like the top of a tree. Now I'm going to take some
white acrylic paint and I'm going to just paint the base of the traffic cone so that it looks like
snow. I'm then going to take that same paint and start brushing it lightly on top of the garland
to make it look like a flocked Christmas tree. You can leave the tree just as is. That's only
two Dollar Tree products. Two dollars and fifty cents. Such a steal. Or you can glue little ornaments
on top of your tree which I'm going to do to mimic the bottle brush trees that I already own.
Dollar Tree does carry miniature ornaments they just don't have green ones so I went to Hobby
Lobby and got this pack for 60% off and all I'm doing is I'm going to be gluing my ornaments to
the tree. I did remove the little top off of the ornament because I prefer not to have those when
I glue them directly to the trees. That's how I made these bottle brush like trees using the
traffic cones and some garland from Dollar Tree. You can see they blend in really nicely with the
bottle brush trees that I already own. The bottle brush trees I try to buy them always on sale but
I've never been able to get them cheaper. The larger ones for less than $12. A Christmas DIY
my channel is known for is my hot cocoa bar. We're going to be making a miniature version of that
right now that is so pretty. What you're going to need are the wooden crates from Dollar Tree
and this time around I'm going to be using these wooden boxes from Dollar Tree and saving
the lid. You're going to need some wood glue to attach everything so I'm going to start by
attaching four wood crates together side by side and I used some clamps that I got from Dollar
Tree to just make sure that the crates stay in place and don't move around. Now on top of these
four crates I'm going to glue down three of those wooden boxes. Like I said I'm also going to be
the lid. You can use popsicle sticks if you have those on hand. So what I did is I removed the top
part of the lid and I'm going to be using the edges of it to cut pieces that are going to go
on top and around the wooden boxes just to cover up those holes. So I just break it apart take two
pieces just as they are those are going to go on the top of the boxes and then I take this cutter
to cut down the pieces of wood to go in front of the boxes and like I said you can use popsicle
sticks they are easier to cut with just a scissor if you want to use popsicle sticks.
The wooden boxes pop out on the back of this so to cover that up and make it look more cohesive
I'm going to be using these rectangular wooden planks. I'm going to glue them on the sides of
this to make it look more like one unit and then I'm going to use the rest that I have left over
on the back of this just to help give this more support. Now off camera I had my husband
stain this with varathane stain in early American. This is how everything looks stained.
On the front of the boxes I'm going to attach these metal label holders. You can get these
on Amazon for $4.99 a pack of 10. Now I'm going to share with you how I decorated this. I got
these mason jars with the handles from Dollar Tree and I filled these up with some hot chocolate
items like mini marshmallows, hot chocolate, and peppermint. They also have mason jars with a
different lid on the top that's perfect for seasonings and then I just placed them all
inside of my little unit that I made. I found these glass containers at Hobby Lobby. I'm going
to be using one of these inside of my mini hot cocoa bar. Without the lid I'm going to place
it inside of there and then I'm going to add some of these peppermint sticks. I found this cute
little milk jug. I'm putting that inside of my mini hot cocoa bar and then placing some stirring
spoons inside of that. Now I purchased these mini mugs at Walmart for $2.68 and then these slightly
bigger ones were from Hobby Lobby. Then I got these ornaments. They're little gingerbread
ornaments and I'm going to put those inside of my box as well. That's how I decorated my little
mini hot cocoa bar. I love the way that this looks. You can stain it whatever color you want
or paint it whatever color you want to match your decor. So it's a different take on my hot
cocoa bar that I know a lot of you guys really love. Our next hack is inspired by DIY with
Karim. She did this a few years ago. It's absolutely brilliant and more recently I saw
Make It With Mika on TikTok do a similar thing but both are absolutely beautiful. For this hack
you're going to need a laundry basket from Dollar Tree. You're going to remove the bottom of the
laundry basket. I'm just using scissors to do this. Then you're going to need something to go
around the laundry basket. I'm going to be using microfiber cloths from Dollar Tree. Karim she
used a bunch of different items it looks so pretty and then Make It With Mika used a duster
from Dollar Tree. I'm going to be doing something different. I'm going to use mini clamps to attach
my microfiber cloths instead of hot glue. You can find mini clamps in the crafter square section
of Dollar Tree. The reason I'm using mini clamps is so that I can wash the wash cloths if they get
dirty real easily. The mini clamps can be hidden within the basket and underneath the tree. By
using just two cloths you're going to have the sides of the basket exposed. So there's two
different ways to do this. You can pull the cloths really really tight get them in the perfect
positions and cover them up with the clamps that way or you can buy another cloth and just cut it
down and glue it into place to cover up those holes. This is going to be a Christmas tree basket
Christmas tree skirt if you will. Now I'm using a smaller tree for this because I don't have a big
Christmas tree this year. So all I did is remove the legs from my Christmas tree, slide it through
the top of the basket, and then reattach the legs on the bottom of the basket. If you have a bigger
Christmas tree you want to cut through one side of the laundry basket so you can just easily wrap
it around the Christmas tree. Look how awesome this turned out. This was four Dollar Tree products.
Two of the towels, one laundry basket, and then these small clamps. So inexpensive. I've never
spent this little on a tree basket before. Even when they're on sale for like 60% off it's really
hard to get them for the price that I made this for. So let's talk about our sponsor for this
video. One of my favorite products I own, SimpliSafe Home Security. Right now SimpliSafe is having
their biggest sale of the year offering 40% off of all new security system orders. SimpliSafe is
half the cost of traditional brands with professional monitoring for under one dollar a day.
No long-term contracts so you can start and stop any time with no hidden fees. Their 24-7 professional
monitoring is now powered by fast protect technology exclusively from SimpliSafe when
a threat is detected. With the holidays just around the corner I want my house to be protected.
I do a lot of online shopping and there's packages being delivered to the front of my door. I might
not be home. Somebody might try to take that package and I want to be alerted if somebody's
doing that. Or if I'm not home I don't want anybody to break inside of the house and to
take my Christmas presents. This is the base station. This is going to let you know when a
door is open. It's going to make a noise. It's going to let you know when you alarm your security or
disarm your security. SimpliSafe is one of my favorite products I've ever owned. I've been a
victim of theft multiple times. I've had my car stolen on me and my house broken into. So I knew
once I had a home of my own that I wanted to get home security. I have a child and one on the way
and I really want to do my best to protect them as much as I can. Like I said right now you can
save 40% on your SimpliSafe security system during SimpliSafe's biggest sale of the year.
Visit simplisafe.com slash bargain Bethany to learn more. There's no safe like SimpliSafe.
Thanks to SimpliSafe for sponsoring this video and being such a huge support to this channel
this year. Anyways with that being said let's do some more hacks. Get a white candle from Dollar
Tree and some Model Magic at least two packs for each candle. I'm going to be using a square cookie
cutter for this but you can always just use your knife to create these squares. I'm going to take
two packs of Model Magic, mush the Model Magic together and then I'm going to roll it out.
Once I get it rolled out enough to get two squares out of it I take my cookie cutter and use it to
cut out these squares from the Model Magic. I'm making these squares look like graham crackers.
So take something fine and pointed. I'm using a bamboo skewer and use it to create the little
markings that you need to make this look like a graham cracker. You're going to have leftover Model
Magic. You'll roll it out again and then take the lid of your candle and just roll it through the
Model Magic so you get the perfect width that you need and length. Then you're going to cut that out.
Wrap this piece around your candle lid and then use your finger to blend it on top of the lid
and underneath the lid making sure this goes nowhere. You need to wait for your Model Magic to
completely dry. This takes at least a day to do. Once your Model Magic is dried you can then paint it.
I used Americana honey brown paint for the graham crackers and I made sure I got in every little
crevice. I needed a smaller detail brush to get inside of the little holes that I made. Then the
Model Magic that's around the lid you want to make that look like chocolate. I'm using this chocolate
brown color. Once the paint is dry you can put the lid on top of your candle. Now the graham crackers.
The one that's going to go at the bottom do not glue that to the candle but the one that goes on
the top can be glued to the lid. I used my Cricut to cut out some vinyl that has these cute little
faces. I'll link the Etsy seller I bought these from down below for you guys. You can use a paint
pen instead or some felt and glue it on using some hot glue. I just don't know if it might come off
with the flame of the candle. Now my son he kept bugging me as I was filming this. He just wanted
It's fake fake crackers they're not real.
I put on all the little face features. I did one that had like fudge with the vinyl and then I did
one that didn't have any fudge. There's a slightly different way of doing this if you do not want to
use the Model Magic. I got a different candle this time. I put the little face on the front of it and
this time instead of using the Model Magic I'm going to be using coasters from Dollar Tree.
All you have to do is paint your coasters. The good thing is they take paint really really well.
Then get a finer brush to paint the details of the graham cracker on top of your coasters.
I painted the edges of the candle brown. I'm doing the same thing as the other candle. I place a
coaster on the bottom and then I'm going to put the candle on top of that. Then the graham cracker
that's going on the very top of the lid I glue down. I didn't glue down the bottom graham cracker
because I don't know how the candle heat is going to react with the glue. It might melt it and I
don't know how it's going to react with Model Magic. So you can display it as a graham cracker
but when you light it you just go ahead and you remove all the other pieces. For video purposes
I do have the candle lit on top of the Model Magic but like I said I would remove it from
the bottom graham cracker. With the coaster though it should be okay with the candle on top of the
coaster. Aren't these just so cute? I love the way that these turned out and they're really easy to do.
For this next hack you're going to need the mini cups from Dollar Tree, mini styrofoam balls they
come six for a dollar and 25 cents, and then some spackle. Dollar Tree does carry spackle but if
you're familiar with my channel you know what I'm going to say. I love the dapp patch and paint
spackle. You get more bang for your buck and you don't have to mix it with water to get the perfect
consistency. Place a styrofoam ball inside of a cup then take another styrofoam ball and cut it in half.
You're going to use one of those halves on top of the styrofoam ball that's already inside of the
cup and you need this to create height when you're making your little whipped cream design. So you're
going to need an icing tip. I'm using this large drop flower tip. Dollar Tree does carry icing tips
they're just not reusable so I prefer to get mines elsewhere. You're going to place your spackle
inside of a piping bag with that icing tip. You're going to treat this like it's icing or some whipped
cream. You're just going to squeeze it right on top of the little cups. Now I'm going to take some fake
sprinkles. I'll link these down below for you guys and I'm just going to pour it on top of the
spackle. You don't really want to use real sprinkles because what I've learned is they eventually bleed
into the spackle. Then I got this red and white straw from Dollar Tree. It's just a paper straw and
I'm going to cut a little piece that I'm going to place inside of the spackle. I printed out and
glued these little Starbucks Merry and Bright tags to the front of my cups. I'll link the seller I
used down below for you guys but you can find these for free if you really want to just going
into Google. I'm turning these into ornaments and the way I do that is just by getting ornament
hooks and hooking them through the spackle. So just poke through the spackle and you're good to go.
Hang that on your tree. These are just absolutely adorable. They turned out so cute and obviously
you might not want to go with the Starbucks look so you don't have to do that. You don't even have
to put anything on the front of the cup. I love how these turned out and you don't have to put
them on the Christmas tree. You can use them in a tear tray. You can use them in a hot cocoa bar as
a decoration. These are so easy to make and cute. Now one of my favorite crafters to watch during
Christmas is Creative on the Cheap. She does Christmas movie themed tutorials using mainly
Dollar Tree products and a few years ago she made Snoopy's house and since then I've always
wanted to DIY one of my own. She used entirely different products than I'm going to be using
but I highly recommend checking Courtney out for Christmas DIYs. So I'm going to be using a piece
of foam board. Lately I have been using foam board to make some amazing DIYs and I'm just
using one piece for this project from Dollar Tree. I'm not going off of a template or anything. I'm
just figuring out how big I want my house to be. So you're going to need to cut the front and the
back of the house. Both will be the same type of pieces. Then the sides of the house and then the
roof of the house. So all you have to do is trace these pieces onto one piece of foam board and then
you are going to cut it out using a razor. So I'm going to share with you guys in a moment
the exact sizing that I used but you can always change this around. If you want to make this jumbo
you're going to need more foam board but you can definitely make this a huge Snoopy house. We're
the picture and then just printed it out. So what I'm going to do is I'm going to place this image
on top of a piece of foam board and then I'm going to trace it on that piece of foam board.
And I'm just using a pencil to do this directly over the image. What happens is it makes like an
indent inside of the foam board so you'll be able to see the silhouette of Snoopy. Once I have that
silhouette I then go ahead and cut my Snoopy out. There's so many different ways to make your Snoopy.
You don't have to do it this way. You can always just use the picture directly and just glue it
down that way. You can get a regular piece of paper and paint it or just cut out his silhouette
and paint on top of the foam board. So many different ways to do this. Now here are the
measurements for the house. I did two pieces like this for the front and the back of the house.
Then I did two pieces like this for the roof of the house and then two pieces like this for the
sides of the house. I'll link these measurements down below for you guys. To bring color to my
house I'm using craft foam and I got the bigger pieces from Hobby Lobby for $0.99 and then the
smaller pieces I ended up using for the lights on the house was in this big pack from Walmart for
$5 and I think it was 90 something cents something like that. Anyways what I'm doing is I am taking
my pieces of foam board placing it on the craft foam tracing it out and then cutting those pieces
to glue on the house. Now you don't have to use craft foam. If you want to keep this so cheap
or you're just using one Dollar Tree product use paint. You don't have to use the craft foam like I
did. There's so many options. You can use felt instead. You can use wood instead. It's completely
up to you but I went the route of using craft foam. For my Snoopy I cut out the printed image
and I glued it to that piece of foam that I cut out that looks like Snoopy and on the other side
I'm going to do a craft foam Snoopy. Again you can do different things. You don't have to go the route
that I went. Just use your imagination. Use supplies you have on hand if you want to go a different
route. Now it's time to start gluing the house together. If you use the measurements that I used
you're going to have leftover pieces of foam board. Cut those into smaller pieces and you can use those
smaller pieces as support for the walls of your house. So as you glue the main pieces of the house
together take those smaller pieces and glue them wherever two bigger pieces of foam board meet as
support. It really does help a lot. To get Snoopy to lay center on the roof of the house I had to cut
his ear off. So after I glued down Snoopy I then glued down the ear on one side of the roof and
then I made a different ear for the other side that's going to be the craft foam. Now it's time
to just really have fun with this. I'm using different pieces of craft foam to start detailing
the house. So black craft foam to detail the door, the little like lines that are going through
Snoopy's house. I just glue those directly to the house. I then went in with some red paint because
there are parts where there's white foam still showing through so I covered that up with just
some red paint. Sorry I can't talk. I then take some black craft foam and I cut out the string
of the string lights and I glued that on the roof and on the side of the house and then I took some
colorful craft foam and I cut out the Christmas lights. I went with colors that were in pictures
I saw of Snoopy's house. Now as I was making this I saw pictures of Snoopy's house in A Charlie
Brown Christmas and I'm telling you guys I love A Charlie Brown Christmas. My bathroom is themed
after that year after year. I love that movie and I never realized that the house in A Charlie Brown
Christmas is blue but then all the stuff that you buy for Charlie Brown during Christmas time
Snoopy's house is red. Again in the movie though it's blue. Don't believe me? Google it. I just don't
really understand it. Anyhow it's not that big of a deal but it's something that I noticed. So
basically I repeated these steps on the other side of the house and then on the front of the house I
made smaller lights that could fit there better and then with the Snoopy that was on the other
side I just cut out little pieces of craft foam black craft foam to get his features and this is
how it turned out. Oh my gosh I love it so so much. Like I said I have a Charlie Brown themed bathroom
and this is where it's going inside of the bathroom. I realized after the fact that I
probably should have made the house a little bit smaller because where I wanted to place it
it's a little too big so I have to do it where the craft foam side is showing and I actually like
the side where Snoopy's printed better but this is so cute and I'm just so happy I did this. I want
to do more Charlie Brown DIYs because Charlie Brown stuff is expensive. This is an easy hack.
Right now Dollar Tree has these candy dishes. If you have a candy theme in your house, a peppermint
theme, a gingerbread theme this is a great hack to do. You just take some command strips and put
them on the back of your plates. Now the plates are really lightweight so if you have the longer
command strips like I do you can actually cut those in half and use one for each dish rather
than using two for each sorry each dish. So all I'm doing is I'm placing this on the wall that's
around my Christmas trees. I actually don't have a normal sized Christmas tree this year. I just
have some smaller Christmas trees. Well anyways I place these around the walls and it's just so
pretty inexpensive and easy to do and I've done this before in the past with the spider plates
from Dollar Tree. It's just an easy hack. This is such an easy hack. Window clings from Dollar Tree.
You can put these on so many things. If you get a clear glass from Dollar Tree and want it to look a
little bit more Christmas like, take the window clings and place them directly on the glass.
Put some flowers inside of there. So easy to do and instantly makes it have that Christmas feel.
Maybe you have some candles that you would like to spruce up a little bit more. Take the window
clings and just put them directly on the candles. I have these candles. They're Christmas candles but
they don't have any Christmas decorations on them. So I took the window clings place them on and now
I have a Christmas vibe to my candles. Another thing you can do is use the window clings on top
of your refrigerator if you're trying to decorate a little bit more inside of your kitchen. You can
place the clings or stickers directly on the refrigerator or you can make magnets out of them.
You just need some magnetic strips or the little magnets that Dollar Tree carries. So all I'm doing
is I'm taking the magnetic strips and I'm going to cut them down into little pieces that I can
place directly on top of my stickers. If you don't want the sticky side of the window cling stickers
to be exposed, you can always place them on a piece of paper or craft foam like I did. Then cut
around the sticker. Then place the magnet on the back of the foam or the paper whatever it is that
you use and you can do it that way instead. There you have it Christmas magnets for your refrigerator
using Dollar Tree window clings. This is a hack I've shared on my channel for years now because
it's so nice. You can use the duster patch from Dollar Tree to create a fake snow look. So on top
of my fireplace I'm going to be putting down these dusters. I'm just going to put a bunch of them until
I cover the entire top of the fireplace. Now my fireplace it's not real fire up there or down
there. It's a fake fire and I never put the heater on. I just put like where it looks like the fire's
going. Anyhow I'm going to place these pieces all on top of the fireplace and then I'm going to
pinch wherever two of the dusters meet. I'm pinching in these areas so that I can blend them in more
nicely together. You can even use the microfiber cloths that I used on the basket for this. It's
going to give a different look but you can go that route if you want to use less and this is just so
easy to do and it looks absolutely gorgeous. Like I said I've done this for many many years
in different styles of Christmas decor and it just looks great. Let's decorate on top of the
dusters. Those little plastic houses that Dollar Tree carries. If you don't like the plastic look
and you want to make them look more chic, paint them a solid color. Go with any color you like.
I'm going to be going with white and I did have to do a few layers of my white acrylic paint to
get the perfect look. This is way easier to do with some spray paint. Once the paint is dried
that's that's all you have to do. You just have to paint it. Paint it a solid color whatever you like
instantly makes it look more high-end and chic. I put these on top of the dusters and I have this
really pretty village that's on top of the fireplace. So that's it for the video. I hope you
guys enjoyed. Again thanks to SimpliSafe for sponsoring this video and being such a big
support to the channel this year. Anyways I will see you guys next time. Take care. Bye.
