DIY Platform Bed With Floating Night Stands (Plans Available)

DIY Creators
91 followers
7 Video Views·Dec 8, 2022
Picture yourself walking into your room and absorbing the feeling of accomplishment.
This is the feeling I get when I walk in this space.
Let me take a few seconds to give you the detail on this build.
The majority of this platform bed was made entirely from 8-inch lumber from your local
hardware store.
Featuring two floating nightstands with the idea of saving space and not jeopardizing
functionality.
The nightstand not only has a place to store your lamp, but on the inside it also has a
place to store a book, an iPad, and anything you want within arm's reach.
And also, let's not forget the electrical outlet providing you two ports to charge your
lamp or any device.
And one of my most important features of this build is the on and off switch that controls
the undermount LED puck lights.
And with the added lights, this gives off a luxury feel within the space.
And with the whopping 116-inch headboard backed with LED strips to set the mood in your space.
Hey, what's up guys?
I'm Glenn with DIY Creators and today I'll be making a modern platform bed for the bedroom.
I've actually been getting a ton of requests to make a bed and I actually needed a bed.
So, you know I like lights, you know I love LEDs, and I've had to find a way to incorporate
them.
And with this build, this is basically a temporary bed for me.
And what I mean by that is there's a lot of work I need to do in this room.
I've got to paint the wall, I've got to replace the floor.
There's a lot of things I want to do.
And this bed is not what I had in my dream bedroom.
But it's a space fitter right now and it should work for the time being.
I actually like the way this one came out and hopefully you guys are interested in
this one.
So, if you check down in the video description, you should see all the information about the
bed, how much it costs, and other details about it.
So, if you have any questions, you can check there or you can just ask me in the comments
and I'll get back to you.
And with that being said, let's do it.
For this project, you do not need a ton of tools.
But there is a ton of cutting.
And I would totally recommend a miter saw.
If you don't have one, maybe you can borrow one.
Maybe you can rent one from your local hardware store.
Your next option would be using a circular saw.
And you'd probably want to use a jig to cut those just so you have some consistency.
I do have a max cut 2 jig that I made a while back.
So, you can check that out.
Or you can check out any one of the circular saw cutting guides.
And that should help you along with this project.
There's a ton of cutting with this project.
And the majority of it is all repetitive.
So, I'm just going to make all my cuts.
And then you can see here's all the finishing pieces that I've cut down to size.
And now that everything is cut, I can now move on to sanding.
Now, you only need one sander for this project.
But since I had the luxury of having two of them, I decided to put both of them to use.
I used one with 80 grit sandpaper on it.
And then I used the other one with 120 grit sandpaper on it.
Now, keep in mind, if you have a thickness planer, then this is probably the time to use it.
Now, these lumber come pretty rough.
So, there's a ton of work prepping them and smoothing them out.
And I do this process over and over again.
And then I finally finish sanding them off with 120 grit sandpaper.
I'm not sure how well this works.
But I was doing everything in my power to speed up the process.
For the bed frame, I'm going to use a glossy latex black paint.
To apply the paint, I'm using a high-density foam roller.
And this gave me the best chance of getting a good finish
without pulling out the paint sprayer.
For the backing on the headboard, I used plywood.
And those only come in 8 foot sections.
So, the thing is, I needed to extend those.
And I used plywood, glue, and also pocket hole screws
just to extend it to the width that I needed.
The bed frame is painted black.
And to keep a consistent look,
I painted the bottom part of the headboard as well
so that it blends in.
At this point, the plywood is pretty heavy on its own.
But the more and more I add wood on it,
it's going to get heavier and heavier each time.
So, it's important to secure the plywood in place
as you add the pieces.
Of course, having a helping hand with a tow
to make your job a whole lot easier.
But if you don't have the luxury of that,
the clamps work just fine.
After adding all the lumber, the headboard became extremely heavy.
If I had to guess, it was probably between 300 and 400 pounds.
Being that I'm so close to the edge,
it's best to pre-drill so that I don't split the lumber.
To secure the lumber to the plywood,
I added two screws per board, approximately every 24 inches.
Due to the size of the headboard,
your eyes will be drawn to it more than anything else on the bed.
So, in this case, do the design the way you like.
Maybe you want to carry the wood across
the entire width of the plywood.
In this case, for me, I wanted to see that line
going back and forth.
I wanted that staggered look.
I'll just continue the same step over and over
until I get to the last row.
For the finish, I use a dark walnut danish oil
applied with the rag.
Now, if you like the color darker,
you can always add more and more layers,
but I was pretty satisfied with the tone of this one.
Now, let's move the focus over to the floating nightstand.
Each nightstand will have the same setup.
And to make life a little easier,
I'm going to cut out the junction box opening
so that we can install those later on.
Using a jigsaw will make quick work of removing this section.
If you don't have a jigsaw,
you can always drill a bunch of holes
and then chisel out the rest.
If you feel like you like a challenge
and you want to do this by hand,
you can always use a coping saw.
If you go this route, it's a lot of work,
but it's still an option.
To assemble the nightstand, I'm going to use dowels.
Now, dowels can be frustrating to work with
because you have to be pinpoint on
to make sure everything line up.
You should mark both pieces of wood at the same time.
That way you have a reference when you use a dowel jig.
These dowel jigs by Rockler
actually have a center line on them.
If you place the center line on the marking,
you'll be more than likely to get a straight hole drilled.
Before applying glue, it's always best to test
to make sure everything fits well.
As a reminder, I mark both pieces the same
so that I know which two go together.
To ensure that my accuracy was on,
I just marked, drilled, marked, drilled,
and I did the same thing all the way around
for each side on each box.
I wasn't sure about the quarter inch dowels,
so I decided to beef those up with three eighths.
And this part is pretty self-explanatory.
I'm just going to add a ton of glue in the hole,
on the joints, and also on top of the dowels as well.
And after this part is done,
it's time to bring out the clamps.
Once the glue dries,
that's where the majority of the strength comes from,
so you want to be sure that you clamp this down
as tight as possible.
If you don't build often enough
and don't feel the need to own clamps,
what you could do is use screws
and wood glue at the joints,
then use wood filler to cover the screw heads.
My intention is to have the end table
inch or two inch lower than the top of the bed.
Next, I'm going to measure
and mark the inside of the end table.
Then I'm going to drill a few pilot holes
going all the way through the headboard
just to mark the backside of the end table.
I wanted this switch to be somewhat hidden,
but also in a location that I can get to it easily.
And this switch is meant to turn on the puck light
that's going to be below the end table.
The light that I plan to put here comes in a kit,
and it also has a tail on it.
So what I'm going to do to keep the wire hidden,
I'm going to drill up but at an angle
so that the wire come out through the back.
So at this point it's a good idea
to just mark everything while the end table is in place,
even the outlet.
And with the end table removed,
I can now drill all the holes out
for the bolts to pass through.
The last bolt I just drilled
actually fell into the opening of the outlet,
so I had to redo that one.
The end table is meant to be removable.
This way you can remove it
and move the headboard around at will.
Notice I have tape on my drill bit as an indicator
so that I didn't exit out the other side of the table.
This is the location that I plan to put
the on and off switch for the puck lights.
Since I can't get my drill to drill in from the inside,
I'm going to attach a piece of wood
and drill in from the back side.
And this way I can avoid any major tear outs.
I drilled a three-quarter hole,
but it seems like it's a tight fit,
so I just have to wobble out the hole
just a little bit to accept the switch.
After sanding and applying the danish oil
as I did previously,
I'm now going to add wipe-on polyurethane
as a top coat for this finish.
After applying the first coat of polyurethane,
I then went back with a 400 grit sandpaper,
sand that down,
then I applied one more coat onto it.
You can do it a third time to get an even better finish,
but I was happy with the second coat.
Since I wanted to achieve a glowing effect
behind the headboard,
I decided to add some strips of wood going around.
And this would serve a couple things.
One is a resting area for the LEDs to sit,
but it also helps kick the bed off the wall
so when I plug the power cord in,
it doesn't interfere with the headboard.
Now that I have the headboard in the room,
I'm going to add the electrical wire,
and that's going to go from one outlet
to the other outlet.
Here's the puck light
that I've shown previously in the video.
I'm just going to cut the plastic connector off of it,
pass the wire through the hole that was drilled,
and then screw the light into place.
These LED puck light comes in a kit,
and I really like the low profile of them,
and I'll have links to these
down in the video description.
To wire up the on and off switch for these,
I'm going to use some spade connectors,
which are called push-on connectors
or many different names.
I terminated those to a piece of wire,
pass the wire through the hole,
and then I can insert the switch.
So getting the switch in the hole
was a pretty tight fit,
but I made it work.
I left all the wires pretty long
so I can pass them through the pre-drilled hole
that was done early on in the video.
And now that all the cables are passed through,
I should have the wiring for the puck light,
the electrical,
and also the wiring for the switch.
And after getting the end table under the headboard,
I can now install the bolts.
Now I can fasten all the wiring down
and keep everything neat and out of the way.
Before screwing the wood into place,
I actually tested out the LEDs
just to see where I get the best glow,
and I found that placing it one inch away from the edge
actually gave me a glow that I actually like.
Turns out the LED strip was pretty close
to the size of the headboard
going around the entire perimeter,
so I didn't have to add or cut any off.
I drilled a half inch hole,
then forced the connector through the hole.
I probably could have used a different method here
because I had a tough time keeping the cable flat
while it was passing through the hole.
Since I don't have a ton of options,
the receiver was sitting in this general area,
allowing me to pass the IR receiver
just outside the hole.
And to keep everything in place,
I'm just going to apply a ton of hot glue.
To create a plug that I can plug in a wall,
I'm going to take an old extension cord,
cut off the end,
and I'm going to use that wire
so that I can make the connection.
And since I'm actually hiding
the two outlets behind the bed,
I need to bring some outlets
back to the front of the bed.
So I'm going to try to keep these hidden as well.
But the cool thing about these outlet
is they actually have a USB port on them.
These outlets are fairly simple to hook up.
You have a green wire
that goes to the green terminal.
That's your ground.
You also have a white wire,
or in this case, it's a yellow wire,
and that goes to the silver screw,
which is your neutral.
And the next wire you have left over
is the black wire
that goes to your gold terminal.
That's your hot leg coming in.
This old extension cord that I have
actually have two white legs on it.
So I need to do a continuity test
to figure out which one is the hot leg
or the neutral.
Once I find the hot leg,
I colored it with a black Sharpie.
So the outlet on the far end
only has one wire at that location.
This actually has two wires.
The one that comes from the other outlet
and the other one that goes to the wall.
And since I'm in the US,
I'm only going to address the outlet
that I'm most familiar with.
If tinkering with electricity
is not really your thing,
what you could do is work on the circuit
with it unplugged or powered off.
Once you've wired it up,
you can use an inexpensive tester
like this one to check
if your circuit is correct
or is incorrect.
It will also tell you
that if you hooked up a wire backwards
or if you have an open ground
or a hot or even a neutral.
Now it's really important
that you use a junction box
so that nothing gets out of place.
Now that I'm done with the high voltage,
it's time to work on the low voltage.
And here I'm going to use a terminal block.
Now I was planning to explain
what I was doing here,
but then I realized
that after I finished wiring this up,
it actually looked pretty complicated.
So I'm going to create a diagram
just to give you a basic
and simplified version
of what I'm doing here.
Now, the reason why I went this route
because I wanted to easily
disconnect the end table
if I needed to move the bed
at a later period,
because I will be getting rid
of this bed at some point.
So to clarify this area,
I have my power cord here.
This will get plugged in the wall
and this will give power to my outlets.
Here I have a transformer
that would be powering the LEDs
and also the plug lights.
I mean, this headboard is really heavy.
So I'm really surprised to see
how the end table hold this up
like a champ.
After the headboard goes up,
I won't be able to get behind it
because it's so massive
and so much work
that I have to do to get there.
And with the headboard being so heavy,
I used a three inch screw
going through the headboard
and right into the wall.
I only have one in the middle,
but if you want to be extremely safe,
you can always have three of them,
one in the middle and two on the end.
Once you attach the bed frame,
it ain't going anywhere.
To hold the bed frame together,
I'm going to use these thick brackets.
And the biggest thing about this design
is being able to take it back apart.
And that's why I designed it the way I did,
because at some point
I'm going to get rid of the bed.
This is just a temporary fix for my room.
So somebody is going to get this bed
and I'm going to easily get it out of here
by taking it apart.
In addition to adding the brackets,
I was planning to add dowels
where the two pieces of wood meet,
but it was so strong,
I decided to go away from that.
Now, after adding the bracket,
you can see it interferes
with the piece of wood I had.
So I had to notch that out
just so I can get the wood to fit.
I wanted the support piece
to be flush with the top part of the bed frame.
Using a combination square was a huge help.
After setting the depth going around,
I can then take the combination square,
eliminating the use of a tape measure.
After attaching the piece
along the foot side of the bed,
that actually helped out
when it comes to lining up the center beam
because I didn't have to measure
or find where the center was.
Somehow, I forgot to pick up
enough corner brackets,
which I planned to add here in the middle,
but I didn't want to break away from the project
and go pick up any,
so I used these L brackets
and these actually worked out just fine.
I just staggered them one on one side,
one at the bottom and one at the top,
and then I did the same thing
on the opposite side.
I only put one full day of work
into this project.
The other days was like in small spurts,
so I actually felt like
I was never going to get done
with this project
until I started adding these support pieces.
I added two screws per connection point,
that would be at both ends
and also in the middle.
To secure the lip of the bed to the frame,
I'm going to use some corner brackets
on the inside and also on the outside.
I'm going to use a total of four per side.
Now, all I have to do is line it up
and then I can move on
to screwing it from the inside.
Well, if you ask me,
it looks strong enough.
And you're probably wondering,
what do I do at the end?
Well, here I'm going to use a mending plate
and I'm going to use this plate
to attach it from the bottom.
And this is a perfect situation for that
because that keeps the two pieces of wood
flush with each other.
I also added some smaller bracket
that will secure the lip from the inside.
After adding the bracket to the outside,
this provided the strength
that I was looking for.
Now, you cannot see this bracket
when you look at the bed,
unless you bend down and look under it.
But one thing I could have did
was actually spray painting them black
so they would blend in better.
Now, it did take a lot of fine tuning
and maneuvering to get the bed fine tuned
so that I have the proper spacing
on both sides.
Now, all I have to do
is attach the bed frame to the headboard,
throw the quarter inch plywood on top,
just throw a few screws in it,
secure that in place,
throw the bed on there,
and we're done.
I really had to cut my victory dance
out of this one
because I just went crazy.
I was so happy this project was done.
Hope you guys like this one.
Hope you like this one.
And that's it for this one, guys.
Be sure to like, subscribe,
and I'd love to hear your thoughts on this one.
If you have any questions,
just leave them down in the comments,
and I'll get back to you as soon as I can.
And be sure to follow me on Instagram
at DIY Creators 2015,
and I want to give a big shout out
and thank you to my friends over on Patreon
for supporting the channel.
If you're able,
please consider supporting the channel as well
so we can continue to make content like this.
Have a good one, guys.
