If you have been working on sublimation projects for a while, you may think that you can only sublimate on polyester. Well. we're here to tell you that you CAN sublimate on 100% cotton! Wow! Be sure to check out this video and learn how that's possible. We will show you just how to make sublimation crafts on 100% cotton, opening up a whole new selection of materials to use with your projects. This is a must watch for sublimation fans.
💥💥Get Thousands of Cut Files, Fonts, Printable Guides, and more - https://makersgonnalearn.com/join . Use code “YOUTUBE” at checkout for your special discount!💥💥
Some of the links provided are affiliate links. Makers Gonna Learn is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program. As an Amazon Associate, we earn from qualifying purchases. This means, at no additional cost to you, we will earn a commission if you click through and make a purchase.
Hello everyone, welcome back to Makers Gonna Learn.
My name is Lauren and I'm a craft producer
here at Makers Gonna Learn.
And today I'm bringing you something that is new
to the sublimation and crafting world,
or at least it is to us.
And that is DTF film and adhesive,
which means direct to fabric.
So what I'm gonna be teaching you in today's video
is we're going to be using our sublimation printer,
printing off an image, adding the DTF adhesive,
and sublimating on 100% cotton.
Y'all, this is not a joke, it is possible.
And today I'm gonna show you how.
Now I'm going to go overhead and show you all the materials
that you're gonna need for us to get crafty today.
Now we're gonna go over the materials
that you're gonna need for this project.
Obviously, because we are sublimating on 100% cotton,
you are gonna need a 100% cotton T-shirt.
The key to sublimating on 100% cotton
is this DTF transfer film and adhesive.
Now what DTF is, is it's direct to fabric,
so it's very similar to direct to fabric printing.
This is what the adhesive looks like.
It is a powdery substance, so you are gonna need a bin
or something to put that in.
You're also going to need a piece of copy paper,
and that's to help this film pull through
your sublimation printer.
You're gonna need a measuring tape
to measure the area you're working with on your shirt.
You are going to need some masking tape,
as well as your sublimation printer and a heat press.
These are obviously key to this project.
Now we're gonna head over to Makers Gonna Learn,
and I'm going to show you what file we're gonna be using,
and then we're gonna actually working out of Canva today,
and I'm gonna show you how you can upload
your Makers Gonna Learn files into Canva
to print on your printer.
Now that we're here at Makers Gonna Learn,
the files that you can use are any print and cut image.
We have a print and cut section right here
that you can go to and pick out,
but I know exactly which one I'm gonna be using,
and I'm going to be using one that's called Landscape.
So I'm just going to search for that.
As you can see, there are lots of beautiful landscapes
that we could be working with.
We're gonna be working with Landscape 1.
So what you're gonna do is you're going to download that
onto your computer.
You're gonna come over here.
It's going to open up as a PNG.
Now I'm gonna keep this right here,
and I'm going to go back to Canva.
I want to be working with an 8 1⁄2 by 11,
and I'm going to create new design.
Once that pulls up,
because I want to upload that image into here,
I'm going to go to Uploads.
Now you can see I've already uploaded it,
but what you can do is you can open this up.
You can drag and drop this over here,
and it is going to automatically upload for you.
So I'm going to click this image.
I like to move our, scale this down on the sides.
It's not necessary.
I just think it works.
It helps me work a little bit better.
And then I'm going to size this as large as I want.
Now I'm working with an adult size, extra large t-shirt.
So I want to get it as big as I can.
Now the film we have is only 8 1⁄2 by 11,
so with this design, this is as big as it can get.
Now one thing I want to make sure to let you guys know
is with this image, I can go ahead and print it as is.
However, if you are working with text,
you need to make sure that you mirror your image.
So I'm going to click on my image,
and then if you're working with text,
once again, you're going to hit Flip,
and this is where you can either flip it horizontally
or flip it vertically.
So we are going to flip ours horizontally.
You can flip yours horizontally.
Now if you're wanting your text to run up and down
on your piece of paper,
then you will need to flip vertically.
So just keep that in mind.
You want to mirror your image if you are working with text.
So I'm just going to position this.
Once you have it positioned, you are going to share it.
You are going to click Download.
It is going to download as a PNG.
I'm going to click Transparent Background, hit Download.
As you can see, it's downloading here in the corner.
Then I'm going to pull it up here,
and then I'm going to, from this screen,
I'm going to print this.
So I'm going to be printing it
from our workforce printer, which is this one.
Now, here's where you need to change.
I think that it works best
through all of the testing that I have done.
If you choose Photo on Glossy Paper,
then from there, you are going to change your media
and quality, make sure it is on Best,
and then your media type is Photo Glossy Paper.
Once you have done that, you are ready to print.
Now, before you print, for me,
I have tried sending this DTF film through our printer
just by itself, and through all of the testing,
it has not worked for us.
The best results that I have gotten is when you take this
and you actually tape it on to a plain piece of paper.
So we're going to go overhead,
and I'm going to show you guys how you're going to do that.
So as you can see, our packaging tells us
that print side is on this matte side.
So you're going to want to make sure
that you tape this with the matte side facing up.
I know it's going to be hard for you guys to see,
but I'm going to line this up as close to the top as I can,
leaving a little room for the tape
to stick to the copy paper.
I'm going to take my masking tape, pull it off,
and then all I'm going to do,
while that is still laying on a flat surface,
I'm going to try my best to grab as small of an edge
on that transfer film as possible, push it down,
and then we're going to pick both of them up,
turn it over, and then fold this
and get it perfectly flush with our copy paper.
From there, you need to know how your printer works.
Ours specifically works with the side
that you want to print on facing down.
So we have to load our paper with the copy paper facing up.
All printers work different.
I'm not saying this is how yours works.
You need to test on a plain piece of copy paper first,
put an X on one side of your paper
and see which side your copy paper will print on.
So do that, test it first,
and then you're going to put your paper in
either up or down, depending on how your printer works.
So now I'm going to send this to the printer
and we'll be right back once this has printed.
Now that we have our transfer printed,
we are going to add the DTF adhesive.
So as you can see, we've been testing and working.
So I've already got some in there.
So what I'm going to do is I'm just going to place my film
in here, trying your best not to cover,
not to touch your ink.
And I'm just going to work this around,
pick up the bottom and move this adhesive around on my image.
As you can see, this adhesive is sticking to the ink
and that is exactly what we want.
So I'm just going to pick it up and move it around
and make sure it gets really, really good and coated.
From there, I'm just going to give it
a little bit of a shake.
I like to hold it up to the light
and make sure that there are no spots missing.
And if I see a spot, like there's a spot
up around the top of this mountain
that I think could use a little bit more adhesive,
you can place it back in.
And we're just going to take some of this
and sprinkle it on the top.
And then I'm just going to pick it up
and move it around that area again,
and then dust it off one more time.
Now that we have our DTF powder on here,
what we are going to do is we are going to cook it.
And I say that in quotations, we are going to,
and you're going to be able to see the difference.
We're going to place this under our heat press,
not with the heat press touching it.
We don't want the heat press to touch it.
And what it's going to do is these little granules
are going to really sink into that ink
and really adhere to that ink.
And it's going to change color.
So you want to cook it so that you don't have
this powder sugar looking substance on here.
So we're going to place it under our heat press.
We're going to lower our heat press.
Now this may take 30 seconds to a minute and a half,
but you can lift your heat press that you're working with.
Ours, with it being a clamshell,
the top plate is at an angle.
So that back portion gets cooked a little faster
than the front.
So what I like to do is check it,
and it's nowhere near close.
So we're going to put it back down
and then I'll turn it around.
Now I will tell you, we are working at 385 degrees.
That's what we're going to be pressing our shirt at.
So make sure your heat press or your heat source
is working at 385 degrees.
So now you can really see the color and the detail
in this beautiful piece of art
that we're going to be pressing onto this shirt.
Cooking it really brings out those colors.
Before it may, if you have a lighter image,
do not fret if you feel like, oh, these colors aren't right,
because once you get this powder on here
and you get it cooked,
those colors are really going to come through.
So once we have cooked our image,
what I like to do is I like to give a good press
to my shirts to get all of the wrinkles out.
So I'm just going to give this shirt a press
for about 10 to 15 seconds.
Can you all tell what my favorite color is?
So once we have gotten the wrinkles out,
I'm going to make sure my shirt is lined up where I want it.
Once I have all the wrinkles out,
I'm going to take my image
and I'm just going to lay it down on my shirt
where I want it.
Then I'm going to cover it with butcher paper
and I'm going to press this for 30 to 35 seconds.
Now I have tried so many different times.
I have tried different temperatures.
I have tried warm peels.
I have tried cool, cold peels.
What I have found works the absolute best is pre-press,
make sure that your image is cooked great
and then pressing for 30 to 35 seconds with a cold peel.
You do not want to peel this warm.
The results that I have gotten are not good.
So what I'm going to do is I'm going to pull this off.
Now I suggest you wear heat resistant gloves
because it may be a little hot,
but I'm just coming from there to here.
I like rubbing this on a cold surface
like this marble countertop.
So I'm just going to kind of rub this around.
That takes that heat out of this image
or out of this area a lot faster.
So I'm going to rub it around
and then what I'm going to do is I'm going to take it,
I'm going to flip it over
and then I'm also going to rub it around on this side.
Once this is cool to the touch,
we are going to come in here
and start peeling up our image.
This is always the nerve wracking part for me
because the first couple of times that we did this,
it was terrible and it just did not peel
like it was supposed to.
So it always makes me super nervous to peel this off,
but y'all look at that result.
How beautiful is that?
And on 100% cotton t-shirt.
I hope this has helped answer some of your questions
because this is a new product to the sublimation world.
Direct to fabric printing has been around for forever,
but as far as using your sublimation printer
for direct to fabric printing, it is still very new.
Now, one thing I need to make sure you know,
there is a difference with direct to fabric printing
and sublimation.
You still can't print white with sublimation
like you can with direct to fabric.
So you are gonna have to use lighter colors
or white or cream or bleach your shirts out,
but the results are still amazing
on 100% cotton t-shirts.
Now, if you have more questions about using the DTF film
and the adhesive, we're actually gonna be going live
on Monday to see what all we can actually use this film
and adhesive on with sublimation.
So make sure you tune in on Monday, August the 15th,
to ask us all your questions.
We will be here to answer them live
and I can't wait to see you guys there.
Bye.