Do you know what it's time for? Yeah, it's time for another episode of...
It's been far too long since we've been able to do one of these episodes, and yes, I actually have
a box of, well, like 547 pencils down here. I mean, we're just, we've got a ton of these things.
So anyway, pretty excited about it, but how do we turn this little pencil into a bow? I think by
gluing a ton of them together, right? So we're going to glue a ton of them together with epoxy,
but we need a form to put all of this in first. So what I'm going to use as a form is this PVC
pipe. It is a SDR 26, so it's a little thinner than like normal schedule 40, right? That way
I can heat it up a little easier, hopefully, and mold it into the shape of one of these bows back
here. If I can use one of those bows as the form, as the airplane goes past, maybe I can put a ton
of pencils in this form, glue them all together, and maybe make a bow out of it. Well, a bow is
a series where we try to make bows out of things that really should not be bows. Let's get right
into it.
Okay, so we have got both of these up in the heat box.
It's going to heat it up a little bit, not to the point of being able to shape it probably,
but it'll make it hot enough that it'll be much easier to shape it with heat gun and
I don't have to heat it from nothing.
Secondly, I'm making a six foot bow and a four foot bow out of that 10 foot piece of
PVC.
I'm going to grab a 10 foot two by four actually, I kind of changed my mind on this, and I'm
going to cut that down to the shape of the two different bows I would want, and then
I'm going to try to heat that PVC so I can bend it around that two by four, creating
a form that the glue can go in, because the glue against the PVC won't stick, and so I
can put the glue in there, base layer of glue, a bunch of pencils, and more glue, and it's
basically going to be, well I guess it's epoxy, it's going to be basically an epoxy bow, and
hopefully the pencils will add a little bit of rigidity.
So I'm going to call another audible here.
That two by four was an eight footer, not a 10 footer, so I wasn't going to have the
length I needed, and so I'm just going to grab some one by twos, I'm going to form the
PVC around the one by twos, I'm going to make the pencil bow that same width, and then I'll
carve down the width of the pencil bow later, and I think that actually might help, because
that will allow me to lay all the pencils in completely straight into the form.
I don't know what I'm doing, but we're going to make it work.
This top side, pull the top side first, and then I'll do the sides.
The second one, boom, on the top, clamp it, and then I'll keep the top square while I
heat the sides, and pull the sides over.
Hup, you gave me.
No offense, I just started drinking and my body was saying, no dude, you need some water.
You need some water.
I was like, yes sir.
See, this is basically how it's going down.
It's kind of like concrete with rebar, right?
But we've got epoxy and our pencils is our rebar.
Concrete by itself is as weak as styrofoam.
But with rebar, it's about as strong as, I can't think of an example.
This should work.
I'll be able to trim the top off.
All righty, we are ready to go.
Got the forms done.
They squared off better than I thought they would.
Also, we're going to glue it up with EA-40 epoxy.
We'll mix those two together, and we've got our pencils.
I'm not sure how this is going to go, but let's do this.
It's a new day.
Let's get this going.
Oh.
Well, this is kind of absolutely crazy.
So back when I made this hockey stick bow, I had glued inside of the ridges, basically,
different pieces of fiberglass, and those popped right out super easy.
And I know this is some sort of fiberglass-graphite mixture on this hockey stick.
So I figured, let's throw that into PVC, and that'll be a perfect form for the bow.
The only problem is, looks like EA-40 and PVC are hugging tightly to each other,
which I could, and I've got plenty of recommendations to use PVC as an actual
bow backing, so you could just leave it on, right?
I'm going to see if I can take it off, though, at least on the small one first,
and then we'll move forward from there.
Okay, so this isn't coming off too well.
Actually, not well at all.
It's starting to chip the pencils, which is our structure.
Now, I do have a lot of extra material here, which is good, so that if I do chip a little
bit, it's not a big deal, because I did it a little wider.
With that being said, I'm going to run this through the table saw.
I'm going to try to be really careful.
The saw will have no problem with PVC.
Or should I do the bandsaw?
Since it is square on either side, it'll be easy to go through the table saw.
I'm just going to do half a saw blade to try to cut off that PVC on both sides,
and then see if the bottom will pop off.
So, let's give that a go and see if we can get this PVC separated from our pencil bow.
So, I did something extremely silly.
I didn't stagger the pencils.
On the smaller bow, I should have done every other pencil, cut one in half maybe,
and then left one full, and then staggered them all the way down.
That way, there wouldn't be a spot where they all come together,
like where the erasers are, and be weaker there.
So, that's what I've been finding, is those spots are a little weaker.
So, what I've been having to do is take more wood off where the meat of the pencil is,
and then where they butt together, trying to leave that as thick as possible.
With the bigger bow, I did do that, kind of.
The top row and the bottom row are staggered differently,
but I should have staggered every other pencil.
Like, I should have just put one here, half, one half, one half,
and that would have been the smartest move.
So, that's going to be our biggest challenge,
is maybe that it's going to break where those erasers come together.
I originally did not plan to leave the PVC on, but I can't really get it off,
and I think it's probably the only way this is going to work.
So, I'm going to try to string this little bow up right now,
and see if we can get it strung, at least.
I have more faith in the bigger one, but might as well give this one a shot.
And what is in my eye?
Okay, let's give this a shot.
I'm semi-skeptical with this little guy.
Ooh, we got some music.
Okay, if I hold it like that, I can see this top one is bending more,
like quite a bit.
So, I'm going to go ahead and remove one off this limb,
before I try to fully string it, so it bends a little more even.
I'm also only using the sander,
because I don't think it'd scrape off very well with a normal scraper.
All right, let's give this another go.
Come on, pencils.
Oh, man.
Should I go for it?
Get in there.
No way.
Oh, we got a pencil bow.
I think this one has a decent chance.
Snap.
Okay, well.
Wait, so why?
What?
I thought I staggered this one fully.
No, because look, these ones aren't even staggered.
You're not going to be able to snagger it.
Snagger?
I should have staggered every other one.
Maybe I'll need to get another.
Dadgummit.
Think about what I was saying, is if I,
if they were all like this, it would be hard.
Well, what I need to do is do one here, one here.
Yes.
One here, like you're laying tile.
Yeah.
But I was silly enough.
I was just like, sew these together.
That makes, because now you have all these weak points every single, I mean.
Yeah, every single spot's weak, and I just didn't think of.
Yeah, exactly.
I mean, I'm not strong, but.
But see, it's always those erasers.
There is one way to confirm that you have an official bow.
In order to confirm we have a pencil bow, this is going to snap.
They say you have a bow when you string it,
but I think you need an arrow through it too.
Hey.
All right, shot two.
Should I break it this time?
I guess.
Or we'll put some power through it.
Shot three.
The cool thing about this bow is it's practically indestructible.
Dude, let's go.
This gives me hope if I stagger it.
Indestructible.
Did you see how far I pulled that?
Did it break?
No, I heard something.
This gives me hope that if I get a bigger one,
maybe not even a big one, just maybe slightly bigger,
you can see the weak points staggered.
But you can shoot it.
No, no, no.
All right, Mr. Gary wants to try it.
Oh, yeah.
Holy cow.
It's got good drawing.
I'm getting like 25 out of her.
See, pencils are proven to be the strongest material when making bows.
I wouldn't do Osage, fiberglass, trash, all pencils.
I'm taking this to my next competition.
Let's retire this bow for the day.
Look at the set.
You see that?
You got where they come together.
All right, so I admit that I did not think very much before starting this build.
And I know there's somebody out there who was sitting there watching me put together
and stack all these pencils together saying,
this guy is just really dumb.
This thing is going to break.
And let me show you this.
Yes, it did break.
This bow broke into its respectable pieces.
Like, seriously, it's not that hard to...
Ow.
Well, you know.
It broke.
But seriously, without these being staggered, clearly it created weak points.
And the PVC is the only thing that really held it together,
which isn't that strong because I'm using this really thin PVC.
With saying that, I never even planned to use PVC as part of the bow.
But now, this little bow over here that we made,
since it works decently, that PVC is helping it out.
But if I can stagger this, then maybe I can make an actual stronger bow.
So originally, this was not going to be a pencil, PVC, willow bow sort of thing.
But that's what it's turning into.
We're still using pencils.
And instead of using full pencils, I went ahead and I took the erasers off.
And I cut them down to six inches.
And the best I know is that when I lay these in this new form that I already created,
I'm going to need to stagger each one.
And not even like every other one.
But I don't want one pencil to end in the exact same location of another pencil
because that could create the weakest point.
So we're going to stagger all of them,
kind of like you're laying down roofing or something like that.
And then that should hopefully make this stronger.
So now that I've put a little bit of thought into this and a little bit more effort,
hopefully we can get a full sized shooting pencil bow.
Hey, Kramer, would you recommend putting the 840 all over your fingers?
Absolutely, huh?
Guys, we are so close.
I've got the pencil bow.
Whoa, right here.
It's pretty stinking.
Oh, man, it's pretty stinking massive.
It's looking really good.
I'm going to take off the sides here, leave the back of the PVC on.
Man, we are within like two minutes.
You're within two minutes of seeing if this shoots really well.
Can't wait.
Let's do this.
No, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no, no.
You've got to be kidding me.
Well, there you have it, guys.
I threw everything I had at this bow.
We did get this little one to work.
I drew this bigger one to 20 pounds,
this one's about 15 or 17 pounds at full draw,
and so 20 pounds is pretty much the max for the pencil bow.
But a pencil will bow in a sense.
I'll count this one as a success totally
because we have a shooting bow that you're actually able to shoot.
I mean, it's very possible that the PVC
actually is doing more than the pencil on this pencil bow,
yet at the same time to have the majority of the mass be pencil.
I think that's pretty cool.
To have a bow that way.
So this one's going to go up on the Will It Bow wall of shame?
Fame?
Not sure which one to call it yet,
but we're going to retire this bow.
It's been an honor that you wanted to hang out with me for this time.
This is so fun to do,
and it's because of you guys that I'm able to do this.
So a pencil will bow.
Thank you so much for joining me today.
Hey, remember to stay shatterproof.
I'm for you guys.
I'll see you on the next video.
Thanks for watching.