What Presser Feet Should YOU Use To Tailor Your Clothes_

Anthony Rivera
67 followers
7 Video Views·Dec 3, 2022
A sewing machine is probably one of the most versatile things that you can buy
and the reason for that is because you can take your clothes
and make them look spectacular on you. Now it does that
right away straight out of the box you don't have to buy anything extra.
But what if you want to make tailoring even easier than it already is?
Well that's no problemo just use these. These are presser feet. Think of your
presser foot as like uh it's like a piece of metal that tells
your fabric what to do when it encounters your needle and
what not to do. Your sewing machine came with the presser foot that tells your
fabric to just lay flat, stay right where you are, I don't want
you to do anything too crazy. It looks something like this and some of
them might kind of vary a little bit by shape but usually
usually it's going to have either a v-shape or a u-shape in the front of it.
If you see that well then it's most likely that uh
that you have a general universal presser foot. It also has that
that notch right in the middle right there that long notch that's kind of
going across there. That is what's going to allow your needle
to go to have some travel from side to side so you can do a zigzag
stitch with this one as well. You might see some presser feet that
don't have that. See that little pinhole right in the front right there?
It might just have that and it might be missing that big
that big uh hole right behind there. That means you cannot
do a zigzag stitch with it. It can only do a straight stitch because the needle
can only go up and down. It won't be able to go from side to
If you just have this presser foot you will be
happy. I used just a standard universal general presser foot for
years. It's allowed me to tailor everything. I've tailored jeans,
jackets, hoodies, all that type of stuff no problem.
But like I keep saying on this channel you're gonna become addicted to
tailoring and you're gonna want to start to branch out and
we'll try new things. And job specific presser feet makes things
so much easier. Now some presser feet are brand specific meaning they only work
with brother or singer or genome machines. But that's
actually a lot more rare than you uh than you think or than you realize
because most are going to be universal meaning
they'll fit almost any machine depending on the shank.
There are two types of sewing machines. There's high shank and there's low shank.
And if you want to know which one you have just measure the distance between
the screw and uh and the lowered presser foot. If
it's an inch or more then it's high shank and if it's less than that then
it's low shank. Good rule of thumb is super high-end
machines well they're usually going to be a high shank.
And machines that won't break the bank like one that you can find on amazon or
ebay or that you can get at target or walmart
it's probably going to be a low shank. All of these presser feet that you see
here these are all low shank and they fit my brother ST-371HD.
They also fit my Necchi FA-16 so yeah they're interchangeable.
You might come across something like this. This is a zigzag
presser foot and this one is a spring action zigzag foot.
This thing does an incredible job of helping you sew over fabrics of varying
heights like uh like the hem on your jeans. A frustrating
problem that you might run into that I've run into like a hundred times
is when you're hemming jeans. A general presser foot might kind of panic be like
oh my gosh I don't know what to do how do I get over this no no no you don't
have to worry about that at all with this.
The spring action foot is going to go over it with ease because of that little
button right there. What you do is you press that button in and it's going to
raise up that presser foot just a little bit
to kind of get you over that hump on the hem of those jeans or whatever uh
whatever it is that you're sewing over. And then once you get over that hump
it's going to pop back out and it's going to go right back down and
boom you're good. You can also make monograms with this so if you ever
I don't know want to like monogram SD into all of your clothes
well you can do that. Be sure to tag me on IG if you do that.
This is a zipper foot and I'll give you one guess as to what it does.
No it doesn't spread jelly on your toast it's used to attach zippers to things
like jeans or jackets or even travel cases to your Nintendo
switch. That's a little oddly specific I know
someone tagged me on IG saying they did that
and their case looked absolutely dynamite that thing was awesome you
crushed it. Let's take a look at what we got going on in the middle right here.
On our normal standard general presser foot we had a whole bunch of
open space in the middle there for our needle to travel but on this one it's
kind of sort of the opposite. On a zipper foot our needle only travels
on the side here that's why we have so much wide open space right up here
right over on this side right over on this side. If you try using a straight
stitch with this presser foot you are gonna have a bad time.
And all the missing metal on the sides or in this case all the missing plastic
on the side in comparison to our general universal presser foot
what that's going to allow us to do is it's going to allow us to butt up
right next to our fabric so that we can get our zipper
right uh right in the spot well that we want it to be. Your sewing machine's most
likely going to have a setting for using this but again
I cannot stress this enough do not use this presser foot
with a straight stitch. This is like the it's like the cooking spray of presser
feet this is a non-stick foot. This is one of those presser feet that
seems like it might be unnecessary until you use it. This thing glides over
materials that that might be kind of stickier or
tactile like leather. You can use a standard presser foot with
leather but things like metal on leather kind of
creates a little bit of drag that you might not anticipate
and that's going to end up stressing your machine and it's going to make your
stitch look bad. I have a store brand north face jacket
that needed some TLC like most of my clothes do.
Had to take in the side seams because it looked like a tent and I took in the
sides just fine but the thing is is it's it's a water
repellent type of jacket so it was slightly tacky feeling and my machine
wasn't having a good time with that at all. But had I had this non-stick foot
that thing would have just flew right through it. Maybe not that
fast you don't want it to go too fast like
all of a sudden you've sewed like 200 feet you're like oh my gosh what just
happened. Sure wish I would have bought this
thing sooner that's for sure. Look at this frankenstein looking presser foot
this thing is a blind hem presser foot. Go look at the bottom of any pair of
dress pants and you're going to notice that
well you don't see anything at all. And that's because the stitches well it's
invisible and this presser foot is going to allow you to do just that.
You don't want a standard normal straight stitch on your pants it looks
bad it looks unprofessional and if if I did that everybody and their mother
would know that well that guy clearly doesn't know what
he's doing he wanted to have shorter pants but
wow um maybe maybe somebody should tell him no no let's just let him walk
around looking like a doofus. If you take your dress pants to a tailor and have
them professionally hem they're gonna use this presser foot.
It makes hemming dress pants well it makes it a five minute job. How a blind
hem works is the majority of their stitch travels on the
inside of your garment and then it pops back out and then it goes back in
making it barely visible. You can do a blind hem by hand and we've done that on
this channel before. Depending on what it is that you're
doing you might want to always do it by hand.
This presser foot is good if you're gonna blind hem pants all of the time. My
family always uses me to hem their pants and I hem my own too.
Actually no I take all of that back it's 2020 not 1860 just use a machine it's so
much easier. This is a rolled hem presser foot and
this guy is a straight game changer. If you do not get any
other presser foot at least get this one because go look at
the bottom of your dress shirt see that see that small little rolled hem it
looks good right it looks professional. What if you want to shorten that dress
shirt but you want it to still look professional if you wear it untucked?
Well that's where this bad boy comes in because you see that little loop in the
middle right there? When it's attached to your machine it's
gonna roll your shirt into a really small hem then your needle is gonna come
in and finish the job giving you a really nice professional look. I wish I
would have gotten something like this sooner because yeah you can roll a hem
manually but you have to just ever so slightly roll it and then you
gotta iron it down with a hot iron good look not burning yourself.
Just get this trust me. All of these presser feet well they're relatively
cheap. I just checked on Amazon a couple minutes ago and there's like a 42 piece
set on there for like 30 bucks which I'm actually gonna go pull the trigger on
because it has a couple things in that set that I'm missing in mine. So I'm
gonna go ahead and plug in a couple a couple missing pieces. Now go ahead go
ahead go continue your own tailoring addiction there is most likely a
tailoring tutorial in the end card. You know what I think?
SD out! See ya!
