-How To SHORTEN A T-Shirt Sleeve (PRO TAILORING METHOD)

Anthony Rivera
67 followers
39 Video Views·Dec 3, 2022
If you are a guy who loves wearing t-shirts you know, you know that the
number one thing that can ruin the fit of your t-shirt are just having sleeves
that are way too long. Well what if I told you that the way to fix that is to run
them under a sewing machine for like about 45 seconds. You can do that it's
super beginner friendly. I don't like long intros though. Let's uh let's get
into this. This is the t-shirt sleeve that we're going to be shortening right
here. Now first thing that we want to establish is the distance from our
original factory hem here all the way down to the edge. And on this sleeve it's
about 3 quarters of an inch. That number is important so don't forget it
remember that okay. Now let's roll our sleeve up like we're gonna pack a pack of
cigarettes in here and our name is Joey. I think you should subscribe. Excluding
our original hem down here let's say we wanted to take off one inch from this
sleeve. Well how do we do that? Do we just measure one complete inch from the edge
of our shirt to where we want it to end? No. Okay then well do we measure one inch
from where our original hem starts right there to the edge of our shirt? We don't
do that either. Our original hem is 3 quarters of an inch so we're only gonna
be taking off about a half an inch up here. And since this is folded over and
this is doubled up we have to account for both sides of our shirt right now.
I'm gonna preemptively say it yes I know it's gonna be about 1.2 inches as
opposed to an exact inch. I'm a tailor not a mathematician. You want to measure
one quarter of an inch from our original factory hem right there all the way to
the edge of our shirt. And let's uh let's put a pin in there so we don't lose this
spot. Click the join button. Now make sure everything is nice and even and just keep
putting pins all along the sides. When you're done make sure everything is nice
and even and flat and take your measuring tape and make sure that
everything is of an equal length and distance. Let's uh let's go sew this bad
boy! What kind of stitch are we using? A narrow zigzag stitch set to a stitch
width setting of about 1. Why? Because a zigzag stitch stretches- I should finish
chewing first. Because the zigzag stitch stretches and we want it to work in
tandem with our factory hem and maintain that elasticity. What kind of needle are
we using? A universal needle 80-12. Why? Because it's really all you need to
tailor your own clothes at home in addition to a denim needle both of which
can be found in any big-box store for like three dollars and fifty cents max.
And what kind of thread? Polyester. Why? Well unlike cotton thread polyester
thread stretches so we're able to actually do stuff in this shirt.
Everybody always asks me are tailored clothes as strong as non tailored clothes?
Yeah they are! Don't worry. I usually say take your time whenever you're tailoring
anything and this is a time where you really want to make sure you go slow.
Because there's a very particular spot that we're gonna be aiming for. We're
actually aiming for that first stitch on our original hem right there. So what I'm
gonna do is I'm gonna crank my lever and I'm gonna lower my needle right into
position there to make sure that that's exactly where it is. Make sure you keep
rotating your shirt around around the end of your sewing machine here because
it might kind of get bunched up which could throw your shirt out of alignment
and then well you're gonna end up with not a very straight stitch. See I'm
coming off my fabrics going that way a bit but I'm gonna drag it back this way.
I'm gonna lose my tension in my in my tension place but that's okay. There
perfect. I'm gonna make the sewing machine noise that everybody makes fun
of me about in the comments. This this is the finished product right here. Now
you can see that nice zigzag stitch that goes through there. It looks pretty
similar to a straight stitch but those zigzags are gonna give it still that
same elasticity that our original hem has. And this is the inside of our shirt
so kind of what we basically did is we took our shirt like this and we folded
it up and then we kind of sewed a stitch right up top here. So this is kind of
like a big lip kind of flopping around right here. ASD where'd your watch go? And
this lip right here we don't want to keep this on here so we got to snip this
bad boy off. Whoa whoa whoa whoa whoa you're using fabric scissors for this
right? Like you're not using any kind of random pair of run-of-the-mill drawer
scissors you have lying around? We don't need to finish this raw edge right here
with the zigzag stitch if we don't want to. If you want to use pinking shears as
opposed to regular shears you can absolutely do that. This is the outside
of our shirt and you can still see our original hem right there. You can still
see that first top stitch kind of peeking out right there and it still has
a ton of elasticity on it so I wouldn't worry about this in any way shape or
form. That's what's awesome about a really narrow zigzag stitch. Have at that
bad boy with an iron and then go check out the end card where we take in the
side seams of a baggy t-shirt. I'll see you on the other side. ST out. See ya!
